How to create arabic forms using adobe central forms

Any luck here? I have just a subset of your challenge, i.e., I want to get forms designed in Designer 8.2/Acrobat 9 to work in Reader 7.0.5
Thanks!

Similar Messages

How to enable frontend printing using Adobe Print Forms

Otto Gold at the forum "SAP Interactive Forms by Adobe" gave me the tip that Sandra Rossi in this forum might help me out. Here is the link to my original thread How to enable frontend printing using Adobe Print Forms
My question was:
Hi Experts!
Did anyone of you manage to enable frontend printing using Adobe Print Forms? In order to save administration effort we use frontend printing in our ERP system. We just changed some SMARTFORMS to the new Adobe Forms technology. Now we learned that direct frontend printing does not work with these forms.
Any help will be very much appreciated.
Kind Regards,
Gerald

I think you'll be disappointed by a rather negative answer but I'll try to explain everything I know (or think I know) the best I can
The simplest solution is to do a preview, and print from Adobe Reader! (as I could see on one project, users have to display one more dialog than usually to print) It's the best workaround according to me.
How Adobe form printing works:
When you print an Adobe form from SAP, a printer language (PCL, PS, ZPL, PDF) is retrieved from TSP0B table according to the device type, ADS (Adobe Document Services, installed in the SAP java stack) is then contacted to generate the form: a file corresponding to the printer language is generated and sent back to SAP (there are also 2 other little files but it's of none interest here). SAP stores it as a file (named SPOOL...) in the global directory (DIR_GLOBAL when you use AL11 transaction).
When you ask SAP to print it, it sends the file as is to the printer.
Note: when you ask SAP to display the spool, SAP sends a request to ADS which will send back a PDF (binary stream which is not stored on disk, just displayed on frontend).
How frontend printing works:
If you want to print a normal spool via frontend, SAP doesn't know the language of the printer you will choose. SAP sends the spool in a format named SAPWIN to a frontend program named SAPLPD, it converts the SAPWIN format into GDI, a Windows format that is understood by all printer drivers, and it is sent to the printer driver (you have selected) which converts the GDI format into the printer language.
Any workaround?
First possibility would be that ADS converts the PDF into SAPWIN format (by creating an Adobe .XDC file at the ADS side). SAP says it's not possible in Note 685571 - Printing PDF-based forms. As I understand, SAPWIN is a very simple language compared to PCL for example, so it is very difficult to convert a PDF to SAPWIN without losing much information. There's a SAP note about the SAPWIN language if you want to check.
Second possibility is to print directly the PDF through Adobe Reader: you get the PDF from ADS, download it to the frontend (easy), and execute directly Adobe Reader print function. Unfortunately, I don't know if it's possible. Moreover, we should enhance the standard SAP print dialog...
Third possibility is the one I recommended at the beginning of this post

How to create Crossword Puzzle Using adobe captivate

Hi,
how to create Crossword Puzzle Using adobe captivate
Thanks
Raja

Hi Darrell!
I've develeppoed a scrubber starting from the modification JackPister made to your code:
http://forums.adobe.com/message/4802851#4802851
I would like that scrubber can move in a circular path and it actually moves, but doesn't scrub... :-(
Any idea!
Many thanks in advance for your support!
Davide

How to create a scrollbar using adobe edge animiate

hello again,
i am having trouble creating a custom scrollbar with scrolling content using adobe edge animiate. i first tough that adobe edge animiate replace flash catalyst but with flash catalyst, i can easily create scrollbar but i am having a hard drive.
i know that i can use the overflow but i want to create a custom scrollbar with custom color, just like when using flash catalyst.
please help.

Hi Darrell!
I've develeppoed a scrubber starting from the modification JackPister made to your code:
http://forums.adobe.com/message/4802851#4802851
I would like that scrubber can move in a circular path and it actually moves, but doesn't scrub... :-(
Any idea!
Many thanks in advance for your support!
Davide

How to create interactive links, using Adobe InDesign.

After you create a book in InDesign and export as PDF, the links do not work, nothing happens. They are linked to each document individually.
I need to work within the generated PDF.
What to do?
thank you
<moved to the indesign forum by mod>

What version of InDesign? What operating system? What kind of links did you make? What tool did you use? Did you export to PDF (Interactive)?

How to create chess game using Adobe flash CS3

I want to develop a web application that when a user is login the game will automatically search for oppents onlinethat are accessing the same website. I want to design a chess game that does not contain any AI programming. What I want is that a simple chess setup that online user can only play.

use google to search for tutorials. that's a very complex undetaking so unless you feel you have advanced programming skills, you would be better served starting with a simpler game like tic-tac-toe.

I've created a PDF form using Adobe acrobat. I created the forms from a PDF that I made using pages

I've created a PDF form using Adobe acrobat. I created the forms from a PDF that I made using pages and word on Mac running Mountain lion. How do I allow the user of the form to insert JPEG files when filling out the form and how do I allow the user to add more fields or groups of fields as needed.

The type of form yo're describing is possible if you create it in LiveCycle Designer. It may also be possible in Acrobat, but there are certain restrictions. The type of form is known as a dynamic XFA form. LiveCycle Designer is not available on the Mac, so you'd have to install the software on a Windows machine and learn how to create this type of form. The LiveCycle Designer forum here is a good resource for getting more help.
Reader 11 now supports creating new pages using templates with a form that you create in Acrobat (Acroform). This requires some JavaScript programming. It also adds support for using a button to display a page from a PDF, which can be an image or anything else a PDF can be. So the user would click a button, be prompted to import a page from an existing PDF, and the button (or a different button) displays it as its icon. This would require the user to convert the image to PDF first, which is relatively easy these days (e.g., using Preview on the Mac, or Word on Mac/Windows). This too involves a bit of JavaScript programming, but it's very simple and straightforward.

How to create new page in adobe form.

how to create new page in adobe form.

Hi
First Go To Layout.
On Hicherchy Platte , rightclick on Subform and select option new body page.
This way you can create body page for the particular subform.
if you want to create master page , right click on page 1 and select New master page.
Hope this will helpful to you.
Rewards if useful.
With Regards
Nikunj Shah

Why can't I create Fillable PDF Forms using Adobe Acrobat X Pro and upload to Dreamweaver?

I can create fillable PDF Forms using Adobe Acrobat X Pro. I can email them to someone using Adobe Reader (free) and they can fill them, save and email to me. But when I upload the form to Dreamweaver CS5, the form is not fillable. And yes, I saved it as a Reader Extended PDF-Enable Additional Features.

I see no reason for this form to fail in Reader. Some questions for you.
1. On the system with Adobe Reader, what is the system and the version of Adobe Reader?
2. Are you viewing the PDF in a browser on the system with Reader, or in an Adobe Reader window?
3. If it's a browser
(a) what is the browser
(b) if you download the file instead, and open directly in Reader, what happens?

How to creating pdf documents using c# and Adobe SDK

I downloaded Adobe SDK and go through the samples given in sdk. But i couldn't find any sample code how to create PDF file using C# code.
Please, help me with this.
Thanks.

For desktop-based solutions, look at the Adobe Acrobat SDK which enables development around Acrobat itself. Or if you wish a stand-alone solution (for either desktop or server), we offer the Adobe PDFLibrary, which is the same technology used by all of Adobe's applications.
For the server, we have our LiveCycle products including LC Generator.
Leonard

How to create purchase order using VA01 for BAPI?

how to create purchase order using VA01 for BAPI?

Hi Arun,
Please check this link
Example Program for BAPI_PO_CREATE1
Re: BAPI_PO_CREATE1
Questions in BAPI_PO_CREATE1
Problem with BAPI_PO_CREATE1
*& Report BAPI_PO_CREATE *
REPORT bapi_po_create.
Input File Declaration
TYPES: BEGIN OF ty_input_file,
column1 TYPE char50,
column2 TYPE char50,
column3 TYPE char50,
column4 TYPE char50,
column5 TYPE char50,
column6 TYPE char50,
column7 TYPE char50,
column8 TYPE char50,
column9 TYPE char50,
column10 TYPE char50,
column11 TYPE char50,
column12 TYPE char50,
column13 TYPE char50,
column14 TYPE char50,
column15 TYPE char50,
column16 TYPE char50,
column17 TYPE char50,
column18 TYPE char50,
END OF ty_input_file.
DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
wa_input_file TYPE ty_input_file.
CONSTANTS: c_path TYPE char20 VALUE 'C:\',
c_mask TYPE char9 VALUE ',.,..',
c_mode TYPE char1 VALUE 'O',
c_filetype TYPE char10 VALUE 'ASC',
c_x TYPE char01 VALUE 'X'.
PARAMETERS : p_fname LIKE rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
Browse Presentation Server
PERFORM f4_presentation_file.
START-OF-SELECTION..
Read presentation server file
PERFORM f1003_upload_file.
IF NOT i_input_file[] IS INITIAL.
PERFORM split_data.
ENDIF.
*& Form f4_presentation_file
*& F4 Help for presentation server
FORM f4_presentation_file .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = c_path
mask = c_mask
mode = c_mode
title = text-001
IMPORTING
filename = p_fname
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_presentation_file
*& Form f1003_upload_file
*& Upload File
FORM f1003_upload_file .
DATA: lcl_filename TYPE string.
lcl_filename = p_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lcl_filename
filetype = c_filetype
has_field_separator = c_x
TABLES
data_tab = i_input_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
ENDFORM. " f1003_upload_file
*& Form split_data
Collect data for creating Purchase Order
FORM split_data .
DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
i_services TYPE STANDARD TABLE OF bapiesllc ,
i_srvacc TYPE STANDARD TABLE OF bapiesklc,
i_return TYPE STANDARD TABLE OF bapiret2,
wa_header TYPE bapimepoheader,
wa_headerx TYPE bapimepoheaderx,
wa_poitem TYPE bapimepoitem,
wa_poitemx TYPE bapimepoitemx,
wa_poitem_sch TYPE bapimeposchedule,
wa_poitem_schx TYPE bapimeposchedulx,
wa_acct_*** TYPE bapimepoaccount,
wa_acct_assx TYPE bapimepoaccountx,
wa_services TYPE bapiesllc,
wa_srvacc TYPE bapiesklc,
wa_return TYPE bapiret2,
ws_po TYPE bapimepoheader-po_number.
break gbpra8.
wa_services-pckg_no = 10.
wa_services-line_no = 1.
wa_services-outl_no = '0'.
wa_services-outl_ind = c_x.
wa_services-subpckg_no = 20.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 10.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 01.
wa_srvacc-serial_no = 01.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
LOOP AT i_input_file INTO wa_input_file.
IF wa_input_file-column2 EQ 'HD'.
wa_header-doc_type = wa_input_file-column3.
wa_header-creat_date = sy-datum.
wa_header-created_by = sy-uname.
wa_header-vendor = wa_input_file-column4.
PERFORM conversion_output USING wa_header-vendor
CHANGING wa_header-vendor.
wa_header-comp_code = 'DE03'.
wa_header-purch_org = 'DE03'.
wa_header-pur_group = 'DE1'.
wa_header-vper_start = wa_input_file-column9.
wa_header-vper_end = wa_input_file-column10.
wa_headerx-comp_code = c_x.
wa_headerx-doc_type = c_x.
wa_headerx-creat_date = c_x.
wa_headerx-created_by = c_x.
wa_headerx-vendor = c_x.
wa_headerx-purch_org = c_x.
wa_headerx-pur_group = c_x.
wa_headerx-vper_start = c_x.
wa_headerx-vper_end = c_x.
ENDIF.
IF wa_input_file-column2 EQ 'IT'.
wa_poitem-po_item = wa_input_file-column3.
wa_poitem-short_text = wa_input_file-column6.
wa_poitem-plant = wa_input_file-column8.
wa_poitem-quantity = '1'.
wa_poitem-tax_code = 'V0'.
wa_poitem-item_cat = 'D'.
wa_poitem-acctasscat = 'K'.
wa_poitem-matl_group = wa_input_file-column7.
wa_poitem-pckg_no = '10'.
APPEND wa_poitem TO i_poitem .
wa_poitemx-po_item = wa_input_file-column3.
wa_poitemx-po_itemx = c_x.
wa_poitemx-short_text = c_x.
wa_poitemx-plant = c_x.
wa_poitemx-quantity = c_x.
wa_poitemx-tax_code = c_x.
wa_poitemx-item_cat = c_x.
wa_poitemx-acctasscat = c_x.
wa_poitemx-matl_group = c_x.
wa_poitemx-pckg_no = c_x.
APPEND wa_poitemx TO i_poitemx.
wa_poitem_sch-po_item = wa_input_file-column3.
wa_poitem_sch-delivery_date = sy-datum.
APPEND wa_poitem_sch TO i_poitem_sch.
wa_poitem_schx-po_item = wa_input_file-column3.
wa_poitem_schx-po_itemx = c_x.
wa_poitem_schx-delivery_date = c_x.
APPEND wa_poitem_schx TO i_poitem_schx.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 01.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_***-po_item = 10.
wa_acct_***-serial_no = 02.
wa_acct_***-gl_account = '0006360100'.
wa_acct_***-co_area = '1000'.
wa_acct_***-costcenter = 'KC010000'.
APPEND wa_acct_*** TO i_acct_***.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 01.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_acct_assx-po_item = 10.
wa_acct_assx-serial_no = 02.
wa_acct_assx-po_itemx = c_x.
wa_acct_assx-serial_nox = c_x.
wa_acct_assx-gl_account = c_x.
wa_acct_assx-co_area = c_x.
wa_acct_assx-costcenter = c_x.
APPEND wa_acct_assx TO i_acct_assx.
wa_services-pckg_no = 20.
wa_services-line_no = 2.
wa_services-service = wa_input_file-column9.
wa_services-quantity = '100'.
wa_services-gr_price = '100'.
wa_services-userf1_txt = wa_input_file-column13.
APPEND wa_services TO i_services.
wa_srvacc-pckg_no = 20.
wa_srvacc-line_no = 1.
wa_srvacc-serno_line = 02.
wa_srvacc-serial_no = 02.
wa_srvacc-percentage = 100.
APPEND wa_srvacc TO i_srvacc.
ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_header
poheaderx = wa_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = ws_po
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = i_return
poitem = i_poitem
poitemx = i_poitemx
POADDRDELIVERY =
poschedule = i_poitem_sch
poschedulex = i_poitem_schx
poaccount = i_acct_***
POACCOUNTPROFITSEGMENT =
poaccountx = i_acct_assx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
poservices = i_services
posrvaccessvalues = i_srvacc
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
break gbpra8.
LOOP AT i_return INTO wa_return.
ENDLOOP.
ENDFORM. " split_data
*& Form conversion_output
Conversion exit input
FORM conversion_output USING p_ip
CHANGING p_op.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = p_ip
IMPORTING
output = p_op.
ENDFORM. " conversion_output
Best regards,
raam

I have developed a fillable form using Adobe Acrobat Pro. The form has several fields and some of the information is captured in a bar code. What programs must be used to open the form to properly fill the form out? Adobe Reader, Adobe Xi, Ibook, etc.. I

I have created a fillable form using Adobe Acrobat Pro that contains several data fields with some feeding data to a barcode in the document. I have a "button" set up to save and send the completed form one it is completed. Some of the user are having troubles filling out the form as they are using various programs to do such as iBook, Adobe Reader, etc.... Sometimes the information is not transferred to the barcode and sometimes the "submittal button" doesn't function properly.
Please provide a solution or give me a list of the programs that must be used to properly open and fill out the form.
Greatly appreciated.

Best option is to use Adobe Reader (or Acrobat, of course) on a desktop computer (ie, not on a mobile device). Any other configuration is likely to be problematic.

When printing form using Adobe Acrobat X, I get squares over my italic text

Hi,
I have created an Adobe Form using Adobe Acrobat XI Pro and just printed it to check whether this works and the following occured:
- When printing my 14 page document using adobe reader everything looked great
- When printing my 14 page document using adobe prof X (not XI !) the italic text had some (non filled, seethrough) squares throughout it. The squares are not constant (5-15 squares per sentence) and I cannot recognize a pattern. However, they appear each time I print the entire document.
- When printing only one page of the document (that has italic text on it) it prints fine with either the free adobe reader or adobe pro X.
Font is Verdana,Italic. Size is 8,27 pt. Data is sometimes embedded (I did not use this feature and have no idea what is means). I always use Windows. Right now windows 7 to be exact.
One more thing: as you can see above the file was created using adobe XI. However, my company uses adobe pro X and therefore the document had to be printable using adobe pro X.
Can someone please help me? I have put a lot of time in the design of this form and not being able to print it correctly is a real dealbreaker for using it which would mean my efforts were wasted.
I added an example to clearify:
Best,
Linda

This is all I can find in KB:
http://kb2.adobe.com/cps/877/cpsid_87775.html#main_Known_issues_on_Windows_
I downloaded MS hotfix and the issue still persists.
We have to identify if this is an adobe issue or a microsoft issue.

Howto developed an interactive form using Adobe LifeCycle Designer

how to developed an interactive form using Adobe LifeCycle Designer

Hi,
Take a look at the Howto page.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/was?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">examples</a>
There you will find a sub group about Interactive forms.
Hope it helps.
Kind regards,
Maarten.

Heavy performance issues using Adobe Interactive Form PDFs generated by SAP BPM

Dear experts,
we use Adobe Interactive Form PDFs (generated with LiveCycle Designer) as Human Tasks within SAP BPM processes. The PDFs are generated and transmitted correctly, but when they are opened at the receivers PC, Windows freezes for 2-3 minutes, then the PDF opens and can be filled out and sent back. The next PDFs can be opened much faster, but when the PC is restarted, we get the same problem again. We use Adobe Reader XI (11.0.2) on our clients; is their any know performance issue?
Please note, that we have this problem with EVERY Adobe Interactive Form PDF... I created a simple PDF containing just a field and the client PC still freezes. So it can't be in the form or the scripting. Normal static PDFs can be opend without any problems.
Best regards,
David

They haven't really announced it, because there is no product to announce. Rather the opposite.
There are no conversion tools, so far as I know.
XFA forms are a non-starter if you want portability.
AcroForms are a nightmare in themselves, because the functionality is limited in Adobe Reader and varies between absent and weird in other products. No idea about Blackberry support.
You will not find a simple recommendation. Rather, you need to use Acroforms and carefully test everything (EVERYTHING: no assumptions) on every platform you intend to support.
Yes, rather unsatisfactory, but until Adobe realise that the future is platform equivalence or irrelevance, this is where we are.

How to create arabic forms using adobe central forms

Similar Messages

Maybe you are looking for