How to create 'custom defined color' in the palette (Oracle 6i Form Buidl)?

I'm new to Oracle 6i and urgently need to edit a colour scheme used on an existing set of Forms in Forms Builder.
I can see how to select colors from the default palette but cannot find a way to edit the 8 spaces kept in the palette for 'custom defined colors'.
Thanks in advance.

Have you tried with something as
IF DBMS_ERROR_CODE IN (-20001) then
message ('what_you_want');for example in ON_ERROR trigger?

Similar Messages

How to create custom FYI Notification in the iRecruitment Notification Approvals Transaction type

Dear All,
Does anyone know how to create a custom FYI Notification using the Notification Apporval Transaction type??
my requirement is when the Candidate complete filling his personal information and upload required document, a notification should be sent to the recruiter informing that all documents have been uploaded.
Can anyone tell me how to do that?
Thanks
Regards

Hi,
Please see this thread.
Want to send public message to all oracle apps users while instance up
Re: Want to send public message to all oracle apps users while instance up
Also, see these docs/links.
Managing Downtime in Restricted Mode from OAM [ID 364236.1]
R12 Enabling Applications Maintenance Mode and Preventing User Access [ID 557964.1]
Downtime and Apache Restricted Mode in Release 12
http://blogs.oracle.com/stevenChan/2008/03/downtime_and_apache_restricted_1.html
Thanks,
Hussein

How to create pre-defined folder in the document sharing iView in a room?

Hi everyone,
As title, I would like to know how to create some pre-defined folder(s) in the document sharing iView in a collaboration room?
Hope you someone can help me~~
Thanks and best regards,
Marcus

Try it like this:
Help with collaboration rooms templates
and here are soem of those docs:
http://media.sdn.sap.com/public/KMKeywords/Collaboration-Room.html
Regards,
Darin

How to create custom tye_lookup_code in po_headers_all table in Oracle Purchasing

I want to know how to create a custom document type/po type like STANDARD, BLANKET, etc in Oracle purchasing. I went and edit the look up codes for look up type 'PO TYPE' by navigating to set up --> purchasing --> Lookup Codes. But from UI, I'm not able to edit the page. So I wanted to know, does Oracle allows the user to create a custom PO type? If so, how do i create such one?
any pointers would be of great help!
thanks
sen.
Message was edited by: Sen2008

I want to know how to create a custom document type/po type like STANDARD, BLANKET, etc in Oracle purchasing. I went and edit the look up codes for look up type 'PO TYPE' by navigating to set up --> purchasing --> Lookup Codes. But from UI, I'm not able to edit the page. So I wanted to know, does Oracle allows the user to create a custom PO type? If so, how do i create such one?
any pointers would be of great help!
thanks
sen.
Message was edited by: Sen2008

How to create a static colors to the pie chart based on condition

Hi,
I want to create a pie chart like to get the colors based on the values in the label column as defined.
Is it possible to create such pie chart.

Tulasi 1243 wrote:
Hi,
I want to create a pie chart like to get the colors based on the values in the label column as defined.
Is it possible to create such pie chart.I don't think so because that will be too dynamic, only thing you need is populate a hidden item on the page with comma delimited list of colors. and use it with the combination of Custom Color scheme and specify the hidden item example. PX_COLORS
This is what apex help says :
Enter colors separated by comma, or an item in the application that holds a comma separated list of colors.Set of Custom Colors will be used to change chart colors automatically if you selected Custom option for the Color Scheme.
For example:
Comma separated list of colors:#005381,#0D813D,#BB8199
Item Name:P1_COLORS

How to create a Gradient color with the same gradient in vertical direction

To fill a rectangle, for example, let's illustrate as following
111111111
222222222
333333333
444444444
555555555
444444444
333333333
222222222
111111111
where 1, 2, 3, 4, 5 denotes a color value.
The following codes does not works.
g2.setPaint(new GradientPaint(0, 0, new Color(133, 136, 189, 234), w, h,
                                  new Color(133, 136, 189, 6), true));Thank you in advance.

Create two GradientPaint objects
        GradientPaint pnt1 = new GradientPaint(x,y,new Color(133, 136, 189, 234),x, y+rectHeight/2,new Color(133, 136, 189, 6));
        GradientPaint pnt2 = new GradientPaint(x,y+rectHeight/2,new Color(133, 136, 189, 6),x, y+rectHeight,new Color(133, 136, 189, 234));
        g2.setPaint(pnt1);
        g2.fill(new Rectangle(x, y, rectWidth, rectHeight/2));
        g2.setPaint(pnt2);
        g2.fill(new Rectangle(x, y+(rectHeight/2), rectWidth, rectHeight/2));

How to create custom audit rule for the following in jdeveloper ESDK

Hi,
I need customized audit rule which uses Oracle Jdeveloper 11.1.2.0 with ESDK extension. Can any one help me please.
The following is the audit rule I need.
I should not use any where "+" for concatenating more than one string in our project.
How can I achieve this.
Thanks in advance.
Lakshmi Narayanan.

Hi,
see
http://blogs.oracle.com/jdevextensions/entry/don_t_fear_the_audit
http://blogs.oracle.com/jdevextensions/entry/don_t_fear_the_audit1
Frank

How to create custom button by amending template in sc and change po screen

Hi,
Can anybody tell the steps that How to create custom button by amending the template in shopping cart or change purchase order screen.
Full points for the answer.
Edited by: shraman saha on Aug 17, 2008 6:44 PM

Hi,
I dont have any idea what you mean by Template for "Change Purchase Order" functionality. As far as i know there is a change button on the screen using which we go to the change mode and edit the PO.
About your other query: you do not require to download any HTML pages. To see the templates for PO go through the following path:
Transaction SE80 --> Internet options --> in the drop-down enter BBP_POC (for PO) --> Topic 99 --> HTML templates.
Then look for the following templates :
SAPLBBP_PO_UI_ITS 3000 --> for header basic data
SAPLBBP_PO_UI_ITS 4000 --> for item overview
SAPLBBP_PO_UI_ITS 4100 --> for item basic data
SAPLBBP_PO_UI_ITS 2200 --> for buttons.
Make appropriate changes to the screen and then publish it before using it. It is just like activating objects.
Hope this helps.
Thanks,
Pradeep

How can I create a new color in the calendar?

Good day,
I wanted the to create a new color in the default calendar from Apple, but I do not know how that goes.
Perhaps someone can explain to me how this works.
I would be very grateful for any advice.

If you mean you want to change a color of a calendar category or create a new one, you cannot do that, what is pre-loaded is what you get and cannot be edited.

How to create custom(or) user defined component in SAPTAO

Hi,
Please provide me some document or steps on how to create custom component in sap tao.
Thanks a lot in advance.
Regards,
Sudha

Hi,
If you want create any custom components, you should use SAP QTP to create it.
Here are the simple steps:
i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
iii) Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
Good luck.
Ram

What is Site Definition and is there any OOTB Site Definition ?How to Create Custom Site Defination?

Hi All,
What is Site Definition and is there any OOTB Site Definition ?
How to Create Custom Site Defination?
Thanks in advance!

Hello,
Please check following links for detailed explanation :
http://msdn.microsoft.com/en-us/library/aa978512(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ee231583.aspx
Regards, Shruti

I am planning to create custom defined DSO Object & Info cube

Hi ,
                 i am planning to create custom defined DSO Object & Info cube.what ratio i can calculate what is the keyfields & what are the data fields in DSO.How can i calculate.
                 2. how can i create suitable dimensions, suitable characterstics for dimensions.what ratio i can decide.
Thanks,
chandu.

Hi Diego Garu,
                           Thanks for your fast response.i
VBELN     VBAP     2LIS_11_VAITM                                              0DOC_NUMBER
POSNR     VBAP     2LIS_11_VAITM                                                0S_ORD_ITEM
KUNNR     VBAK     2LIS_11_VAHDR                                                 0SOLD_TO
VBELN     VBRP     2LIS_13_VDITM                                                    0BILL_NUM
FKDAT     VBRK     2LIS_13_VDHDR                                                 0BILL_DATE
INCO1     VBRK     2LIS_13_VDHDR(INCO1FieldNot Available in Data Source)     0INCOTERMS
ZTERM     VBRK     2LIS_13_VDHDR(Payment terms field Not Available in Data Source)                                                                                0UCPYTERMS
NETWR     VBRP     2LIS_13_VDITM                                                           0NETVAL_INV.
                                       here data is coming from the multible tables.that why i am planning to create custom defined data source based on view. here how can i calucate dso is suitable or cube is suitable.
suppose dso is suitable how can i decide which on is the data field and which one is the key field.
                                    how can i decide how many dimensions are needed here.and which chara are suitable for that dimensions.
Thanks ,
chandu.

How to create user defined metrics for SQL Server target?

The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?

http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

Attaching custom defined document to the BEx-report

Hai
I created a query in the Bex-Query Designer and then publish in the web through portals without using WebTemplates.
Now my client wants to attach a custom defined document(which requirment gathering document) to this query . How can i attach this custom define document to the query .
When i publish the report in the web then i have following tabs.
DataAnalysis
Graphical Display
Information
Information Broadcasting .
when i go to 'information' there i have "Query Documentation" tab . When i press this tab how can i get the my custom defined document
pls let me know
kumar

Hi ,,
Do this way....
Go RSA1 --> Documents -> meta data
then select object type ELEM and select object name <the query u want>
and add a text there or u can download from the file.
In BEX in query property check mark the document display then it will show a link in report and when u click that it will show the details..
did u check this as sent in ur previous thread....
Thanks,
Debasish

How to create Customer data TAB in PO -ME23N

Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMS

Hi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji

How to create 'custom defined color' in the palette (Oracle 6i Form Buidl)?

Similar Messages

Maybe you are looking for