How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

Similar Messages

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to create events for My Notifications Portlet

Hi,
The "My Notifications" portlet has no events. How can I create an event for this ?
The scenario is that when "My Notifications" portlet shows a message, this event should activates other portlet, say SMS portlet to send a SMS to user notified him/her that there was an message in his/her Notification page.
How can I archive this ?
Thanks in advance.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create events for a limited amount of months

Hi guys,
It happened to me more than once wanting to create an event that would repeat every month for 5 months ( example ) and having to create an individual event for every single month since there is now way to limited the amount of months a event can occur.
Is there a way to limit the amount of months of an event?
Thanks in advance for your help.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create Event for a BO

Hi Experts,
I am developing WF for tcode MD03, this transaction is used to create planned order.
I need to trigger a WF to send mail when ever a Planned order is created using MD03 tcode.
BUS2004 is the BO for Planned order, but this BO does not have any event linked to it. So my question is how to create a event to a BO.
Also, I used BTE to create a Z function module, this FM is getting triggered whenPlanned order is created using MD03 tcode. Is it possible to trigger a WF using this FM?, If yes, how?
Thanks in advance.
Regards
Balu

Hi All,
Thanks for your useful suggestion.
I placed a breakpoint in the Z FM to check whether the created planned is updated in Plaf table when this FM is triggered. But i found that Plaf table is not updated when the FM is getting triggered.
Do you still recommend me to go ahead and call the WF?
Regards
Balu

How to create event for BOR BUS2009 Object ?

How to create a new event for BOR BUS2009 Object ?

Hi,
Please create a subtype for BOR BUS2009, say Z_BUS2009 and include your custom characteristic entities like Events, Methods, Key fields etc and finally do delegation. After delegation, all your custom changes reflects in BOR BUS2009.
Regards,
Prasanth

How to create events for Z table ?

Hi Experts,
Can anybody tell me how to create an event for Z table. I have a Z table in that a Particular filed is there as BELNR.
This Table is being getting updated by various application & even with the User-Exits also. I want to sned an e-mail whenver this particular field is getting updated by any program.
how to do this? which event to be used for a particular field?
Pl. Help....
Regards,
Umesh

Umesh,
I hope below method will help solving the requirement:
-Changes made to the keydocuments are recorded in the change document
Header table i.e. CDHDR and Item table CDPOS, Additional change
pointers are written in the BDCP and BDCPS tables. (BDCP and BDCPS in your case)
-A standard program RBDMIDOC is sechuled to run on periodic basis to
evaluate the change pointers for a message type and starts the ALE
process for distributing the Masterdata to the appropriate destination.
-'Object' is collection of fields of different database tables. T.code
for creating an object is SCDO.
Also:
1. BD61 Active change pointers generally
- Check the checkbox "Change pointers activated -generally"
- Save it
2. BD50 Active change pointers for Message Type
- Message Type Active
Thanks,
Preyansh

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

Ical cannot create event in month view

iCal cannot create event in month view. Is this a bug?
I've tried double clicking in a day as I always did but nothing.

Ko be,
Application UI issues are in many cases, caused by a corrupt plist file.
Quit iCal, and try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. Since that Library is now hidden, you have to use the Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart and check iCal for functionality.
Also read Apple iCal 5 Office Software Review | Macworld for a description of Lion iCal.

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to Create Event polling table

hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj

1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

How to create event

HI,
I am trying to trigger a workflow whenever a contract is created against the Requisition.
I put the trace on(SWELS) and created a contract and got BOR object FREBUS2012 and Event CREATED.
But when i am using this BOR object and Event in the start event of workflow and creating a contract it is not triggering the workflow. But workflow is getting trigered whenever i am creating PO.
When i am tracing PO creation in SWELS i am getting same BOR object and same event.
Can anyone help me with that how can i create release strategy for Contract or how can i create "CREATE" event for BOR ZBUS2014 which is the copy of BUS2014(Contract) and does not have "CREATE" event.
Can you explain me also what is release strategy. I have no idea what is that for and how it is helpful in Workflow.
Any help would be appreciated.
Thanks in Advance.

Hi,
Can anyone help me with that how can i create release strategy for Contract or how can i create "CREATE" event for BOR ZBUS2014 which is the copy of BUS2014(Contract) and does not have "CREATE" event.
You don't see the created event in ZBUS2014 because you have not delegated it. Delegation means whenever created event of BUS2014 gets triggered your BO ZBUS2014 which has been delegated to BUS2014 will be called. After delegating the BO in workflow you can refer to BUS2014 wherever required instead of giving as ZBUS2014.
Steps for delegation
1. Go to SWO1 tcode
2. Enter the BO name as ZBUS2014. Click settings - delegate.
3. Click new entries. You will find three fields there.
Give Object type as BUS2014. Person responsible as your userid. Delegation type as ZBUS2014 and save this entry.
KR,
Bharath

How to create list of a View's column names and source

Using SQL 2005, 2008, and 2012
How to create list of a View's column names and source. For the following example would like to @Print something like the following. Does anyone already have some code to do this? I realize there are probably some gotchas, but the views that I am looking
at to use this follows the code snippet pattern below.
DBACCT.[Account Number]
dbo.ConvertDate(DBACDT). [Boarding Date]
DBXES.DBXES
CREATE VIEW [dbo].[v_ods_DBAL]
AS
SELECT DBACCT AS [Account Number], dbo.ConvertDate(DBACDT) AS [Boarding Date], DBXES
FROM dbo.ods_DBAL

The column information can be obtained from INFORMATION_SCHEMA.COLUMNS view using logic like below
SELECT c.COLUMN_NAME,c.DATA_TYPE
FROM INFORMATION_SCHEMA.COLUMNS c
WHERE EXISTS (SELECT 1
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = c.TABLE_NAME
AND TABLE_TYPE='VIEW')
http://technet.microsoft.com/en-us/library/ms188348.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Creating TCode for Maintanace View

Hi Experts,
I created a maintenance view for a ztable.
Ex. ZVIEW.
I dont want to give authorization of SM30 to User.
now i want to create a tcode for this.
in se93 i created a tcode by using parameters option.
But in this i have to give Tcode : SM30. but there is no authorization for sm30.
How to create tcode for this without authorization of sm30.

Hi
1) Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
2)The SAP naming convention reserves underlining in the second or third position for special objects. The object which you are processing does not belong to these special objects.
Mark the all helpful answers.
Thanks
Mohammed

How to create EVENTS for a View Cluster.

Similar Messages

Maybe you are looking for