How to create different Graphs in SharePoint 2013 without using Excel service?
Hi All,
I want to create different graphs in SharePoint without using Excel Service.
I do not want to create excel and then upload that to SharePoint.
Any one knows how to do that? Isthere any option to do that?
Thanks in Advance
Hi Darsh,
You can use
SharePoint chart webpart to display charts. Or you can use any jQuery charting library and feed data using JSOM or REST. Ex. high charts:
http://www.highcharts.com/products/highcharts
http://office.microsoft.com/en-us/sharepoint-server-help/sharepoint-lists-vi-exciting-ways-to-display-your-list-data-RZ102425636.aspx?section=3
Best Regards,
Brij K
Similar Messages
-
How to create recurring task in SharePoint 2013?
Hello,
Applies to: SharePoint 2013
Requirement: Is there a way to create recurring task in SharePoint 2013?
Regards
Tanzim Akhtar
Tanzim Akhtarthis might have the answer and work around. I will try it.
"What's changed in SharePoint Designer 2013"
http://msdn.microsoft.com/en-us/library/jj728659.aspx
Here is some of the explanation:
Description of the change. Some features of the SharePoint 2010 Workflow platform that are dependent on Windows Workflow Foundation 3.0 are deprecated in SharePoint 2013.
Reason for the change.SharePoint 2013 introduces a new SharePoint 2013 Workflow platform that is built upon Windows Workflow Foundation 4.0 and that is integrated with Workflow Manager 1.0.
Migration path. In SharePoint Designer 2013, you can still create a SharePoint 2010 Workflow and use all of the SharePoint 2010 Workflow features by choosing the SharePoint 2010 Workflow platform.
You can also integrate features from the SharePoint 2010 Workflow platform into the new SharePoint 2013 Workflow platform. To do this, create a SharePoint 2010 Workflow by choosing the SharePoint 2010 Workflow platform; create a SharePoint 2013 Workflow by
choosing the SharePoint 2013 Workflow platform; and then use the Start a list workflow and Start a site workflow actions in the SharePoint 2013 Workflow to call the SharePoint 2010 Workflow. -
How to create Site Directory in Sharepoint 2013
Hi All
I have a requirement to create Site Directory in SP-2013 , It should list all the sites available in Farm. Can you please Guide me how to do this. It will be a great help
Thanks in Adavnce
Manoj Gangwar
Manoj Gangwar | Sharepoint 2010 MCPD | Sharepoint 2010 MCTSHi Manoj,
You can check if the following article could work for your requirement with using the PowerShell script code to loop and list all sites' URLs,
Thanks
Daniel Yang
TechNet Community Support -
How to create a App domain in sharepoint 2013 without using DNS Manger
Can we create AppDomain for Sharepoint Hosted App without using DNS Manager ? In short I have to create App Domain for my local sharepoint environment.
You cannot create a APPdomain without DNS manager.
You can install DNS role on a machine and update your sharepoint server's DNS to consume from this DNS server. APPdomain cannot work without DNS -
CONNECT ORACLE11g database in sharepoint 2013 without using metaman or any third party tool
Hi!
I want to access ORACLE db and bring it as an external list in SharePoint 2013. How can it be achieved without using third party tools? So far i referred Creating
web service, .Net connectivity assembly or crafting the BCS xml model file manually are the techniques that can be employed to achieve. Can anyone share the code to create External content type and External list by adopting any one of the techniques.
Thanks in advance.Hi,
To connect SharePoint to your Oracle Database, you should use the BCS.
You will find here what is the structure of the XML File to create to access your Oracle DB.
http://msdn.microsoft.com/en-us/library/office/ff464424(v=office.14).aspx
Once you finished your BDCM, you will be able to import it with the following mehod :
http://www.manula.com/manuals/lightning-tools/bcs-meta-man-for-windows/1/en/topic/importing-the-bdc-model-into-sharepoint
The last step will be to create your external list from your BDCM.
http://msdn.microsoft.com/en-us/library/office/ee558778(v=office.14).aspx
Best Regards,
Frederic
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful. -
How to search a folder or a repository without using index service
Hi,
I want to get a count of all feedbacks (stored under /collaboration/feedback) created on a particular date. Since there are many sub folders, I am not able to use ICollection.
How can I read a folder or a repository without using IndexService.
Thanks in advance
VidyaHi SRIVIDHYA RAGHUNATH
I dont understand how can't use ICollection. What you want can be do it coding. The TREX and the Index search it works just to search on content.
I think what you have to do if Iterate on a IResource Object and the see if it is a file or a folder and keepp iterating, then when is a file, convert to an objects where you can get the feedback and count it.
Hope its help
Bye. -
How to create a workflow in SharePoint 2013 that modifies the Modified By field?
Hello,
I like to create a workflow that updates the "modified by" field in a list. Is this possible?
Thanks,
Paulthe built-in audit fields (Created, Created By, Modified, Modified By) are managed internally by SharePoint. Workflows can edit metadata, but those changes will be made using the user who started the workflow, or by the author (if the workflow is set to
impersonate the author).
You cannot change the audit data.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
How to create local store adapters in bulk without using ODSM in OVD
Hello,
Our requirement is to create 62 local store adapters in OVD
Hence, it can not be done using manual effort
I have tried to do this using below approach:
Create an ldif containing 62 groups
Update adapters.os_xml to have the 62 nodes of "standard" per adapter
restart OVD
import ldif file in data browser in ODSM
However, this approach is not working
I am not able to search these groups in my configured OAM and getting "No profile configured for such kind of group" error in identity console of OAM (10g)
Please help
Thanks,
PurvaYou cannot create a APPdomain without DNS manager.
You can install DNS role on a machine and update your sharepoint server's DNS to consume from this DNS server. APPdomain cannot work without DNS -
Hello All,
Greetings for the day.!
What is the main feature wise difference between SQL Server Analysis Service & Data Mart? Can we create BI Dashboard in SharePoint 2013 without creating SSAS & Measures?
Thanks,
msdn.microsoft.comHi jdoshi65,
This is a very long-to-answer question :)
A Data Mart is a subset of a Data Warehouse, specifically designed for a department for example, or to support certain reports. The Data Warehouse is where ALL the data available for analysis in your company is, is a super set from the Data Mart.
Then, we have SQL Server Analysis Services, which is a service which ships with SQL Server. It builds, ON TOP of the Data Warehouse or the Data Mart (or both) an OLAP solution in order to improve and enrich the reports, analytics and insights coming from
the data in the Data Warehouse / Data Mart.
That's the big picture, but:
- Is it necessary to have a Data Warehouse or a Data Mart to use SQL Server Analysis Services? NO
- Is it necessary to have SQL Server Analysis services to query and create reports from a Data Warehouse / Data Mart? NO
So, answering your question, there is no difference between SQL Service Analysis Services and a Data Mart because they are different things.
Then, yes, you can create a BI Dashboard in SharePoint 2013 without a SSAS cube behind. You can just use SQL Server Reporting Services or Performance Point Services to build dashboards in SharePoint 2013.
Regards. -
Creating multiple graphs dashboard in Crystal XI using a single View from MS SQL Server 2005
How to create multiple graphs dashboard in Crystal XI using a single View from MS SQL Server 2005?
I need to use Crystal XI and create a dashboard which shows some sales data and stuff, multiple graphs on a single screen.
My tech team says they can display one graph per page but not 4 graphs on the same page as it uses a common view from SQL Server 2005.
How to manage this? Can we call in multiple views / graphs in the same page? Say 4 graphs on the same page?
We use ASP or .NET for calling crystal reports into the App.
Regards,
Akshay.
INDIAHave you tried creating multiple sections, putting each graph in a separate section and then underlaying the sections so they appear next to each other?
-
Is it possible to publish reports to SharePoint if SQL Server 2012 reporting service is on native mode?
How to do it?
I have SharePoint 2013 and SQL Server 2012. I have created cube and reports with its data tools. This is single server environment.
This is what I have done:
A) I can successfully see from SQL Server installation tool that "Reporting Service-SharePoint" and "Reporting Services Add-in for SharePoint Products" are checked.
B) I don't see Reporting Services under the Manage Service Application of the SharePoint Central Admin.
c) When I choose report from reporting service project and I click deploy, it asks Reporting Services Login, but it does not accept admin logins. Server path should be valid.
I got idea from following instruction that I should register and start the Reporting Services SharePoint service
http://msdn.microsoft.com/en-us/library/jj219068.aspx
C) I tried to run command Install-SPRSService, but it was not recognized cmdlet command.
D) I see from Reporting Service Configuration Manager that Reporting Server Mode is Native. Report Service Status is Started.
Kenny_IHi Kenny_I,
Since the release of SQL Server 2012, Reporting Services SharePoint Integrated mode has been changed from a Windows Service to be a SharePoint Shared Service. In this way, Reporting Services Configuration Manager no longer supports Reporting Services SharePoint
mode, and all the configurations of SharePoint mode is completed using SharePoint Central Administration.
In SSRS 2008 R2 or lower version, only one report server (either native mode or SharePoint integrated mode) can be active at one time in one SSRS instance. In SSRS 2012, the report server that runs in SharePoint integrated mode and the report server that
runs in Native mode work separately at the same time in one SSRS 2012 instance. So, in this issue, you don’t need to care about the report server that runs in native mode when you work with the report server that runs in SharePoint mode.
First, please install SQL Server 2012 SP1 which introduces more BI features.
For the issue you encounter when running the commands to register the Reporting Services SharePoint Service, it may occur if you run the commands in the Windows Powershell instead of the SharePoint Management Shell. Please launch the SharePoint Management
Shell by clicking Start-> All Promgrams -> Microsoft SharePoint 2013 Products -> SharePoint 2013 Management Shell. Then, please continue the steps in the following document or blog to create a Reporting Services Service Application:
Install Reporting Services SharePoint Mode for SharePoint 2013
Installing and configuring SQL Reporting services on SharePoint 2013
After a SSRS Service Application is created properly, to deploy the project to the SharePoint integrated mode report server, please see the project property settings in the following document:
Project Property Pages Dialog Box
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Create SharePoint 2013 workflow using visual studio 2013
Dear Team,
How to create a workflow for template approval process using visual studio 2013.To achieve this do i need to install share point on my machine.Hi,
According to your post, my understanding is that you want to create a SharePoint 2013 workflow using Visual Studio 2013.
We need setting up and configuring Microsoft SharePoint Server 2013 and the Workflow Manager Client 1.0 server, see Start:
Set up and configure SharePoint 2013 Workflow Manager.
The following materials for your reference:
Develop SharePoint 2013 workflows using Visual Studio
http://msdn.microsoft.com/en-us/library/office/jj163199(v=office.15).aspx
How to: Create SharePoint 2013 Workflows using Visual Studio
http://msdn.microsoft.com/en-us/library/office/dn584771(v=office.15).aspx
Developing SharePoint 2013 workflows with Visual Studio demo
http://www.bing.com/videos/watch/video/developing-sharepoint-2013-workflows-with-visual-studio-demo/10t0er5gh
Best Regards
Dennis Guo
TechNet Community Support -
How to create different log files for each of web applications deployed in OC4J
Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi. -
How to create new scope for SharePoint calendar?
How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K -
ABAP MAPPING Querry - How to create Different Target NODE NAME as of Source
Hi,
In abap Mapping
<b>DATA READ FROM SOURCE XML NODE into <u>incode</u></b> ******
data: incode type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
<b>CREATE OUTPUT XML NODE WITH SAME NAME AS <u>'BUSINESS_DAY'</u></b> **
data: outcode type ref to if_ixml_node.
outcode = incode->get_item( index = 0 ).
data irc type i.
irc = msgtype->append_child( outcode ).
*<b>BUT TO CREATE OUTPUT XML NODE WITH <u>DIFFERENT NAME AS 'BUSS_DAY'</u></b>*
data: ws_val type string VALUE 'xyz'.
data: elementsender type ref to if_ixml_element.
elementsender = odocument->create_simple_element(
name = 'BUSS_DAY'
value = ws_val
parent = msgtype ).
<b>Please guide me how I can assign <u>incode</u> value to ws_val.
So that I can generate <u>OUTPUT XML NODE with different name as of SOURCE XML NODE</u></b>
i.e. How to create Different Target NODE NAME as of
Source with same Data
<Note>: I am using "How to... Use ABAP Mapping in XI 3.0 ver.1.00" and to create different NODE name as of source
is not given in it.
Thanks & Regards.Hi ABAPers,
Please Guide Me .....
<u>This is ABAP Mapping problem in XI.</u>
<b>How can I read data from incode into ws_val.</b>
data: <b>ws_val</b> type string
data: <b>incode</b> type ref to if_ixml_node_collection.
<b>incode</b> = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
Best Regards
Maybe you are looking for
-
Have a backing bean in request scope; need to access parameters sent to it
I have a request scope backing bean in my app, 'projectBean'. This has a property called 'id'. /** in request scope in faces-config.xml */ projectBean { id // set by the param from the previous page downloadAction() // activated
-
Warning on Unsaved Changes Functional Pattern
Overview One advantage of integrated applications is users can easily navigate just about anywhere based on current needs. However, with the added flexibility also comes the increased risk of unsaved data accidentally being lost when navigating away
-
How do I sync my new Iphone 4s to an older version of itunes
I just recently purchased the new iphone 4s and I still am operating the Mac OS X 10.4 and I can't figure out why my ringtones or movies are not syncing with my phone.
-
Will there be a iPod touch 5 or not?
I'm wondering if thats true or not can somebody tell me please.
-
Adobe LiveCycle ES Certification
Hi ALL Is there any certification for Adobe Livecycle ES product.Since I did not find a appropriate type I have posted it here ~Amol