How to create an exe file using labview and arduino?

I bought Arduino Mega 2560. I have installed Arduino IDE 1.7.3. I am using Windows 7 64bit version and Labview 2012. I started working after the compilation of LIFA_Base File with Arduino IDE and with labview.
My application is: I have connected my arduino to my PC via USB for read input/output pins. I have to read all the time an analogue input from arduino and I have to draw the graphical representation of the input. I would like to know if I can create an exe file of this application. I would like to use the created exe file to another PC without labview installation.
Please help me to resolve the problem.
Regards

Yup you sure can. With Application Builder, that is bundled with several LabVIEW packages you can make an EXE, and then make an installer that can include the LabVIEW Run-Time engine (free) and you'll also need the VISA run-time for talking to serial devices like your Arduino.
Then you should be able to run that installer on any normal Windows PC and without the development environment be able to run your program.
Note that currently Student, and Home versions of LabVIEW do not have the application builder since it is intended for learning, and hobbyist, not for distributions.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Similar Messages

How to create smaller .exe file use JBuilder7

I am currently using JB7(EE), which can create native executable file for me. But I found it so foolish that add so many unneed classes to .exe(As I can use WinRar open it, but cannot change it).
Does anyone know how to reduce the .exe?
ps: As I use castor, so I had to include castor class in it, but I really don't want to add all of these to it.

In the Wizar you employ to make the native executable,
in the second step the Wizard ask you what to do with
the libraries you have employed in the proyect,
include all them include only the classes and
resources nedded, or not include. This way you'll be
able to control what is in you .exe file.
AbrahamYes, I had tried it, and tried every possible combination/permutation of the four choice.
But still bigger than it can be.
For example: I used castor.xml library, but JBuilder include all castor include xml parser, html parser, xhtml parser, etc.
As castor.xml --> castor.xxx(I cannot remember its name) --> castor.html-->...
So JB7 maybe confused by the complex deps.
So JB7 include ALL in my exe fiel.
It may be impossible to create smaller .exe file with normal way.
So anyone know any other way to create .exe file with the .jar file?
As I can change the content of .jar, but cannot to .exe.
thx for continous reply

How to create the exe file for java project.

How to create the exe file for java project.
am done the project in java swing , i like to create the project in exe format, so any one help for me,
send the procedure for that.
thanking u.

How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
and got several useful links.
Better search terms might yield even better results.
Sheesh.

How to create the exe files for java application

How to create the exe file for java application?
got any software to do that?
Thanks

In terms of converting java applications into exe files, there are 3 schools of thought:
1) Instead of converting it to an exe, convert it to a jar file. Jar files are more portable than exe files because they can be double-clicked on any operating system. The caveat is that a Java interpreter must be installed on the target computer for the double-clicking to work.
http://developer.java.sun.com/developer/Books/javaprogramming/JAR/
2) Create an exe launcher that, when double-clicked, attempts to find a Java interpreter on the local computer and launches the Java application. The exe file is still double-clickable but whether your java application runs depends on whether a Java interpretor is installed on the target computer.
http://www.sureshotsoftware.com/exej/
http://www.objects.com.au/products/jstart/index.jsp
http://www.duckware.com/products/javatools.html
http://www.ucware.com/jexec/
http://www.rolemaker.dk/nonRoleMaker/javalauncher/
http://www.jelude.cjb.net/
http://thor.prohosting.com/~dfolly/java/index.html
3) Create an exe launcher that bundles a Java interpretor. Same as above but when the exe file is double-clicked, it searches for a Java interpreter and if one is not found, it installs one on the target computer. The caveat is that the exe file would have an overhead of 10 MB in size for the interpreter.
http://www.excelsior-usa.com/jet.html (evaluation version available)
4) Convert the Java application into a native exe file. The caveat is that if you use Swing for your GUI, it won't be converted. Also this option is still somewhat experimental.
Can't think of any free options right now.

How to create new XML file using retreived XML content by using SAX API?

hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
    private TransformerHandler handler;
    Document meta_data;
    private StringWriter meta_data_text = new StringWriter();
    public void startDocument() throws SAXException {
    void startValidation() throws SAXException {
        StreamResult streamResult = new StreamResult(meta_data_text);
        SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
        try
            handler = factory.newTransformerHandler();
            Transformer transformer = handler.getTransformer();
            transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
            transformer.setOutputProperty(OutputKeys.INDENT, "yes");
            handler.setResult(streamResult);
            handler.startDocument();
        catch (TransformerConfigurationException tce)
            System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
        super.startDocument();
    public void startElement(String namespaceURI, String localName,
            String qualifiedName, Attributes atts) throws SAXException {
        handler.startElement(namespaceURI, localName, qualifiedName, atts);
        super.startElement(namespaceURI, localName, qualifiedName, atts);
    public void characters(char[] text, int start, int length)
            throws SAXException {
        handler.characters(text, start, length);
        super.characters(text, start, length);
    public void endElement(String namespaceURI, String localName,
            String qualifiedName) throws SAXException {
        super.endElement("", localName, qualifiedName);
        handler.endElement("", localName, qualifiedName);
    public void endDocument() throws SAXException {
    void endValidation() throws SAXException {
        handler.endDocument();
        try {
            TransformerFactory transfactory = TransformerFactory.newInstance();
            Transformer trans = transfactory.newTransformer();
            SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
            DOMResult dom_result = new DOMResult();
            trans.transform(sax_source, dom_result);
            meta_data = (Document) dom_result.getNode();
            System.out.println(meta_data_text);
        catch (TransformerConfigurationException tce) {
            System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
        catch (TransformerException te) {
            System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImran

Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code}

How to create a exe file of a .class file

how to create a .exe file for windows .class file of java
please answer this so that i can complete the project to be submited to collage

There is a program called JET. Is enables you to create .exe files of .class files.
This is the URL:
http://www.excelsior-usa.com/jet.html
Succes
--=tReShR=--

How to execute a exe file using javascript on app window.load.

How to execute a exe file using javascript on app window.load.

Hi sb00349044,
As I have already mentioned in multiple replies to your previous questions, the SUMO forums focuses on providing help to end users with usage-questions and issues.
For developer-related questions, please refer to one of the many resources readily available that I have linked to in the past:
* [https://developer.mozilla.org/en-US/Firefox_OS MDN]
* [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow]
* [https://lists.mozilla.org/listinfo Mozilla Mailing Lists]
- Ralph

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Please help me with my electrical engineering homework : temperature control and watering system for greenhouse using labview and arduino

temperature control and watering system for greenhouse using labview and arduino
spesification :
1. max temp : 28 celcius (when temperature is more than 28 celcius, fan ON)
2. min temp : 20 celcius (when temperature is under 20 celcius, heater ON)
3. watering system : aquaponic (grow plant and fish in separate tank but connect each other). Plant roots help filter water for fish. Fish poop for plants fertilizer. So I need a pump to distribute water.
Please help me create VI file simulation.. I'm sorry I'm not fluent in English. May God bless you all
Attachments:
YOOOSHH.vi ‏88 KB

Duplicate thread. Please keep the discussion in that thread where you already have a response. It is also the more appropriate thread for your question.
Lynn

How to create executable(.exe) file to extract a .zip using winzip self extractor

Hi i wanted to create an .exe file extract the content from .zip using winzip extractor, please
see the below piece of code. the same is working in 32bit machine, but not working in 64bit machine windows server 2008
private bool CreateExeFile(string directoryPath, string zipFileName)
bool status = false;
string emuPath = String.Empty;
emuPath = System.Configuration.ConfigurationManager.AppSettings["winzipSe32Loacation"];
//string emuParams = @" -e " + directoryPath + "\\" + zipFileName + ".zip " + directoryPath;
string emuParams = " " + directoryPath + zipFileName + ".zip -win32 -y ";
//string emuParams = " " + directoryPath + zipFileName + ".exe a " +zipFileName +".Exe -mmt -mx5 -sfx" + directoryPath;
try
Process p = new Process();
ProcessStartInfo psI = new ProcessStartInfo(emuPath, emuParams);
psI.CreateNoWindow = false;
psI.UseShellExecute = true;
p.StartInfo = psI;
p.Start();
p.WaitForExit()
status = true;
catch
status = false;
return status;
Regards
Bharath

Hello,
What error with you program?
if the reply help you mark it as your answer.
Free No OLE C#
Word, PDF, Excel, PowerPoint Component(Create,
Modify, Convert & Print)

How to create a .exe file for a java application

Hi, I want to create a .exe file for a java application I am developing so that I can schedule it to run at a particular time using Windows Scheduler on WinNT. Is there any way to accomplish this? Or is there any other way in which a Java application can be scheduled to run at a particular time on Windows everyday?

Create a .bat file and run that. Just have, in the .bat file:
java YourClassName Alternatively, you can use javaw YourClassName (without *.bat, just put it into Windows Scheduler like suggested above).
using javaw won't pop up any window...

How to create fourier transform properties using labview

Hi everyone
i am a new user to Labview and i only have 2 weeks left to complete an assignment.
This assignment involves the implementation of the various types of fourier transform properties using Labview. These properties include linearity, time shifting, frequency shifting, time scaling,
I do not really know how to implement them using Labview
PLS HELP!!!
Thanks

i am refering to the fourier transform properties listed below:
A) time shifting
x(t-a) ------- > exp (-jwa) X(w)
For the time shifting property above, i have problem creating the exponential term using labview
B) time scaling
x(at)-----------> 1/a X (w/a)
C) Time convolution
Y(w) = F[h(t) * x(t)] = H(w)X(w)
where * stands for the convolution operation and F stands for fourier transform
Please provide diagrams if possible. Thank you
PLEASE HELP!!!!!!!! THANKS!!!!!!!

How to link a exe file in labview

hlo
I am using labview 7, is it possible to link a .exe file to labview,
i am using a stepper motor controller i have their software to control & set & change settings etc.. & that is a exe file which is a dos based programme, is it possible to link that exe to labview, & i should open & run that programe (motor controller) from labview.
thanks
sasi

Try to launch it with "system exec.vi." This function can execute command line commands and should be able to launch any executable.
aartjan

How to create a .exe file with eclipse 3.1

Hello every body. I want to know how create a .exe file with eclipse 3.1. A friend tell me it's possible but he forgot how ! So I ask my question ay you, how can I do that? I think it's like in Dev-C++, when he compiling the programme he create
a .exe file but in eclipse, i don't know how do that. Please help me, I have finish some programs but I don't know how create .exe file for give their at my friend.
Thank's.
P.S : I'm a young french so maybe there are some mistake on my post. I hope you understand it.

There might be a plugin in eclipse to do this, but I don't know what it is.
The normal way to deploy a program is to create an executable jar file. This will be a .jar not a .exe.
Or you can try ggogle.
http://www.google.co.uk/search?q=java+exe

SAX: How to create new XML file using SAX parser

Hi,
Please anybody help me to create a XML file using the Packages in the 5.0 pack of java. I have successfully created it reading the tag names and values from database using DOM but can i do this using SAX.
I am successful to read XML using SAX, now i want to create new XML file for some tags and its values using SAX.
How can i do this ?
Sachin Kulkarni

SAX is a parser, not a generator.Well,
you can use it to create an XML file too. And it will take care of proper encoding, thus being much superior to a normal textwriter:
See the following code snippet (out is a OutputStream):
PrintWriter pw = new PrintWriter(out);
      StreamResult streamResult = new StreamResult(pw);
      SAXTransformerFactory tf = (SAXTransformerFactory) TransformerFactory.newInstance();
      //      SAX2.0 ContentHandler.
      TransformerHandler hd = tf.newTransformerHandler();
      Transformer serializer = hd.getTransformer();
      serializer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");//
      serializer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM,"pdfBookmarks.xsd");
      serializer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM,"http://schema.inplus.de/pdf/1.0");
      serializer.setOutputProperty(OutputKeys.METHOD,"xml");
      serializer.setOutputProperty(OutputKeys.INDENT, "yes");
      hd.setResult(streamResult);
      hd.startDocument();
      //Get a processing instruction
      hd.processingInstruction("xml-stylesheet","type=\"text/xsl\" href=\"mystyle.xsl\"");
      AttributesImpl atts = new AttributesImpl();
      atts.addAttribute("", "", "someattribute", "CDATA", "test");
      atts.addAttribute("", "", "moreattributes", "CDATA", "test2");
       hd.startElement("", "", "MyTag", atts);
String curTitle = "Something inside a tag";
          hd.characters(curTitle.toCharArray(), 0, curTitle.length());
    hd.endElement("", "", "MyTag");
      hd.endDocument();
You are responsible for proper nesting. SAX takes care of encoding.
Hth
;-) stw

How to create an exe file using labview and arduino?

Similar Messages

Maybe you are looking for