How to create AD contact object with multiple proxyAddresses?

Hello,
I need to create AD contact with multiple proxyAddresses to be used in mail routing.
How can I accomplish this using Java?
I can create an AD contact with single value fine. But I don't know how to populate a multivalue attribute.
proxyAddresses: smtp:mytestuser@Domain1
proxyAddresses: SMTP:mytestuser@Domain2
Also, how do I update a multivalue attribute? When first name and/or last changes, the proxyAddresses will need to be updated?
How can I do this?
Thanks
Khanh

This error is no longer coming up, it is now saying that it has an unsupported class version error. I believe this may be because the class file and library files have been complied under different versions, is there a method to check this?

Similar Messages

How to create a Contact Sheet with Adobe Photoshop CS5 from a disc with images in different folders

I got a disc with images files (mainly ai and psd files) in different folders and subfolders, how can I create a contact sheet including all the image files in different folders. (It seems that Adobe Bridge can only create a contact sheet by clicking the image files directly but not a folder including the images files)
thx!

Use the optional Contact Sheet II plugin which is found in Adobe's Downloads:
1) search for contact sheet in PS CS5 help
2) choose the first result and read carefully about the Photoshop Optional Plug-In Picture Packager
3) follow the instructions to download the zip file and note the location that you download it to.
4) follow the instructions to install the files.
I'm not sure how PS CS5 will handle ai vector image files or if you have to batch convert them to raster images first before using Contact Sheet II. Contact Sheet II allows you to choose a folder and Include All SubFolders as an option so you could create a Contact Sheet folder and copy all of your desired folders into that folder which will become subfolders of the main folder you choose for your contact sheet.

How to create a ActiveX Object with custom classes

Hi
I am trying to create a Active X object for some of the work I have done in Java to be used with VB, but I cannot get the Active X object to generate and it always come up with the following error:
Exception occurred during event dispatching:
java.lang.NoClassDefFoundError: uk/co/agena/minerva/model/Model
at java.lang.Class.getMethods0(Native Method)
at java.lang.Class.getDeclaredMethods(Unknown Source)
at java.beans.Introspector$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.beans.Introspector.getPublicDeclaredMethods(Unknown Source)
at java.beans.Introspector.getTargetEventInfo(Unknown Source)
at java.beans.Introspector.getBeanInfo(Unknown Source)
at java.beans.Introspector.getBeanInfo(Unknown Source)
at sun.beanbox.JarInfo.<init>(Unknown Source)
at sun.beanbox.JarLoader.createJarInfo(Unknown Source)
at sun.beanbox.JarLoader.loadJar(Unknown Source)
at sun.beans.ole.Packager.loadBean(Unknown Source)
at sun.beans.ole.Packager.generate(Unknown Source)
at sun.beans.ole.Packager.actionPerformed(Unknown Source)
at java.awt.Button.processActionEvent(Unknown Source)
at java.awt.Button.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForComponent(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForComponent(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
This appears to be beacuse the class uk/co/agena/minerva/model/Model is a custom class which is based on the software I am using. Does anyone know how I can get around this issue. I have tried incluijng those class files for the custom classes within the jar file, but I continue to get the same issue?
Any help would be gratefully received.
Thanks
Angie

This error is no longer coming up, it is now saying that it has an unsupported class version error. I believe this may be because the class file and library files have been complied under different versions, is there a method to check this?

How to create the Frame object with API in 6i?

do i create an item using d2fitmcr_Create, and then set the type or style to frame? or is it a graphics item that i have to create using a different function? ive tried various combinations with no luck.
ive looked at the frame object in the GUI, and cant figure out how to duplicate it using the API (the frame object is the thin line box with a label used to groups items visually on a form)
thanks!
[email protected]

Frame is a type of graphic d2fgracr_Create() (d2fgra.h) then set the type as required using d2fgras_graphics_typ():
Definition of Graphics types is in d2fdef.h
** Graphics Type (D2FP_GRAPHICS_TYP)
** [BPT]
#define D2FC_GRTY_ARC              0                                 /* Arc */
#define D2FC_GRTY_IMAGE            1                               /* Image */
#define D2FC_GRTY_LINE             2                                /* Line */
#define D2FC_GRTY_POLY             3                             /* Polygon */
#define D2FC_GRTY_RECT             4                           /* Rectangle */
#define D2FC_GRTY_RREC             5                   /* Rounded Rectangle */
#define D2FC_GRTY_TEXT             6                                /* Text */
#define D2FC_GRTY_GROUP            7                               /* Group */
#define D2FC_GRTY_FRAME            8                               /* Frame */All the various properties for setting up the associated block etc (if required) can be set through macros in d2fgra.h

How to create a Type Object with Dynamic select query columns in a Function

Hi Every One,
I'm trying to figure out how to write a piplined function that executes a dynamic select query and construct a Type Object in order to assigned it to the pipe row.
I have tried by
SELECT a.DB_QUERY INTO actual_query FROM mytable a WHERE a.country_code = 'US';
c :=DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c,actual_query,DBMS_SQL.NATIVE);
l_status := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt LOOP
DBMS_SQL.DEFINE_COLUMN(c,j,v_val,2000);
END LOOP;
FOR j in 1..col_cnt LOOP
DBMS_SQL.COLUMN_VALUE(c,j,v_val);
END LOOP;
But got stuck, how to iterate the values and assign to a Type Object from the cursor. Can any one guide me how to do the process.
Thanks,
mallikj2

Hi Justin,
First of thanks for your reply, and coming to my requirement, I need to report the list of items which are there in the dynamic select statement what am getting from the DB. The select statement number of columns may vary in my example for different countries the select item columns count is different. For US its '15', for UK it may be 10 ...like so, and some of the column value might be a combination or calculation part of other table columns (The select query contains more than one table in the from clause).
In order to execute the dynamic select statement and return the result i choose to write a function which will parse the cursor for dynamic query and then iterate the values and construct a Type Object and append it to the pipe row.
Am relatively very new for these sort of things, welcome in case of any suggestions to make it simple (Instead of the function what i thought to work with) also a sample narrating the new procedure will be appreciated.
Thanks in Advance,
mallikj2.

How to create a ClobDomain object with a default's different charset.

Hi,
I'm developing a 10.1.3. ADF Faces application that need to upload a File to a CLOB column. The user will usually upload a text file CP1252 charset, but in samples like this:
// read data into a character array
char[] data = {'0','1','2','3','4','5','6','7','8','9'};
// write the array of character data to a CLOB
writer = ((CLOB)my_clob).getCharacterOutputStream();
writer.write(data);
writer.flush();
writer.close();
The writer object is always a defaults charset writer.
Does anybody knows how to do this?
Thanks,
Edited by: Samuel Fisch on 05/01/2010 02:06

Samuel,
My understanding is that unicode should be able to hold all possible characters codes. So you upload something in unicode, store it in the db and later on view it from the db you should see the contents of the clob (in the default encoding of your pc).
The question for me is if the db can store all character codes. this is not the case if you use an oracle db and have not set the db character code to unicode (i.e. utf-8). In this case all characters of the input stream which are not part of the db character set are mapped to <b>one</b> special character code which you can't read. When you read the clob back you see some strange characters.
This is not the problem of writing/reading the clob but a problem with the db character set.
If you load data to the clob from a system using windows-1252 character set and this data contains some special characters like 'öäü', the db character set is set to utf-8, you should be able to read the clob data on a system using iso-8859-1 character set (or any other which have 'äöü') and see the special characters. That's the reason the reader/writer uses the system default character set.
If you see a different behavior, describe where you see the error or wrong characters.
Timo

How to create a date object with a specific time?

How can I create a date with today's date but with a specific time, say: 20:00:00?
Thanks in advance.

Don't forget about those pesky milliseconds!I'd have gotten away with it too.. if it hadn't been
for that pesky BigDaddyLoveHandles.I'm in top form today. On the drive in to work I managed to
push two scooter riders off the road and gave the finger to
a Prius owner.

How to create a circle object with center(lat/long) and radius(kilo)?

Hi
I want to create a circle in my table, the data I have are the coordinate of center(lat/long) and the radius of the circle. The srid of the table is lat/long.
Did I have to use some fomula to compute the coordinate of three points on the circle? If it's true, is there any example procedure you can show me?
Thanks
Lannie

When a circle is created using SDO_BUFFER in geodetic space,
the result is a circle with stroked arcs (as in arc_densify function).
So the result from SDO_BUFFER will be a valid polygon without arcs,
but approximate circle with straight lines.
For example, in the example given by Dan, this is what you get:
SDO_GEOMETRY(2003, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 1003, 1), SDO_ORDINATE_ARRAY(-120, 42.09003, -120.03128, 42.086958, -120.06042, 42.0779524, -120.08543, 42.0636292, -120.1046, 42.0449675, -120.11663, 42.0232424, -120.1207, 41.9999365,
-120.11654, 41.9766391, -120.10445, 41.9549369, -120.08526, 41.9363067, -120.06028, 41.9220148, -120.0312, 41.9130321, -120, 41.9099686, -119.9688, 41.9130321,
-119.93972, 41.9220148, -119.91474, 41.9363067, -119.89555, 41.9549369, -119.88346, 41.9766391, -119.8793, 41.9999365, -119.88337, 42.0232424, -119.8954, 42.0449675, -119.91457, 42.0636292, -119.93958, 42.0779524, -119.96872, 42.086958, -120, 42.09003))
siva

How to create a PDF form with multiple approvals?

Hello ,
I am trying to add approvals to a pdf I created . I am trying to add approvals such that
once the form is filled up by the user and emailed to the concerned person (admin) , they approve the form , this action inturn sends the pdf to the next person who has to approve it and so such that the pdf file is "approved" when all approvers has put their approvals on it nd then the form gets sent back to the admin.
Ive been trying various ways to get this done,
any help wil be much appreciated , maybe its a simple fix and im missing something , but im very new to live cycle and have only designed basic forms so far.
Thanks and Regards,
Akshay

Hello ,
I am trying to add approvals to a pdf I created . I am trying to add approvals such that
once the form is filled up by the user and emailed to the concerned person (admin) , they approve the form , this action inturn sends the pdf to the next person who has to approve it and so such that the pdf file is "approved" when all approvers has put their approvals on it nd then the form gets sent back to the admin.
Ive been trying various ways to get this done,
any help wil be much appreciated , maybe its a simple fix and im missing something , but im very new to live cycle and have only designed basic forms so far.
Thanks and Regards,
Akshay

How to create a .java file with multiple classes

I have all the below classes declared in a file say ABC.java under
a common package called somepackage
Abstract class A
Void abstract metod1();
Void metod2();
Class B
void method3();
Void method4();
Class C
void method1();
Void method2();
In Client.Java
On compiling the Client.Java I get errors
Import somepackag.*;
Class Samp extents A
void Method1()
Public class Client
A a1 =new Samp(); //error undeclared class A
B b1 = new B1();//error undeclared class B
C c1 = new C1();//error undeclared class C
is it possible to have all the class declared in one file ( i dont need mutiple classes, as this file will be autogenerated , i need all classes in one file) and use the classes inside this in the some client app
regards
MP

Peetzore wrote:
As long as you have only one public class and your .java file is named after it you shouldn't have any problem.I did exactly that, but still i get the same error "Cannot find symbol"
i have used the import command on top as import somepackage.*;
Edited by: mpjava on Jun 2, 2009 1:29 AM
Edited by: mpjava on Jun 2, 2009 1:30 AM

Creating AD Contact Objects using IDM 8

Hi,
Can anyone provide a code example of how to create a contact object in ad?
I've tried creating it the same way I create a user object (checkin, checkout etc...) but it failed.
Regards,
Roman

I have AD user objects called Jason and Adrian and AD contact objects called Phil and Ralph that I am using as my test searches.
I've had a look at csf-unified.log myself and it looks like no matter what is in jabber-config.xml or in the CUCM Directory Service/Service Profile, the LDAP search is always of the form;
Query::RunQuery - [LDAP-FILTER] Executing query with filter: (&(objectCategory=person)(objectClass=user)(ANR=jason*))
Thanks for your continued assistance.

Implement a View Object with multiple entity objects

Hi
In 'How to' section on the 'otn.oracle.com' (Jdeveloper) web site is tutorial how to implement a View Object with multiple updateable dependent entity objects.
It allows user to insert an employee and a department at the same time.
But I would like to change this example to insert a new department only if it does not already exist. How to change this sample?
Is there any other way to this?
Thanks
Regards
Gorazd

Once again the structure, sorry.
ViewObject
|-ParentEntityObject
..|-PId
..|-PAttribute
..|-CId (FK)
|-ParentChildAssociation
|-ChildEntityObject
..|-CId
..|-CAttribute
Christian

Re: How to create More two class with one object

haii,
         i have small information How to create More two class with one object,
bye
bye
babu

Hello
I assume you want to create multiple instance of your class.
Assuming that you class is NOT a singleton then simply repeat the CREATE OBJECT statement as many times as you need.
TYPES: begin of ty_s_class.
TYPES: instance   TYPE REF TO zcl_myclass.
TYPES: end of ty_s_class.
DATA:
lt_itab      TYPE STANDARD TABLE OF ty_s_class
                 WITH DEFAULT KEY,
ls_record TYPE ty_s_class.
DO 10 TIMES.
    CLEAR: ls_record-instance.
    CREATE OBJECT ls_record-instance.
    APPEND ls_record TO lt_itab.
ENDDO.
Regards
Uwe

How to create a view object and attach with extended AM

Hi,
I tried to create new vo and attach this vo with the extended AM. But it is throwing error like 'PC.NAME : invalid identifier' (Actually this PC.NAME is exiting one).
Now i want to know how to create a view object similar like seeded one but with one additional condition in the where clause.
It is possible though extension, but i want to create two view object similar like seeded one, one with some other condition in the where clause
and another one with some other condition.
So for my requirement, i'll extend one VO and i'll add my condition but how to do it for second condition.
But i want same seeded VO with two different condition.
Any suggestions please,
SAN

SAN,
There is no need to attach the newly created VO with extended AM. You need to attach the same with the standard AM.
Regards,
Gyan

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

How to create AD contact object with multiple proxyAddresses?

Similar Messages

Maybe you are looking for