How to create Matrix report in 9iAS portal
Could u pls explain with an example how to create an Matrix Report using Web Portal wizard bcos I need to create many complex reports with user parameters where I am not getting flexibility in WebDb to create such reports.
Thank you
Hi,
to make a matrix you will have to know the column values of your matrix. If this is known then you can use decode in your select statement to format the columns of your matrix. An example for selecting the salaries per department and per ename would be as follows:
select ename,
decode(deptno, 10, sal) d10,
decode(deptno, 20, sal) d20 ,
decode(deptno, 30, sal) d30 ,
decode(deptno, 40, sal) d40
from emp
group by ename, deptno,sal
Hope this helps,
kind regards,
Frank van der Borden
Oracle support services
Similar Messages
-
Creating a report in EP portal using Web Dynpro
Hi all,
Can anyone guide me how to create a Report in EP portal using Web Dynpro.
Regards,
R.V.EasterHi,
You should read the documentation ([Web Dynpro ABAP: Development in Detail|http://help.sap.com/saphelp_nw70/helpdata/en/03/0048413e466e24e10000000a155106/frameset.htm]) and study the tutorials : [Go and Create First Application with Web Dynpro ABAP|http://help.sap.com/saphelp_nw70/helpdata/en/e6/2c4b29dc87c6409d6469ec390e8f3d/frameset.htm] and [Creating a Simple Flight Info Application|http://help.sap.com/saphelp_nw70/helpdata/en/e6/2c4b29dc87c6409d6469ec390e8f3d/frameset.htm].
Regards,
Pierre -
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create matrix template help pls
hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
RajeshThis issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks -
Create a report in oracle portal based on a different database.
Hello,
I'm trying to create a report in oracle portal based on table in a different database than te one from portal.
I have allready succesfully added a new DAD in the enterprise manager, but how can I select that database in the portal environment?
ThierryHi,
Please check the below link
http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_voyager_userguide_en.pdf
I think you can get more information in Integration Kits - SAP or Business objects forum. -
How to create custom reports.
Hi ,
Could you please let us know how to create custom reports which are data based and not analytics. Which is the best method , is it to devlop reports in sites or integrate with OBIEE reports. could you please let us know the best practices for this approach.
Thank you,
Sashank P.Hi Jiri ,
Thanks a lot for your support. Below are my answers for the request:
1) what data you want to report on? Is it data from a database? file system? Web service outputs?
Ans : The Data would be mostly from Database only.
2) what is the overall purpose of your solution?
Ans: The overall purpose of this solution is to generate reports with sorting capability and should be able to export in different format documents.
3) what is your architecture?
Ans :
4) why Sites?
Ans: The customers login into our site and can be able to view the different reports and the present site is already a webcenter site. and the reporting capability is an enhancement .
Can you please provide the right approach here. We have an option of using ADF or even we can use Webcenter Portals. So which would be the best approach to go. And can you please guide us any approach or examples for integrating Webcenter Portals and Sites and even integrating ADf with Sites.
Thank you,
Sashank P. -
Running oracle form 6i or reports from 9iAS Portal
Where I can find the most accurat and deatil information how to
run form6i or reports from 9iAS Portal.
How to integrate Designer developed forms, reports ,sql scripts
web forms from designer 6i into
9iAS Portal.Do I have to go to OC4J.
or is there other solution?
Thanks For All Help I can get.I have tried the method illustrated by the Form 10g Demo. However, when I select the Import Java Classes from the pull down menu, I have got the following error:
PDE-UJI002 Unable to find the required Java Importer Classes.
My Oracle Form version is as follows:
Forms [32 Bit] Version 6.0.8.19.2 (Production)
Oracle8i Enterprise Edition Release 8.1.7.0.0 - 64bit Production
With the Partitioning option
JServer Release 8.1.7.0.0 - 64bit Production
Oracle Toolkit Version 6.0.8.19.1 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.17.0 Build #863 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.11.0 (Production)
Oracle Multimedia Version 6.0.8.18.1 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
Please help ! -
How to load Matrix report data into basic table data using ODI
Hi,
How to load Matrix report data into basic table data using oracle Data Integrator ?
Requirement Description:
Following is the matrix report data:
JOB DEPT10 DEPT20
ANALYST 6000
CLERK 1300 1900 Need to convert it into below format:
JOB Dept Salary
ANALYST DEPT10
ANALYST DEPT20 6000
CLERK DEPT10 1300
CLERK DEPT20 1900
Thanks for your help in advance. Let me know if any further explanation is required.Your list seems to be a little restrictive, you can do a lot more with ODI procedures.
If you create new procedure, and add a step. In the 'command on source' tab set you technology and schema as per your source database. Use the unpivot functionality as described in the link, please, rather than using 'SELECT *' use the appropriate column names and alias them for eg:
SELECT job as job,
deptsal as deptsal,
saldesc as saledesc
FROM pivoted_data
UNPIVOT (
deptsal --<-- unpivot_clause
FOR saldesc --<-- unpivot_for_clause
IN (d10_sal, d20_sal, d30_sal, d40_sal) --<-- unpivot_in_clause
Then in your 'command on target' tab set the technology and schema to your target db, then put your INSERT statement for eg:
INSERT INTO job_sales
(job,
deptsal,
saledesc
VALUES
:job,
:deptsal,
:saledesc
Therefore you are using bind variables from source to load data into target.
Obviously if the source and target table are in the same database, then you can have it all in one statement in the 'command on target' as
INSERT INTO job_sales
(job,
deptsal,
saledesc
SELECT job as job,
deptsal as deptsal,
saldesc as saledesc
FROM pivoted_data
UNPIVOT (
deptsal --<-- unpivot_clause
FOR saldesc --<-- unpivot_for_clause
IN (d10_sal, d20_sal, d30_sal, d40_sal) --<-- unpivot_in_clause
also set the log counter as 'Insert' on the tab where your INSERT statement is, so you know how many rows you insert into the table.
Hope this helps.
BUT remember that this feature only came out in Oracle 11g. -
How to create a report based on a DataSet programatically
I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
public NewReportWorker(string reportFileName)
: base(reportFileName)
public override void Process()
DatabaseController databaseController = ClientDoc.DatabaseController;
Table table = new Table();
string tabelName = "Table140";
table.Name = tabelName;
table.Alias = tabelName;
table.QualifiedName = tabelName;
table.Description = tabelName;
var fields = new Fields();
var dbField = new DBField();
var fieldName = "ID";
dbField.Description = fieldName;
dbField.HeadingText = fieldName;
dbField.Name = fieldName;
dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
fields.Add(dbField);
dbField = new DBField();
fieldName = "IDLEGITIMATIEBEWIJS";
dbField.Description = fieldName;
dbField.HeadingText = fieldName;
dbField.Name = fieldName;
dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
fields.Add(dbField);
// More code for more tables to add.
table.DataFields = fields;
//CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
// new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//info.Attributes.Add("Databse DLL", "xxx.dll");
//table.ConnectionInfo = info;
// Here an error occurs.
databaseController.AddTable(table, null);
ReportDoc.SetDataSource( [MyFilledDataSet] );
//object path = @"d:\logfiles\";
//ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
internal abstract class Worker
private ReportDocument _ReportDoc;
private ISCDReportClientDocument _ClientDoc;
private string _ReportFileName;
public Worker(string reportFileName)
_ReportFileName = reportFileName;
_ReportDoc = new ReportDocument();
// Load the report from file path passed by the designer.
_ReportDoc.Load(reportFileName);
// Create a RAS Document through In-Proc RAS through the RPTDoc.
_ClientDoc = _ReportDoc.ReportClientDocument;
public string ReportFileName
get
return _ReportFileName;
public ReportDocument ReportDoc
get
return _ReportDoc;
public ISCDReportClientDocument ClientDoc
get
return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+ * the following two string values can be modified to reflect your system+
+ ************************************************************************************************/+
+ string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb"; // path to xtreme.mdb file+
+ string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+ // Dataset+
+ OleDbConnection m_connection; // ado.net connection+
+ OleDbDataAdapter m_adapter; // ado.net adapter+
+ System.Data.DataSet m_dataset; // ado.net dataset+
+ // CR variables+
+ ReportClientDocument m_crReportDocument; // report client document+
+ Field m_crFieldCustomer;+
+ Field m_crFieldCountry;+
+ void CreateData()+
+ {+
+ // Create OLEDB connection+
+ m_connection = new OleDbConnection();+
+ m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+ // Create Data Adapter+
+ m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+ // create dataset and fill+
+ m_dataset = new System.Data.DataSet();+
+ m_adapter.Fill(m_dataset, "Customer");+
+ // create a schema file+
+ m_dataset.WriteXmlSchema(xsd_path);+
+ }+
+ // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+ // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+ void AddDataSourceUsingDataSet(+
+ ReportClientDocument rcDoc, // report client document+
+ System.Data.DataSet data) // dataset+
+ {+
+ // add a datasource+
+ DataSetConverter.AddDataSource(rcDoc, data);+
+ }+
+ // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+ // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+ // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+ // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+ // above.+
+ void AddDataSourceUsingSchemaFile(+
+ ReportClientDocument rcDoc, // report client document+
+ string schema_file_name, // xml schema file location+
+ string table_name, // table to be added+
+ System.Data.DataSet data) // dataset+
+ {+
+ PropertyBag crLogonInfo; // logon info+
+ PropertyBag crAttributes; // logon attributes+
+ ConnectionInfo crConnectionInfo; // connection info+
+ CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+ // database table+
+ // create logon property+
+ crLogonInfo = new PropertyBag();+
+ crLogonInfo["XML File Path"] = schema_file_name;+
+ // create logon attributes+
+ crAttributes = new PropertyBag();+
+ crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+ crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+ crAttributes["QE_ServerDescription"] = "NewDataSet";+
+ crAttributes["QE_SQLDB"] = true;+
+ crAttributes["QE_LogonProperties"] = crLogonInfo;+
+ // create connection info+
+ crConnectionInfo = new ConnectionInfo();+
+ crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+ crConnectionInfo.Attributes = crAttributes;+
+ // create a table+
+ crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+ crTable.ConnectionInfo = crConnectionInfo;+
+ crTable.Name = table_name;+
+ crTable.Alias = table_name;+
+ // add a table+
+ rcDoc.DatabaseController.AddTable(crTable, null);+
+ // pass dataset+
+ rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+ }+
+ void CreateReport()+
+ {+
+ int iField;+
+ // create ado.net dataset+
+ CreateData();+
+ // create report client document+
+ m_crReportDocument = new ReportClientDocument();+
+ m_crReportDocument.ReportAppServer = "127.0.0.1";+
+ // new report document+
+ m_crReportDocument.New();+
+ // add a datasource using a schema file+
+ // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+ // for more information, refer to comments on these methods.+
+ AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+ +
+ // get Customer Name and Country fields+
+ iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+ m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+ iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+ m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+ // add Customer Name and Country fields+
+ m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+ m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+ // view report+
+ crystalReportViewer1.ReportSource = m_crReportDocument;+
+ }+
+ public Form1()+
+ {+
+ //+
+ // Required for Windows Form Designer support+
+ //+
+ InitializeComponent();+
+ // Create Report+
+ CreateReport();+
+ //+
+ // TODO: Add any constructor code after InitializeComponent call+
+ //+
+ }+//========================================================================= -
How to create a report of users in ucm about their roles and permission
Hi All ,
I need to create a report and it should contain all the users in ucm as well as their roles and permissions. Basically the report would be for the admin who can see all the users in a single report and can know about the roles and access of each and every users.
How to create such report ?? I have tried from web layuot editor but the default report template i.e stdUserReport in user datasource does not contain more than three fields..Is there any method to get such kind of report???
Please suggest!!There was an example component to demonstrate this kind of function. Under Stellent in version 7.5
I do not know if they hand it out anymore but it is not on the standard samples page for Oracle. You may want to open a Support SR to ask for it. It should still be around in their servers if they can get permission to hand it out as a sample again.
Sample CustomReports component to demonstrate how to create customized reports
CustomReportsBundle.zip
Date: October 30, 2006
Sample Version: version=2006_10_20 (build 1)
Product and Version: Content Server
Sample Status: This is a Stellent Sample. Stellent Samples are free and include non-supported add-ons, utilities, tutorials or programming examples. It may require additional configuration or security auditing for maximum effect. It is not supported by Stellent without a consulting engagement. -
How to create a report in Form line Style and can display Image field?
Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnpHere you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers -
How to created a Report to calculate On-Hand inventory for pending sales
hi,
how to created a Report to calculate On-Hand inventory for pending sales orders.for this report what are the tables and fields we have to use give me sample report.
thank you
radhakrishna.Hi!
Tables:
VBAK - sales order header data
VBAP - sales order position data
VBUK - sales order status header data
VBUP - sales order status position data
VBELN field is the key between the tables.
Statuses in tables VBUK, VBUP: A-uncompleted, B-partially completed, C-fully completed
Regards
Tamá -
How to create a report based on selected item from Select list?
Hi,
I have created a tables_LOV based on:
select table_name d, table_name r from user_tab_cols
where column_name like '%_type%'
Then I created a page item ListOfTables, Display as select list and pointing to tables_LOV.
I run the page, and i can select the table i want from the drop down list.
How to create a report based on the selected item? (ex: select * from selected_table)
many thanks in advance
SalahHi Salah,
Allright, have a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
I think that simulates what you're trying to accomplish. I've set up the simplest method I could think of.
The report is based on an apex collection. If you are not familiar with that, you should study the documentation: APEX_COLLECTION
To recreate my example you should:
1) create an (interactive) report on your collection
SELECT *
FROM APEX_collections
WHERE collection_name = 'MY_COLLECTION'
2) create a page_item select list for the tables you want to display (in my case this is called "P38_TABLES" )
3) create a dynamic action that triggers on change of your select list page_item. The dynamic action must be a PL/SQL procedure perfoming the following code:
declare
l_query varchar2(4000);
begin
l_query := 'select * from '||:P38_TABLES;
if apex_collection.collection_exists
( p_collection_name => 'MY_COLLECTION' )
then
apex_collection.delete_collection
( p_collection_name => 'MY_COLLECTION' );
end if;
apex_collection.create_collection_from_query
( p_collection_name => 'MY_COLLECTION'
, p_query => l_query
end;
Make sure you add your page_item to the "Page Items to Submit" section.
4) Add an extra true action that does a refresh of the report region.
Here are two pictures describing the da:
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA1.png
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA2.png
Good luck and regards,
Vincent
http://vincentdeelen.blogspot.com -
How to create interactive report in SQ01
HAI EVERY ONE,
Can any one help me,
how to create interactive report using SQ01,SQ02,SQ03.
Plz explain me in details. I dont want simple report. I want to generate interactive report using SQ01. Is it possible how?
I will give u good points if it is useful.
Thanks and Regards,
V.VamsiHai,
When u create simple report using sq01 it display basiclist,Rankedlist,statistics,output sequence.
When u will use this options. That why i am asking. Actually basic list means simple report.
What about rankedlist,Statistics and outputsequence. Plz explain these things.
Thanks and Regards,
V.Vamsi -
How to create a report in EM from scratch level ?
Hi,
Can anybody help me on this ?
The report I want to create in EM is about where the user selects a target from a drop down and it shows the CPU utilization or memory Utilization for that respective target. Is it possible to create such kind of ? If Yes, How to create the report ?
Thanks in advance.Are you sure you want to create a report for this info?
As CPU and MEM utilization changes every second, what would be the use of a report?
I assume you are aware of the fact that CPU and MEM utilization is included for instance in the Host Homepage and can also be included in Group Pages and Dashboards.
Regards
Rob
For more information on OEM GC, like Tips and Tricks please see: http://oemgc.wordpress.com
Maybe you are looking for
-
After updating the latest on my MacBook OS X Version 10.6.8 I started experiencing several issues. iTunes will not open and continues to leave an error message on the screen. This is happening repeatedly for about 2 days. The error message looks like
-
yahoo is home page. yahoo music worked with firefox till I upgraded to firefox 4. Works with ie and just tried chrome. Screen comes up, video doesn't play, just grey in video screen. Norton security isn't blocking. Would rather use firefox, If firefo
-
RequestCenter emails not rendering correctly in Outlook 2007
RequestCenter emails not rendering correctly in Outlook 2007 I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007. When I look at the same email in Outlook 2003, the HTML
-
I had my computer plugged into a projector earlier and when I've done this before the screen stretches out while plugged into the projector. However it won't go back to it's normal size now after being unplugged and I tried turning it off. Please hel
-
Hello SAP colleagues, At work order when choosing items from contract or adding free text description to Services short text field "Unlimited Overfulfillment" field should always be ticked on. Do you know if this is controlled by customizing? I have