How to create chordsymbols in a SMF to perform with a Tyros (XF) Yamaha

Hello.
I try to create Standard Midi Files in Logic Pro 7 to perform it with a Yamaha Tyros 1 Keyboard. For my performing I like to have a "classical realtime leadsheet" on the display - chordsymbols, lyrics and the leadvocal line. I got a problem with the chord symbols. Tyros can not recieve the Logic created chordevents and otherwise Logic can not recieve the chordevents of a midifile that works on the Tyrosdisplay. If I load in and store a XF working midifile in logic the chordinformations in the Tyrosdisplay get lost. I´ve searched for the chordevents (in a XF file - I guess metaevents) in the LogP7 eventeditor but I couldn´t find.
Then I´ve tried the Yamaha XF-tool software (on Windows PC), also the same happened. I can create chordsymbols in XF-tool, it works on Tyrosdisplay, if I load the SMfile in logic and save, the chordsymbols are lost.
Is there any way to realize it to create SMF like I need with Logic ?
I hope that anybody can help me to find a solution for this problem, because I like to use Logic and Tyros
Rolojolo

"pandeya" <[email protected]> wrote in
message
news:f66jl8$72b$[email protected]..
> like we can link email links and hyperlinks (with other
files) how do i
> make
> link with another website like
> in my home page i say www.indiatoday.com and i want that
when one clicks
> on
> www.indiatoday.com this site opens
> how do i create a link using dreamweaver without having
to code manually.
Select the text www.indiatoday.com. In the Property
Inspector, in the Link
field, type the full URL -
http://www.indiatoday.com.
Click OK.
You might want to use the Help documentation for really basic
questions like
this..
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Similar Messages

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create users and groups using WLST Offline with Weblogic 8.1.4

How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?

Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo

How to create a Macromedia's Flash Java Player with JMF?

How to create a Macromedia's Flash Java Player with JMF? Can you give me an example? My email:[email protected] [email protected]

Yes, there is a way. Look up JTree in the API.-can you post some code.... i cant figure out on how to use JTree...
i'm still confused on where will i get the entire directories of my drives...
thanks

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How to create a workbook in BI 7.0 with more than 15 Sheets?

Hi Experts,
i would like to know how to create a workbook with more than 15 Sheets.
One Workbook should be based on one query and the other on differents queries.
How should be the authorization? If you have any documents please just send it to me.
Cheers
G

HI
Execute one report save it in the workbook, then you can goto the tools and click insert query, like that you can add how many queries you want. then right click on the reports goto properties there in the interface tab click the check button for refrsh all the queries. finally save it with the option save existing wrokbook(beacause you already save the first query in the workbook)
Regards,
chandra.

How to create a metric in BOXI R3 performance Management

Hi All,
Can any one tell me how to create a metric (goals and calendar) in BOXI R3. In BOXI R2 there is a separate module where we can create metrics, golas and calendar... Is there any separate module like that in BOXI R3 or not. When I logged into infoview then I'm unable to see the module which I had earlier mentioned. Is this any thing related to Admin access or not.
Thanks in advance,
Suresh Aluri.

Hello Suresh,
I am not sure exactly what you are refering to, but in case :
In Infoview of XI 3.x, you have to click on "Open->Dashboard and analytic" then "performance Manager->Metrics".
I recommend you to read the well-done "training" PDF "xi3-1_getting_started_performance_manager_en.pdf"
The PDF should be on SAP site.
Samuel.

How to create a 'Previous History' brush tool along with content aware

Truly did not know how to create a good title here.
When you use the 'Content Aware' tool and move subject 'A' to point B what happens is that A now sits on top of B which in turn means part of the image within B may be missing and you may still want it there where it was and where it should be. You could use the 'history brush' tool to brush away part of the new insert and erase what is there to reveveal what was there. How do you do the same thing to image A which now sits on B (to reveal what was there on A originally). What I mean is this. I moved a person from point A to point B. but parts of this person are missing (his ear, his knee, his shoe) so how do I get those parts back (in the new location)?
The history brush tool appears to be erasing by subtracting, what I would like to do in this case of course is not subtract but add or 're-add'.
Thank you

Hello,
here's a possible solution, before using content aware, take a snapshot of A and B, then use it as your history brush source whenever you need to 're-add':
please post back if you have any questions

How-To Create OVM 2.2.2 Single Pool with Non HA, Single Server

How to create OVM2.2.2 Server Pool with a Single, Non-HA configuration.
- Install OVM2.2.2 on target Server: [ovs222a, ip=192.168.0.207]
(Default install creates ocfs2 file system on /dev/sda3 on my machine, YMMV).
- Install OVMM2.2.0 or later on another server or VM
- Remove existing OCFS2 filesystem and repository from [ovs222a] server
- logon to [ovs222a] as root
# cd /opt/ovs-agent-latest/utils
# ./repos.py -l (shows uuid)
# ./repos.py -d [uuid]
- Recreate the ocfs2 file system
# mkfs.ocfs2 -N 8 -T datafiles /dev/sda3
- Create a new repository on the ocfs2 file system and make it root
# ./repos.py -n /dev/sda3
# ./repos.py -r /dev/sda3
# ./repos.py -l (should show new repository uuid with [R] designation)
- Edit cluster.conf, ensure only 1 node with ip addr: 192.168.0.207
# vi /etc/ocfs2/cluster.conf
- Edit /etc/hosts, ensure ovs222a ip addr = 192.168.0.207, not 127.0.0.1
(/etc/hosts should look like the following
127.0.0.1 localhost localhost.local.domain
192.168.0.207 ovs222a ovs222a.[your.actual.domain.name]
- Configure o2cb service, take the defaults which will start o2cb service on boot
# service o2cb configure
# service o2cb start
# service 02cb status
- Using OVMM2.2.0 GUI, create Server Pool
- Server Pool Name: [ovm2pool1]
- LEAVE SERVER POOL IP ADDRESS [BLANK], NOT NEEDED FOR SINGLE SERVER SERVER POOL
- LEAVE HIGH AVAILABILITY MODE ENABLE [UNCHECKED] (HA not available in single server cluster pool).
- Set [ovs222a], [192.168.0.207] as Server Pool: MASTER, UTILITY, VM SERVER with correct passwords.
- Test connection to [ovs222a]
- Create Pool

Hi
ThanQ For Reply Saurabh,
So Now I have to create one logon.jsp this jsp having username and password.
For Example http://sapmjd:50000/scw/logon.jsp
when i will pass the URLu2019s that time I am able to See logon Page. This .jsp is normal logon jsp looks like client logongape( logos, all available) By using this jsp how we will connect main URL i.e (irj/portal)
in logon.jsp I will pass UID and PWD that time I am logon into the Portal,
Could you tell me these Answes.
1. Is it possible to Connect main URL i.e (irj/portal) or customize par file having one jsp is there i.e jsp name umLogonPage.jsp. is it possible when I will pass the uid and pwd in logon.jsp this jsp will connect to the jsp umLogonPage.jsp.
2. If you says Answer YES How we will connect.
Regards
Vijay Kalluri

How to create the BC4J Package in JDev 10g (with OAF)?

Hi everbody.
in JDeveloper 10.1.3.1.0
How to create the BC4J Package for Client Object or Server Object?
In JDeveloper 9i Ext,
1. select the Project in Navigator
2. right-click and select "New Business Components Package... " from the context menu
3. "Business Component Package Wizard" page appears.
In JDeveloper 10, I cannot find "New Business Components Package..." from the context menu on the Project.

Do you have the OA extension installed ?
If not then please follow the thread Oracle JDev 10g with OAExt for Release 12 now on Metalink
for more information in this regard.
--Saroj

How to create a protected circuit across thirdparty SDH with ONS15454E

Hi gyus,
I have a setup with a dark fiber (STM-16) and a couple of STM-1s via a thirdpart SDH networ between two ONS15454E.
I know how to create a SNCP protected STM-1 circuit across the STM-16 and a STM-1 if they are directly connected, but what if one of the paths between the two SDH nodes are running via a thirdparty network and SDH overhead bytes are not transmitted via this circuit, hence I can't create a normal DCC connection across this STM-1?
Hope someone can direct me in a usefull direction.

I am not certain but I believe you need to create an Open-ended SNCP Circuit. The term "Open-ended" refers to the fact that one path of the SNCP's is not reachable via DCC connection.
You might review the following procedure:
NTP-D358 Create an Automatically Routed Open-Ended SNCP High-Order Circuit
<http://www.cisco.com/en/US/docs/optical/15000r8_5/15454/sdh/procedure/guide/e85pcci.html#wp689686>
I hope this helps.

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How to create recovery disk of OS X lion with Xcode 4

Dear All,
Can anyone tell me please how to create recovery disk for osx lion in case my OS crash . I want to create recovery disk please help me .
Regards
alfan

Dear ,
i am facing problem to upgrade my macbook pro 15 inch 10.6.3 to os x lion 10. 7 with recovery drive.
actually i m trying to install os x lion with the following method but could not install. i use 2 methods to install os please help me where im doing mistake.
1st method.
i make a recovery drive with recovery disk assistant on macbook air 13 inch which is shipped with lion 10.7 . and i connect my recovery drive with macbook pro 15 inch on which OS is snow leopard 10.6.3, for upgrade/install OS X lion on my macbook pro 15 inch by recovery drive.
when i hold down option key i can see my recovery drive . i can boot through my recovery drive but when i try to install os x lion the computer says
"you cant upgrade this version of mac os x "
2nd method
i made recovery drive on macbook pro 13 inch which is upgraded snow leopard to lion and then i try to upgrade my macbook pro 15 inch then the same problem i am facing
"you cant upgrade this version of mac os x "
Please help me
Regards
alfan

How to create a table from an existing table with new column

Hi !
Please help me.
I want to create a table from an existing table with data and add two new column to the new table.
What will be the syntax?

craete table new_table as select a.*, 'somevalue' new_col1, 'somevalue'
new_col2 from old_table a;Also there is a pitfall - newly created table will accept column type and precision from the select statement, so further you can be needed to modify columns
if you want to have VARCHAR2 instead of CHAR for example:
SQL> create table new_dept as select dept.*, 'New data' new_col from dept;
Table created.
SQL> desc new_dept
Name                                      Null?    Type
DEPTNO                                             NUMBER(2)
DNAME                                              VARCHAR2(14)
LOC                                                VARCHAR2(13)
NEW_COL                                            CHAR(8)
SQL> alter table new_dept modify (new_col varchar2(8));
Table altered.
SQL> desc new_dept
Name                                      Null?    Type
DEPTNO                                             NUMBER(2)
DNAME                                              VARCHAR2(14)
LOC                                                VARCHAR2(13)
NEW_COL                                            VARCHAR2(8)Rgds.
Didn't see michael's post - it reflects the fix for this problem using CAST.
Message was edited by:
dnikiforov

How to create Analysis from two different subject areas with diff models

Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robix

Hi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya

How to create chordsymbols in a SMF to perform with a Tyros (XF) Yamaha

Similar Messages

Maybe you are looking for