How to create BP organization from WebIC instead of BP Person.
Hi,
I am using the component IUICMDC/SearchAll component/view for searching accounts and as well as creating new accounts of type BP Persons(Partner Category:Person1).Now I want to create New account BP Organization(Partner Category:Organization2) from same IUICMDC/SearchAll.I have enhanced the component and IUICMDC/Searchll,I have provided another button for create organization.Appreciate if anyone can tell me how to handle the Create Organization event handler for creating BP Organization.
Thanks and Regards,
Sama.
Hi Sama,
Thank you very much for your reply.
As you said to enhance IUICMDC, SearchAll component. I put a break point there and tested, it never
stops when i create a Person/Organization/Group. But when i put a breakpoint in
BP_HEAD_SEARCH/MainSearchResult it stopped. So that means how come Create Person/Organization/Group related to IUICMDC.
Can you please explain a bit more specifically.
Sama to be frank, I am new to this technical environment. I even searched steps to create an event handler but in vain.
Can you please guide me, how to proceed further. It would be a great help from you.
Thanks in Advance.
Rohan
Similar Messages
-
How to create xml file from Oracle and sending the same xml file to an url
How to create xml file from Oracle and sending the same xml file to an url
SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way. -
How to create Inbound Idoc from XML file-Need help urgently
Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora ReddyHi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee -
How to create an invoice from multiple sales doc.
Hi,
how to create an invoice from multiple sales doc.
thanx,
souravhello, friend.
assuming that your settings in VTFA and VTFL allow, you can create 1 invoice for many sales orders or deliveries by using VF04. choose all documents that apply and click "collective billing document".
you can also click on "simulation" if you want to test if the combination is possible and the system will give you a split analysis if this is not possible.
regards. -
How to create set hierarchies from FI SL.
Hi Experts,
How to create set hierarchies from FI SL. Could you please tell me
Step by step procedures or send to this mail id [email protected]
Thanks
Regards,
Sathis.JHi,
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
Hope This Helps.
Thanks,
Sankar M -
How to create database link from oracle to sql server
Please help with how to create database link from oracle to sql server
Best regards,
VishalPlease help with how to create database link from oracle to sql server
Best regards,
Vishal
Hi Vishal,
I found a lof of information regarding how to create a database link from Oracle to SQL Server, please see:
https://www.google.co.in/?gws_rd=cr&ei=vd3XUvGFO8TgkAXqlYCADg#q=how+to+create+database+link+from+oracle+to+sql+server
We discuss SQL Server related issue in this forum. If you have any more question regarding Oracle, please post it in Oracle communities forum for better support.
Regards,
Elvis Long
TechNet Community Support -
How to Create adf table from java bean
Hi,
How to Create adf table from java class (Not from ADF BC).
Thanks
Satya@vlsn -- you have to follow what shay said.
Do the following in Model layer ::
create a table property java class with your columns setters and getters like :
*public class gridProps {*
private int sno;
private String orderNum;
*public void setSno(int sno) {*
this.sno = sno;
*public int getSno() {*
return sno;
*public void setOrderNum(String orderNum) {*
this.orderNum = orderNum;
*public String getOrderNum() {*
return orderNum;
Create another table java class which will populate the values to your column values and return the collection :
*public class gridPopulate {*
private List<gridProps> gridValues ;
*public List<gridProps> setToGrid(ArrayList<ArrayList> valuesToSet) {*
*if (valuesToSet == null) {*
return gridValues;
gridValues = new ArrayList<gridProps>();
if(btnValue.equals("completeBtn"))
return gridValues;
for(ArrayList<String> tempArr:valuesToSet)
gridProps gp = new gridProps();
gp.setSno(Integer.valueOf(tempArr.get(0)));
gp.setOrderNum(tempArr.get(1));
return gridValues;
Right click gridPopulate class and create this as data control.This class will be seen in Data control list.Under this data control,Drag the grid property collection(created earlier) to your page.Then execute your binding(gridPopulate) according to your logic.
Thanks.(My jdev version 11.1.1.5.0) -
How to create session id from different string controls
how to create session id from different string controls
fais,
Please create the VI you are talking about and save some default data into all of the controls. Also on the front panel, place the session ID that should be generated by that data. Now, post your VI to a response so I can download it. I can then take this VI and help you create the functionality. (Please post what version of LabVIEW you are using.)
My guess it that you are going to need to use a good number of string concatenations as well as a few string indexes to get parts of strings out. As for the date, you can use a Property node with the Numeric Text.Text property to get the actual string displayed on the front panel for the date and parse out the parts that you want.
Randy Hoskin
Applications Engineer
National Instruments
h
ttp://www.ni.com/ask -
How to create chord charts from midi using logic pro x
How to create chord charts from midi using logic pro x
Depending on what you mean by Chord charts (Tabs?)
Use the Score.......
http://help.apple.com/logicpro/mac/10/#lgcpf755d649 -
How to create a organization structure?
Hi all,
How to create a organization structure for HR?
I want to use this in my workflow for Approval or Rejection at different levels.
Thanks and Regards,
ArpitaHi,
ppoc_old to create tcode
PPom_old change tcode
PPOs_old display tcode simple maintianence
The above mentioned codes are useful to create the ORG STRUCTURE IN ONE mentod that is simplemaintainence
there are so many way but at the initial stage follow these method
Try to know abt the OBJECTS
O org unit
C JOP
S Position
K cost Centre
P Person
and know abt there Relationshiops
u can check those things in tcode PP01 also
[http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/dfba3692dc635ce10000009b38f839/frameset.htm]
let me know if you have any queries.
Regards,
Raj -
How to create dll file from c code to use in compactrio 9004 RT controller
Hi.
I am using Compactrio 9004 Real time controller and i am new to this. I have a C code and i want to use this with the RT controller.I red that that can be done by creating a dll file and can be called in labview.Can any body expalin how to create a DLL from the c code and be used with this RT controlelr?
Regards,
Vishnuvishnu123 wrote:
Hi,
Earlier in this forum itself in cRIO 900x controllers will run Pharlap and run C/C++ code compiled into .dll files.Can you please tell how to transfer the created DLL to RT controller memory throght FTP?
Thanks and regards,
Vishnu
There is another KB article about this for Pharlap based controllers. And you are right the earlier CompactRIO controllers were Pharlap based. Basically for a deployed application to work, you need to put the DLL through FTP in "/ni-rt/system". If you deploy it directly from the project everything will be loaded into memory through the project environment itself including directly dependable DLLs, (but of course won't survive a power cycle).
I hope you are aware that while Windows DLLs can work on Pharlap OS they by no means will do so always. The Pharlap OS has not a fully featured Windows API. Also you need to be careful which version of Visual C you are going to use depending on the Pharlap OS version, since the VC runtime DLLs already present on the controller will need to be the same as the ones your Visual C environment likes to link in. Recent Pharlap OS versions use the msvcr71.dll. It's very possible that those runtime libraries can't just simply be copied from a normal Windows installation but might have been recompiled by NI specifically for their controller targets.
So to avoid problems it's a good idea to make sure your DLL uses the same runtime library DLL or make your DLL to include the static MS runtime.
Rolf Kalbermatter
Message Edited by rolfk on 02-05-2008 09:51 AM
Message Edited by rolfk on 02-05-2008 09:53 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
How to create Default Schema from within the application
Hi friends
I am creating users using the following within my application using this syntax
BEGIN
APEX_UTIL.CREATE_USER
(:P124_USER_ID, :P124_USER_NAME,:P124_USER_FIRST_NAME,:P124_USER_LAST_NAME,' ',:P124_USER_EMAIL_ID,'xxxx');
END;
The default workspace for the user is set as blanks. I would like to set it to be the default workspace as per the current logged in user.
Can you help me with the syntax for this
thank you in advance
LaxmiLaxmi,
The subject of the post is "How to create Default Schema from within the application".
But your question asks how to set the "default workspace" for a newly created user.
Those are different questions and not the ones I think you need answered.
Let me answer this question "How can you set the default schema for an account when creating the account and set it to the same value used for the default schema attribute of the administrator account used to authenticate to the currently running application?".
In the apex_util.create_user call use named parameter notation and fetch the information about the currently logged-in user first, e.g.,declare
l_workspace varchar2(256);
l_user_name varchar2(256);
l_first_name varchar2(256);
l_last_name varchar2(256);
l_web_password varchar2(256);
l_email_address varchar2(256);
l_start_date varchar2(256);
l_end_date varchar2(256);
l_employee_id varchar2(256);
l_allow_access_to_schemas varchar2(256);
l_person_type varchar2(256);
l_default_schema varchar2(256);
l_groups varchar2(256);
l_developer_role varchar2(256);
l_description varchar2(256);
begin
apex_util.fetch_user (
p_user_id => apex_util.get_current_user_id,
p_workspace => l_workspace,
p_user_name => l_user_name,
p_first_name => l_first_name,
p_last_name => l_last_name,
p_web_password => l_web_password,
p_email_address => l_email_address,
p_start_date => l_start_date,
p_end_date => l_end_date,
p_employee_id => l_employee_id,
p_allow_access_to_schemas => l_allow_access_to_schemas,
p_person_type => l_person_type,
p_default_schema => l_default_schema,
p_groups => l_groups,
p_developer_role => l_developer_role,
p_description => l_description);
apex_util.create_user(
p_user_id => :P124_USER_ID,
p_user_name => :P124_USER_NAME,
p_first_name => :P124_USER_FIRST_NAME,
p_last_name => :P124_USER_LAST_NAME,
p_email_address => :P124_USER_EMAIL_ID,
p_web_password => 'xxxx',
p_default_schema => l_default_schema);
end;Scott -
How to create a business partner whose BP category is person in crm portal?
How to create a business partner whose BP category is person in crm portal.When I use Partner and account management>Partner function in portal,I create a new partner,the partner category is default organization,can not change.
But I what to create a partner with the partner category person,how can I do it?
Is there any other special function to ceate a BP in portal matching the function with T code Bup1(create BP)in sap gui?
By the way,I have the whole privileges in portal and crm.
thanksHello,
Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
p.s. If you don't see combobox mentioned above, it could be security issue.
Kirill -
How do I download pictures from my computer to another persons IPAD
How do I download pictures from my computer to another persons IPAD?
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Cheers, Tom -
How to create value objects from xml
I am receiving xml back from my web service ( e4x ). I am
trying to figure out how to create a value object without having to
manually fetch each value in the value objects constructor. I am
using introspecton in my Java web service to do this. Is there such
a thing in Action Script?
Anyone done this before that can share some code???? Any help
would be very much appreciated.That's twice now I've heard that. lol.
I am using Cairngorm and I suppose out of ignorance perhaps,
I am using VO's. So my web service would return an Object Proxy and
I have some code that could create objects dynamically from the
results. The objects had to be simple of course and now they are
becoming more complex thus the need to change to e4x instead of
objects.
So now I am trying to convert the xml result into the desired
VO to be used throughout the rest of the application. I'm not sure
how to use Cairngorm without the VO's they are tied to everything.
Are you familiar with the architecture? Your thoughts?
Maybe you are looking for
-
How do I get my music off my iPod Touch?
I had a virus and had to delete all the data on my computer. I am now setting iTunes up again and I tried to get my songs off my iPod touch. It transfered only a small portion of my music, only the songs I had purchased in the past few months or so.
-
Problem with a Bex Query Report with Web Intelligence
Hello! I have a Bex query (with query Bex version 7.0) I'm connecting with Web Intelligence (4.0) but one of the attributes instead of displaying the description shows only the key, and it is strange because other cubes if given by the conversion. I
-
Validation(in the planning function) is failing to read fiscal year
Gurus, We created a fox formula in the planning function for validating budget data so that users do not profile above the allowed budget. We declared variables correctly as follows: **Declare variables* **++++++++++++++++++++++* *DATA CURRBUD TYPE F
-
Worng data in GR created by service entry
We seem to have a pretty big problem. We have GR's that were created after a service entry that don't match the data in the service entry. The service entry will have one cost center the GR shows another. The service entry shows charged to a cost cen
-
Get iPhone installed apps list
Hi, I need a way to get the list of all the Apps installed on the device. Can you help me? Thank you all Brandon