How to create and print contact sheet using photoshop elements 10?

how to create and print contact sheet with photoshop 10?

Which operating system are you using?
On a windows system you can use the Organizer
http://www.dummies.com/how-to/content/how-to-print-contact-sheets-in-photoshop-elements-.h tml
On a Mac, File>Contact Sheet II within the pse 10 editor

Similar Messages

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

How to create a Proof/Contact sheet in CS5??

Hey there,
I'm using Bridge CS5 and trying to work out how to create a Proof/Contact sheet as then save as a PDF?
I found a tutorial online, but when I followed the instructions and went into the 'Output' Workspace... the actual Output Panel doesn't come up, and I'm confused why.
Please help

Hi there
The help is saying to click View > Toolbars > Formatting (in case the toolbar has been turned off)
Perhaps the image below will better assist in locating the icon.
Cheers... Rick

How to Create and Deploy Web Services Using Oracle 9i JDeveloper

Hi,
My Question is how to create and deploy Web Services using Oracle 9i JDeveloper.Anybody please give me a detailed Reply.Please Reply to [email protected]
Hopr to Hear From you,
Regards,
G Sreekumar

You could use datasources. You should do this in your BC4J Configuration. Then when deploying your applicaiton use the command -installDataSource (from admin.jar) to create the right datasource.
You could probably use the name of your connection + "DS" so you can also use it locally in JDeveloper as JDev seesm to create this automaticly for your Connections.

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

How do you create and save icc profiles using photoshop?

How do you create and save icc profiles using photoshop?

You don't. Color profiles require specific measurement hardware and software.
Mylenium

How can I save my contact sheets in Photoshop Lightroom?

How can I save my contact sheets in Photoshop Lightroom? I see that you create the sheets under the Print tab but how can I save them as jpgs to my desktop?

Kittie,
I use this workflow and it works really well for me; it's really strange that it
i did
work for you and now it doesn't.
I had a quick dabble and
i may
have an explanation. If I read your error message it looks like "New Folder" is trying to create a folder ~kittie/Desktop/3 Working/Contact Pages. However, the automator "create folder" won't create folders recursively like that - it will only work if "3 Working" already exists. Certainly I was able to reproduce the 'quick flash error message and bomb out with no results' effect by asking it to produce a directory from one that didn't already exist. When I added two Finder actions it didn't work as I expected - producing 74 files in subdirectories that just looped round and round when I expected one file and one directory.
I added a shell script that renames the files too and it all works just dandy for me. If you let me know your e-mail I'll post the automator "app" file and shell script I use. It gives you sensibly named files instead of the sdkjfdfadkljfb.jpeg thing that comes out of automator.
Damian

How do you "dodge" or "burn" light using Photoshop Element 11?

How do you "burn" or "dodge" light using Photoshop Element 11?

Select the Burn Tool, choose your settings then click and drag over the area you want to affect.
From the Options you can choose from Sponge, Dodge & Burn.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Automator: How to create a PDF contact sheet?

Hi,
I'm trying to create a PDF from multiple images in automator. The PDF should contain:
First Page: A contact sheet with all images
Following pages: One page for each image
Any idea how to achieve this? I don't even get the contact sheet working – it always results in a blank PDF.
Kind regards
Jan

Thanks for your reply. Unfortunately the intructions in the link don't work (did it exactly like this -> result is an empty PDF). I learned now from other posts that this is a Mavericks specific issue, which seems to be unsolved.
Apart from this: Do you think my request is solvable at all? Because the output of the contact sheet module would be the contact sheet iteslf (if it worked). I can't use this to create the full sized PDF pages, right?

How to create and hide a drive using java?

I want to ask how to create a temporary drive/ or a drive by allocating some space of existing drives(eg allocating some space of C: Drive such as 5mb for storing files on the new drive that has been created) and then i want to hide that drive .So Please can anyone Explain me how to do that.

Iam saying to all of you iam not blaming to anyone even java. And my harddisk is not currepted or damage by using that. My harddisk is working properly. But i don't know why all of you think that i am blamming to someone but iam asking some question which need to be answered.
I am clearing all of you i am a student and iam creating an project in java for that i need this. I also want to add File/Folder lock on that project. This technique i have seen in folder lock 6 software that they use hidden drive to store files. Thats why iam asking that how to apply this technique using java.
And plz plz read this carefully and answer me to solve my problem.

How can I print multiple (4) pictures to a sheet using photoshop Elements 4.0?

I have had to reload the software for Photoshop Elements 4.0 onto my new computer and I'm having trouble figuring out how to print multiple pictures to a sheet.

Launch the software,select the images you want to print and then go to File->Print.The print dialog box will open up.Choose the print size from the dropdown and then print the images.

Lack of print options when using photoshop elements 10 i.e. paper type

When printing from Photoshop Elements 10 on my MacBook Pro (File Print) there is no where to select paper type or print quality or there doesn't appear to be unlike when selecting print from iphoto. What have I missed? as there must be a way!

From the Print dialogue box click on the Show Details box at the bottom.

How to create high dynamic range image in Photoshop Elements 2.0?

I wonder if it is possible to Photoshop Elements 2.0. Any advice would be greatly appreciated.

If you are talking about the idea of merging exposures IN ELEMENTS 2 and you are shooting RAW, you can do what Barbara suggests: Open the file once with favorable settings for the bright parts of the image and a second time for the shadows and merge. In Elements 2, the images will not open in 16-bit, and will be converted immediately to 8-bit. You will find that registration is right on, but there will be issues with the process if you want to retain higher bit counts (which to me is really the only way to have higher dynamic range in reality). I don't know where these started to be called 'high-dynamic range', and I think it is really a bit of a misnomer--especially in 8-bit. Even Elements 5 will not support 16-bit images with layers, so the opportunity to get true accentuation of dynamic range is...limited.

How to create and write a BLOB using ImmediateAccess

Hi there,
I'd like to write a BLOB using ScrollableRowSetAccess an ImmediateAccess and thereby want to avoid the use of any SQL-statements.
The problem is that I can't write to an empty BLOB, so that I have to create a dummy-Blob using BLOBDomain and overwrite it afterwards (see code below).
It should be possible to avoid the creation of a dummy-BLOB but I don't know how. Could you please send me a corrected version of my code?
Thanks in advance
write File with filename to the column with index col /(or the column with name colname, if specified) of the table that is specified by ResultSetInfo rsi
public static void writeFileToBlob(int col, String colname, ResultSetInfo rsi, String filename, SessionInfo _sessionInfo)
FileInputStream fin;
Object obj;
ScrollableRowsetAccess srsa= _rsi.getRowsetAccess();
ImmediateAccess ia;
byte []mybytes;
BlobDomain
BLOB blob;
OutputStream out;
byte []myBuffer;
int bytesRead=0;
try{
//open file
fin = new FileInputStream(_filename);
//lock Row
srsa.lockRow();
if (_colname==null)
ia = (ImmediateAccess)srsa.getColumnItem(_col);
else
ia = (ImmediateAccess)srsa.getColumnItem(_colname);
obj= ia.getValueAsObject();
//insert a dummy-BLOB of size 1-byte
mybytes= new byte[1];
blobDom= new BlobDomain();
blobDom.setBytes(mybytes); //ein Byte in den BLOB schreiben
ia.setValue(blobDom); //Wert in Zeile einf|gen
//commit Data
_sessionInfo.getApplicationModule().getTransaction().commit();
//access previously created dummy-Blob
srsa.lockRow();
if (_colname==null)
ia = (ImmediateAccess)srsa.getColumnItem(_col);
else
ia = (ImmediateAccess)srsa.getColumnItem(_colname);
obj= ia.getValueAsObject();
//assign the BLOB
blob= (BLOB) obj;
//open BLOB for writing
out= blob.getBinaryOutputStream();
myBuffer= new byte[10*1024];
//read file and write the BLOB
while ((bytesRead= fin.read(myBuffer)) !=-1)
out.write(myBuffer, 0, bytesRead);
out.flush();
out.close();
fin.close();
ia.setValue(blob);
//commmit data
_sessionInfo.getApplicationModule().getTransaction().commit();
}catch(Exception e){System.out.println("writeblob:"+e);}
null

Here are the issues with your usage of BlobDomain:
1. Streaming support is not implemented in 3.2 version of BlobDomain. It'll be implemented in our next release.
2. Your casting of object returned from getColumnItem is illegal as the objects will be of type BlobDomain and not BLOB.
3. When you create an empty BlobDomain you're in-effect meaning to call the empty_blob() method on the sql-row to create a empty blob locator.
4. You need to use getBytes(), setBytes() to read data out/set data into a blob/clob domain object in JDev 3.2
5. Casting/using oracle.sql.BLOB may lead to non-portable code (you're binding to the jdbc objects which may not be available in all tiers of deployment).
Here's the pseudocode you could use for new blobs.
1. create a new instance of BlobDomain()
2. setBytes() with actual data read from a stream. (Yes this may not work with real large blobs but we've tested blobs ~2MB in size and for larger needs, we're implementing the streaming support scheduled for our next release).
3. set the domain object into an attribute.
4. post/commit your data.
null

How to create a ripple 3d effect using photoshop cs4

Hi,
Can any one help us or guide us to create 3d ripple design [link removed by host] for homepage.?
Thanks in advance
Cinas

Cinas,
Must it be in Photoshop? It might also be in Illustrator, to mention an obvious alternative.
An image hinting at what you want would help the helpers.

How to create and print contact sheet using photoshop elements 10?

Similar Messages

Maybe you are looking for