How to create and install a toolbar to a browser using java

Hi all,
Can any one guide me about how to create and install toolbar to a browser using java ??
please any one help me about this,i am not getting any idea about this..
Thanks and Regards
Sandesh S

I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

Similar Messages

How to create and execute PL/SQL program or Procedure from Java (JDBC)

hi all,
user will enter the Pl/Sql program from User-Interface. that program has to be create in DB and execute that.
due to some confusions, how to execute this from Java, i (user) entered the same logic through a Procedure.
my Java code is
Statement st = con.createStatement();
Statement.execute(procedure_query); // procedure name is myPro
CallableStatement cs = con.prepareCall("{call myPro}");
(as given in SUN docs - http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html)
but its not creating the procedure.
and i tried to run a procedure (which is already created) with CallableStatement, and this is also not working.
how to get this.
thanks and regards
pavan

Hi,
SInce the PL/SQL block is keyed in dynamically, you probably want to use the anonymous PL/SQL syntax for invoking it:
// begin ? := func (?, ?); end; -- a result is returned to a variable
CallableStatement cstmt3 =
conn.prepareCall(“begin ? := func3(?, ?); end;”);
// begin proc(?, ?); end; -- Does not return a result
CallableStatement cstmt4 =
Conn.prepareCall(“begin proc4(?, ?); end;”);
SQLJ covered in chapter 10, 11, and 12 of my book furnish a more versatile dynamic SQl or PL/SQL mechanisms.
Kuassi
- blog http://db360.blogspot.com/
- book http://db360.blogspot.com/2006/08/oracle-database-programming-using-java_01.html

Cookbook on how to create and attach networks to OVM for SPARC using OPS Center

I have a smallish installation of a number of SPARC T5-4s, T5-2s and T4-2s provisioned with OVM for SPARC and managed by OPS Center 12c2.
The OPS Center node is only connected to the ILOM/mgmt network, whereas the individual SPARC systems are connected to several other networks, some of which are VLAN tagged.
I am somewhat confused by the actions necessary to create these additional networks; I read the "how to"s however, I am still at a loss as to how to start. When I try to create a fabric, it wants a network. When I try to create a network, it wants a fabric.
Does anyone have a simple guide on how to add an additional network that I can then attach to my server pool?
Thanks

Hi 2682888
Look this Video Oracle Enterprise Manager Ops Center 12c Assigning Networks to a Network Domain
HTH
Michele V.
If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation

How to create and deploy a war file on wls using the console

          my question is how to deploy the simpleSession.jsp example in the weblogic/samples/examples/jsp/
          dir examples as a war file on wls cluster what are the steps to do so.. thanks
          in advance


[att1.html]

How to create a Win 2000 shortcut for my application using Java?

Hi
How can I create a shortcut from within Java that would be on the desktop?
Cheers, Ras

Check out installanywhere. There are other ways but that is probably the easiest.
hth,
m

How to create and save playlist using JMF?

Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
also how can i play .DAT files using JMF?
Does JMF supports AVI,Asf files?

Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
also how can i play .DAT files using JMF?
Does JMF supports AVI,Asf files?

How to create and configure proxies in ADF mobile using OWSM client agent?

Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
Raj

Hi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
This little FAQ will only cover the new version of MSI Bluetooth Software Package.
First thing too do is unistall any older version of the MSI Bluetooth Software.
Do this through the Add/Remove program applet in your control panel.
There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
Create following code in Notepad and save it as MSILD.reg, then run the file.
;-->Code start
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
"DrvSetup"="1"
"Version"="1.4.2.10"
;-->Code end
Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
If the Bluetooth services is asking for a valid licens.dat then you should do the following.
Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
Unzip the the patcher and then run the BTWPatcher.exe program.
Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks

How to create an install cd with the final cut pro x app if the app comes from App.Store?

How to create an install cd with the final cut pro x app if the app comes from App.Store?

Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

How to Deinstall And Install OEM again

hi Experts,
Can somebody pls explain me how to deinstall and install OEM. ????
I can not view any options in OEM. it referes a incorret machine name.

DBMS Direct ,
As u mentioned emca didn't work for me.
when I issued the command it gave me the following ...
Oracle@DB1 $ emca -deconfig dbcontrol db -repos drop
Incorrect usage:
oracle.sysman.emcp.EMConfigAssistant [options] [list of parameters]
Options:
-a :configure for an ASM database
-b :configure for automatic backup
-c :configure a cluster database
-e <node> :remove a node from the cluster
-f <file> :specify the file name that contains parameter values
-h :help
-m :configure EM for a central agent
-n <node> :add a new node to the cluster
-r :skip creation of repository schema
-s :silent mode (no user prompts
-x <db> :deletion of a SID or DB
-RMI_PORT <port> :specify the RMI port for DB Control
-JMS_PORT <port> :specify the JMS port for DB Control
-AGENT_PORT <port> :specify the EM agent port
-DBCONSOLE_HTTP_PORT <port> :specify the DB Control HTTP port
The script will prompt for any required data that is not specified in a configuration file. The script always prompts for all required passwords. If you use a configuration file, the file may contain any of the following specifications, as shown, with the specified values correctly filled in:
And there is more to this msg.
So I think manually droping sysman would work.
So issuing only
drop user sysman cascade;
whould be enough ??? or do I have to do anything else ????
And after that how do I recreate it ....???
Is it using ,
emca -deconfig dbcontrol db -repos create.
or using some other way ????

How to download and install webutil in FORMS 10G 10.1.2.0.2

Where i find all the step to
how to download and install webutil in FORMS 10G 10.1.2.0.2
i DON'T FIND NOTHING OF VERY GOOD TO FOLLOW !!!

hi
u do not need to install any webutil in R2 u just need to configure few things.
please read the following notes and try to configure.
How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
Solution
Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
here are steps to get a small test form running, using WebUtil 1.06.
Note: [OraHome] is used as an alias for your real oDS ORACLE_HOME.
Feel free to copy this note to a text editor, and do a global find/replace on
[OraHome] with your actual value (no trailing slash). Then it is easy to
copy/paste actual commands to be executed from the note copy.
1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
2) Copy or move jacob.jar and jacob.dll
[JacobStage] is the folder where you extracted Jacob, and will end in ...\jacob_18
     cd [JacobStage]
     copy jacob.jar [OraHome]\forms\java\.
     copy jacob.dll [OraHome]\forms\webutil\.
The Jacob staging area is no longer needed, and may be deleted.
3) Sign frmwebutil.jar and jacob.jar
Open a DOS command prompt.
Add [OraHome]\jdk\bin to the PATH:
     set PATH=[OraHome]\jdk\bin;%PATH%
Sign the files, and check the output for success:
     [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\frmwebutil.jar
     [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
you may skip this step. Otherwise,
Create a schema to hold the WebUtil stored code, and privileges needed to
connect and create a stored package. Schema name "WEBUTIL" is recommended
for no reason other than consistency over the user base.
Open [OraHome]\forms\create_webutil_db.sql in a text editor, and delete or comment
out the EXIT statement, to be able to see whether the objects were created witout
errors.
Start SQL*Plus as SYSTEM, and issue:
     CREATE USER webutil IDENTIFIED BY [password]
     DEFAULT TABLESPACE users
     TEMPORARY TABLESPACE temp;
     GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
     CONNECT webutil/[password]@[connectstring]
     @[OraHome]\forms\create_webutil_db.sql
     -- Inspect SQL*Plus output for errors, and then
     CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
Reconnect as SYSTEM, and issue:
     grant execute on webutil_db to public;
5) Modify [OraHome]\forms\server\default.env, and append [OraHome]\jdk\jre\lib\rt.jar
to the CLASSPATH entry.
6) Start the OC4J instance
7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
It is important to generate the PLX, to avoid the FRM-40039 discussed in
Note 303682.1
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
8) Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Add an ON-LOGON trigger with the code
         NULL;
to avoid having to connect to an RDBMS (optional).
Create a new button on a new canvas, with the code
         show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
      http://server:port/forms/frmservlet?config=webutil
10) Run your form.

How to create and see the user interface of helloworld sample??

hello friends,
i have deployed the hello world sample
now i want to know how to create and see the user interface of hello world sample.
thanks and regards..

If you go to bpel console host:port/BPELConsole (in a dev install, localhost:9700), click on your process, we will generate, based on the describing wsdl a UI for you ..
hth clemens

HT2534 How to access and install appstore free apps without providing credit card number because I do not have one?

How to access and install appstore free apps without providing credit card number because I do not have one?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...
To summarize, you must first download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

Networking problem after a zone is created and installed

Hi all,
I've got a networking problem after a zone was created and installed on a Solaris 10 box. The box was configured with two NICs, one (e1000g0) with a public IP address, the other one (e1000g1) with a private IP address and connected to a local switch. All worked fine so far.
Then I created a local zone with shared networking (e1000g1). The zone has a private IP address which is in the same subnet as e1000g1 on the global zone. After some time, I noticed that I could not access (ssh, ping) the global zone. Then after some time, the global zone became available. The problem happened quite frequently.
Also I observed that: 1) When the global zone was unavailable from outside, it was available (ssh, ping) from another box within the same subnet (e1000g0); 2) If I shutdown e1000g1, the problem was gone.
Any idea what caused this problem?
Many thanks,
Xiaobo

It was a route problem.

How to create and execute a function whose return value is a table

hi folks ,
i would like know how to create and execute a function whose return value is a table ,
am new to pl/sql ,
my statement for the function is
SELECT ct.credential_code, c.expiration_date
FROM certifications c, credential_types ct
WHERE ct.crdnt_id = c.crdnt_id
AND c.person_id = person_id;
i would like to have the result of the above query as return value for the function.
Thanks in advance ,
Ashok.c

hi Ps ,
Can you please do small sample ,
that would help me in clear understanding
thanks in advance
ashok.c

How to create and install a toolbar to a browser using java

Similar Messages

Maybe you are looking for