How to create a virtual machine from a windows 8 installed in a usb drive with bitlocker on

BAsically I created the vm with dissk2vhd and then mounting it on oracle virtual box but the bit locker is not letting the machine start. How can I bypass this
Many thanks
Fab

I'm not sure you can, bitlocker ties your installation to the hardware.
"To P2V a BitLocker drive, please suspend the protection"
REF: http://blogs.technet.com/b/chrad/archive/2012/03/12/upgrading-to-windows-8-consumer-preview-just-got-easier-using-vhd-tools-to-p2v.aspx

Similar Messages

  • How to create a Virtual Tour from a panorama

    Hey All,
    I'm trying to create a Virtual Tour from an already stitched 360 Panoramic interior photo (taken with a fish eye lens).
    Are there any programs throughout the Adobe Suite/Cloud  that will allow me to generate a virtual tour from this image, either automatically or manually?
    Or is it best to look into other software(s)?

    There are web services like Panoramio for that. I'm sure you could find some Flash plug-ins as well or some canned JavaScript stuff.
    Mylenium

  • Getting Windows Server 2008 to Create a Virtual Machine to Run Windows 8.1 Is Easy -- Not So Getting Windows Server 2012 To Do So

    I spent an entire work day trying to configure HYPER-V on Windows 2012 R2 Server to run Windows 8.1 in a virtual operating system. Gave up entirely on Windows 2012 R2 Server since no matter how I changed the memory configuration, it insisted there was
    too little memory available to perform bootstrap and initialization of the Windows 2012 R2 Server / Windows 8.1 combination. In vivid contrast, getting Windows 8.1 installed and operational under HYPER-V running on Windows 2008 Server is a snap. No whining
    from HYPER-V about a purported lack of memory. The machine has 2GB of main memory and nothing much running on it besides HYPER-V.  This situation is, of course, all my fault.
    MARK D ROCKMAN

    Hi Sir ,
    Personally , 2 GB for 2012R2 host and a windows8.1 VM is a little low .
    Also the memory consumption is different between 2012R2 and 2008 .
    I would suggest you run RAMmap.exe to check the free space , then you may see how many RAM can be used ：
    http://technet.microsoft.com/en-us/sysinternals/ff700229.aspx
    By the way , win8.1 is not in the
    supported guest OS list of 2008 hyper-v server .
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do you remove virtual desktops from a Windows Server 2012 R2 Pooled VDI collection

    All - I have created a Pool VDI Collection with 15 total virtual desktops in it. I need to reduce the number of virtual desktops in that collection to five. I have searched through the GUI, TechNet and done a number of Google searches but nothing helpful
    comes back. Does anyone know how to do this?
    I am guessing I cannot just delete them out of Hyper-V since the collection knows how many desktops it is supposed to have assigned to it.
    Thanks in advance.
    Will Smothers

    Hi Will,
    Thank you for posting in Windows Server Forum.
    We can use PowerShell command “Remove-RDVirtualDesktopFromCollection“ to achieve your goal.
    PS C:\> Remove-RDVirtualDesktopFromCollection -CollectionName "Virtual Desktop Pool" -VirtualDesktopName @("RDS-WKS-A27") -ConnectionBroker "rdcb.contoso.com"
    More information.
    Remove-RDVirtualDesktopFromCollection
    http://technet.microsoft.com/en-us/library/jj215515.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • How to create W7 recovery media from retail Windows 8

    I installed retail W8 on my new X230T upon purchase.
    Q drive is preserved, however I cannot find a way to create recovery media from it.
    Any suggestions?

    I'm not sure you can, bitlocker ties your installation to the hardware.
    "To P2V a BitLocker drive, please suspend the protection"
    REF: http://blogs.technet.com/b/chrad/archive/2012/03/12/upgrading-to-windows-8-consumer-preview-just-got-easier-using-vhd-tools-to-p2v.aspx

  • How to create an interactive pdf, hyperlinking text to a video on a usb drive?

    Creating an interactive pdf in InDesign CS6, hyperlinking text to a video.  Both pdf and video placed on a usb thumbdrive.  When clicking link on Mac a warning box came up, but after clicking Allow the video played fine.  On PC the warning box also came up but clicking Allow did nothing

    You'll need to use startDrag and stopDrag  in order to be able to move an object (the slider handle).  You will need to specify a rectangle that has 0 height for the drag limits.  The width of that rectangle will define the maximum value of the scroll (which will be the maximum value of your scale.
    Assuming you will have a linear scale for values along the drag line, the math is fairly easy to manage.  The x property of the handle at the minimum slider position should be 0.  You use the ratio of the current x position of the slider handle to the full width to determine what value to assign ( ex: ratio = handle.x / rectangleWidth).  So if the minimum value is 1K and the maximum value in 10K, you essentially have 9K represented by the length of the line, so the value provided by the slider position at any point along that line would be 1K + (ratio * 9K)
    You can use a MOUSE_MOVE event listener that you assign when the slider's MOUSE_DOWN event occurs to update the textfield as the slider is moved.  You can remove the MOUSE_MOVE listener when the slider's MOUSE_UP event occurs.
    So, in summary, you need to look into the startDrag and stopDrag methods, which will be inititiated using MOUSE_DOWN and MOUSE_UP events, respectively.  The MOUSE_DOWN event will create a MOUSE_MOVE listener that you will use to have a function continually update the textfield value displayed, while the MOUSE_UP event will have that MOUSE_MOVE listener removed.  The ratio of the x property of the slider to the total slideable distance will be used to determine the current value that the MOUSE_MOVE event handler assigns to the textfield display.

  • Error creating Virtual Machine from Oracle VM Template Input/output error

    Hi,
    I'm creating a virtual machine from the Oracle VM Template (OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM) I downloaded from eDelivery. I keep getting this error.
    =========
    Check Agent Version
    Check Address and NetworkType
    Register virtual machine img
    Register virtual machine geninfo
    Register networks
    Register virtual disks
    CopyFromTemplateAsync:Call agent
    CopyFromTemplateCallBack
    CallBack:end-success:end:failed:<Exception: ['dd', 'if=/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/seed_pool/OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM/System.img', 'iflag=direct', 'of=/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/running_pool/39_E_BIZ_1213_APP/System.img', 'bs=1M'] => dd: reading `/var/ovs/mount/ECE4B252180944D18EE19A4F6C9EC3F0/seed_pool/OVM_OL5U6_X86_64_EBIZ12.1.3_APPS_VIS_PVM/System.img': Input/output error
    4872+0 records in
    4872+0 records out
    5108662272 bytes (5.1 GB) copied, 205.557 seconds, 24.9 MB/s
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSXUtility.py", line 354, in utl_cp_vm
    run_cmd(args=cmd)
    File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
    raise Exception('%s => %s' % (args, err))
    Update virtual machine status:Error
    ========
    After endless searches there doesn't seem to be a lot of information out there.
    Any help will be appreciated.
    regards
    Dave

    It looks like your disk drive may have bad sectors on it, and when the dd copy reaches those bad sectors, it reports an error. Check /var/log/messages on the OVM server to see if it reports disk errors.

  • Copy my itunes library from desktop windows PC to an external USB hard drive

    What is the easiest way to copy my Itunes library from a windows PC to an external USB Drive?

    How to move iTunes library

  • How to create a new connection from SAPGUI to Test drive?

    Hi,
    I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
    I entered the following values for my new connection entry
    Description: SAP Netweaver
    Application server: 192.168.1.160
    Instance number: 01
    System ID: DB2
    SAProuter: /H/192.168.1.160/S/3201/H/
    But it does not work. Any idea about the values needed  for creating a new entry?
    Thanks in advance,
    Dariyoosh

    >
    Dibya R Das wrote:
    > Why are you entering a router string? Can't you reach a box directly from your machine?
    >
    > Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
    >
    > Remove the router string you wont need if the above works.
    >
    > - Regards, Dibya
    Hello there,
    Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
    Kind Regards,
    Dariyoosh

  • How to access for Virtual machines in System Center 2012 r2 by remote console through code?

    Hi All,
    I am new in System Center. I am using System Center 2012 R2. I have a web application written by dot net, which shows the list of virtual machines created in the SCVMM.  Now, I need to select a Virtual Machine from the list, and click a link named "console
    access". This will allow the console access to the virtual machine. How can I perform this task?
    Thanks in advance,
    Moohak

    The SCVMM VM console is an ActiveX application.
    It is installed with the SCVMM Console application.
    If you search around for the old SCVMM Self Service portal, you will discover how MSFT originally enabled this from a web front end.
    If you look at Windows Azure Pack you will find a new pattern using RDP gateway.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • "Low Memory Warning" and "fails to create a virtual machine"

    From ide.conf, I learnt:
    If you are getting the 'Low Memory Warning' Message Dialog while running JDeveloper, please increase the -Xmx value below from the default 768M to something greater, like 1024M or 1250M. If after increasing the value, JDeveloper is no longer starting up because it fails to create a virtual machine, then please reduce the modified -Xmx value.
    However,
    If I set it to a bigger value, say 512M, it fails to create a virtual machine.
    If I set it to a smaller value, say 400M, it throws Low Memory Warning after a short while.
    So I do not know how to do. Total physical memory of my box is 4G. Free physical user memory after starting jdev is 1.5G.

    512M isn't bigger, the default (according to your reading) is 768M...
    I just tried with JDeveloper 11.1.2.2.0 (64-bit machine, but using 32-bit JVM) - works fine with 1024M - just to confirm that my changes are working, 5024M does give me "unable to create virtual machine"
    Have you messed about with other settings?

  • �Unable to create the virtual machine. The error was -4�

    I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
    Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
    It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
    Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
    I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
    I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
    I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
    This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
    Software used
    Windows XP SP2
    Visual studio.net 2003 SP1 (the problem also occurred without SP1)
    .NET Framework 1.1 SP1
    JACE 1.1rc1_05
    JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

    Do you resolve the problem? If so what was the fix?
    I have been getting the Java Virtual Machine Launcher error message “Could not create the virtual machine” when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
    I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
    I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
    During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation – error invoking JVM error message.
    I have restarted the machine also.
    There are some remains of J2RE 1.4.2u13 still on the machine –even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
    I am running Win XP SP2 and IE6 SP2.
    Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

  • Error message: " Couldn't create Java Virtual Machine"

    Hi,
    I recently downloaded from IBM rational application developer for websphere software v 7.5. The installation was successful. But when I try to open it, the error message:"could not create the Java virtual Machine".
    I am working on Windows Xp pro. and java is automatically updated the current version jre 1.6/
    even I tried to run eclipse from the directory c:/programfiles/IBM/SDP still same problem.
    Please some one help me how to fix it.
    Thanks.

    Do you resolve the problem? If so what was the fix?
    I have been getting the Java Virtual Machine Launcher error message “Could not create the virtual machine” when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
    I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
    I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
    During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation – error invoking JVM error message.
    I have restarted the machine also.
    There are some remains of J2RE 1.4.2u13 still on the machine –even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
    I am running Win XP SP2 and IE6 SP2.
    Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

  • Create a virtual machine of OS X

    Hi! I need some help. I'm trying to create a virtual machine with OS X Yosemite installed. I have my macbook and I download an original version of OS X Yosemite from the app store. Now I want to install this OS on a virtual machine (using for example VirtualBox "www.virtualbox.org" because is the virtual machine software that I use) for try some things, install some apps, do a internal network with other machines and try some configurations, but I don't want to break my macbook (reinstall the OS is so boring). Can you give me some instructions or any manual to do this.
    Thank you very much!

    Boot Camp is not a Virtualization scheme -- it is only a set of drivers for the Mac-specific Hardware so that Windows can run nativley.
    I think you should be asking VMWare whether you can run that VMWare program on  a Mac, and how to install it. That is where you will need to turn for support if you run into problems.

  • No longer able to view virtual machine from Hyper-V Manager

    From the Windows 2008 R2 host machine, I can run the Hyper-V Manager and 'connect' to the Virtual Machine.  The window pops up with nothing but a gray background (clearly the same gray background of the log in screen), but no 'ctrl-alt-delete' prompt
    and no ability to log in.  This was previously working fine.
    Note that I can still make a Remote Desktop connection to the Virtual Machine and it works fine.
    Thanks.

    Hi,
    I never seen this issue before, base on my experience, it may cause by your AV soft block some critical components of Hyper-V host, please try the following exclude specific
    directories or process with your AV soft.
    •Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
    •Custom virtual machine configuration directories
    •Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
    •Custom virtual hard disk drive directories
    •Custom replication data directories, if you are using Hyper-V Replica
    •Snapshot directories
    •Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    •Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    The related KB:
    Virtual machines are missing, or error 0x800704C8, 0x80070037, or 0x800703E3 occurs when you try to start or create a virtual machine
    http://support.microsoft.com/kb/961804/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for