How to create Object related messages using cl_bsp_wd_message_service?

Hi Gurus,
Can any ony explain how to create the object related messages using add_message method of cl_bsp_wd_message_service?
Thanks,
Murali.

Hi Murali,
Check the below code .. hope it helps..
DATA lr_msg_service     TYPE REF TO cl_bsp_wd_message_service.
DATA lr_exception       TYPE REF TO cx_root.
DATA lr_rtti            TYPE REF TO cl_abap_objectdescr.
DATA lv_msg_type        TYPE        symsgty.
DATA lv_msg_id          TYPE        symsgid.
DATA lv_msg_number      TYPE        symsgno.
DATA lv_msg_v1          TYPE        symsgv.
DATA lv_msg_v2          TYPE        symsgv.
DATA lv_msg_v3          TYPE        symsgv.
DATA lv_msg_v4          TYPE        symsgv.
DATA lv_msg_level       TYPE        bsp_wd_message_level.
DATA lr_verification    TYPE REF TO if_bsp_wd_message_handler."#EC NEEDED
DATA lv_important_info TYPE        abap_bool.
DATA lv_exc_prog_name   TYPE        syrepid.
DATA lv_exc_incl_name   TYPE        syrepid.
DATA lv_exc_src_line    TYPE        i.
lr_exception = ir_exception.
drill down to first exception
WHILE lr_exception->previous IS BOUND.
    lr_exception = lr_exception->previous.
ENDWHILE.
lr_rtti ?= cl_abap_typedescr=>describe_by_object_ref( p_object_ref = lr_exception ).
lr_exception->get_source_position( IMPORTING program_name = lv_exc_prog_name
                                               include_name = lv_exc_incl_name
                                               source_line = lv_exc_src_line ).
prepare message
lr_msg_service = cl_bsp_wd_message_service=>get_instance( ).
lv_msg_type   = if_genil_message_container=>mt_warning.
lv_msg_id     = 'CRM_IC_APPL'.
lv_msg_number = '003'.
lv_msg_v1     = lr_rtti->get_relative_name( ).
lv_msg_v2     = ir_exception->get_text( ).
lv_msg_v3     = lv_exc_incl_name.
lv_msg_v4     = lv_exc_src_line.
lv_msg_level = '9'.
add message to error log
lr_msg_service->add_message(
      iv_msg_type       = lv_msg_type
      iv_msg_id         = lv_msg_id
      iv_msg_number     = lv_msg_number
      iv_msg_v1         = lv_msg_v1
      iv_msg_v2         = lv_msg_v2
      iv_msg_v3         = lv_msg_v3
      iv_msg_v4         = lv_msg_v4
      iv_msg_level      = lv_msg_level
      iv_verification   = lr_verification
      iv_important_info = lv_important_info ).
Regards,
Raghu

Similar Messages

How to create a relational view base on an xmltype table which included sev

Hi,
I am using oracle 11.2.0.1.0.
how to create a relational view base on an xmltype table which content several different .xml files?
Thanks.
for examle:
SQL> SELECT OBJECT_VALUE FROM document;
Edited by: Cow on Jan 6, 2011 7:57 PM

For example I already have these three xml files inserted into the document xmltype table.
These xml files have same schemas. I have attached below.
I want to show all elements/attribute values in xml files to relational view.
Is this possible to create one big relational view to show everything
or I have to create three separate relation views then use UNION to put together? Thanks a lot. Cow
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
<id root="5ca4e3cb-7298-4948-8cc2-58e71ad32694"/>
</component>
</document>
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
</component>
</document>
Edited by: Cow on Jan 4, 2011 9:51 AM

How to create new XML file using retreived XML content by using SAX API?

hi all,
* How to create new XML file using retreived XML content by using SAX ?
* I have tried my level best, but output is coming invalid format, my code is follows,
XMLFileParser.java class :-
import java.io.StringReader;
import java.io.StringWriter;
import javax.xml.transform.OutputKeys;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.xml.sax.Attributes;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.XMLFilterImpl;
public class PdfParser extends XMLFilterImpl {
 private TransformerHandler handler;
 Document meta_data;
 private StringWriter meta_data_text = new StringWriter();
 public void startDocument() throws SAXException {
 void startValidation() throws SAXException {
 StreamResult streamResult = new StreamResult(meta_data_text);
 SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
 try
 handler = factory.newTransformerHandler();
 Transformer transformer = handler.getTransformer();
 transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
 transformer.setOutputProperty(OutputKeys.INDENT, "yes");
 handler.setResult(streamResult);
 handler.startDocument();
 catch (TransformerConfigurationException tce)
 System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
 super.startDocument();
 public void startElement(String namespaceURI, String localName,
 String qualifiedName, Attributes atts) throws SAXException {
 handler.startElement(namespaceURI, localName, qualifiedName, atts);
 super.startElement(namespaceURI, localName, qualifiedName, atts);
 public void characters(char[] text, int start, int length)
 throws SAXException {
 handler.characters(text, start, length);
 super.characters(text, start, length);
 public void endElement(String namespaceURI, String localName,
 String qualifiedName) throws SAXException {
 super.endElement("", localName, qualifiedName);
 handler.endElement("", localName, qualifiedName);
 public void endDocument() throws SAXException {
 void endValidation() throws SAXException {
 handler.endDocument();
 try {
 TransformerFactory transfactory = TransformerFactory.newInstance();
 Transformer trans = transfactory.newTransformer();
 SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
 DOMResult dom_result = new DOMResult();
 trans.transform(sax_source, dom_result);
 meta_data = (Document) dom_result.getNode();
 System.out.println(meta_data_text);
 catch (TransformerConfigurationException tce) {
 System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
 catch (TransformerException te) {
 System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
} CreateXMLFile.java class :-
Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
* In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
is not an XML type text, it just an Normal text Why that ?
* Please help me what is the problem in my code?
Cheers,
JavaImran

Sax.startDocument();
Sax.startValidation();
Sax.startElement("", "pdf", "pdf", new AttributesImpl());
Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());
String xmp_str = new String(meta_data.getByteArray(),"UTF8");
char[] xmp_arr = xmp_str.toCharArray();
Sax.characters(xmp_arr, 0, xmp_arr.length);
</code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
<code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
Sax.endValidation();
Sax.endDocument();
* I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
* I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
Thanks,
JavaImran{code}

How to create a single report using 5 difftent reports

Hi Experts
how to create a single report using 5 repors in it.
Example
I have to create a Survey history report using
Reports like Surevy 1
                  Surevy 2
                  Surevy 3
                  Surevy 4
                  Surevy 5
Please suggest me.
Santosh

Use Analysis Process Designer (RSANWB) to feed each of the survey BEX reports to one DSO. Assuming each of the surveys has something in common to compare. Could also be used as a snapshot storage for the surveys in case history needs to be compared/archived.
Build the Direct update DSO with the survey objects. Add needed time characteristics and/or version control objects to the key.
Data sources will be the 5 surveys.
Add formula to hardcode version/time for history.
Data target is the direct update DSO.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/49/7e960481916448b20134d471d36a6b/frameset.htm
-SM

Yes, I want to create object-relational schema from DTD.

Thank you for reply~~
I want to create object-relational schema from DTD using object type or collections as mentioned.
In reply, it is impossible.
But, I read Oracle supports storing an XML document with object-relation. I executed storing sample, but I had to create schema manually.
Is it really impossible to create OR schema from DTD automatically?

Yes. You need to create your database schema before insert XML data to it.

How to create a table to use in webdynpro ABAP

Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
Ravi

Hi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful

How to create a unique key using two or more attributes?

how to create a unique key using two or more attributes ?

The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”.

How to create object at infoview

Hi all
i am using SAP BO 3.1
How to create object called SL NO this is not available at universe and second object "code" is coming from universe.
final output should be like this
SL NO
code
1
Non-Emergency ED Utilization
2
Office Visits
3
Inpatient Stays
thanks in advance!!
Ranjeet

Hi Ranjeet
Insert one column in that report. Write formula like this...
=LineNumber()-1
Regards,
G

[CLOSED]How to create a custom messages

Hi All,
I have a page and one save button .on press of save button, i want to show a custom message like "Applied changes are saved."
Can anybody please elaborate how to create a custom message and how to show it through Controller.
may i use
OAException message = new OAException("AK",
"FWK_TBX_T_EMP_DELETE_CONFIRM", tokens, INFORMATION, null);
-Thanks,
Avinash
Message was edited by:
user624747

When i used the code
OAException confirmMessage = new OAException("JTM","JTM_SAVE_SUCCESSFULL",null, OAException.CONFIRMATION,null);
throw confirmMessage ;
i am getting following error :
Error :
Application: JTM, Message Name: JTM_SAVE_SUCCESSFULL.
I have created the message "JTM_SAVE_SUCCESSFULL" through
Application Developer --> Application --> messages responsibility and given its type as error , application as "mobile application foundation" and then "ran the generate message" program.
After that i checked the fnd_new_message table . the message is there.

How to create objects to paint itselfs without specifiy the location

How to create objects to paint itselfs without specifiy the location using Java 2D

shot in the dark: pass in the Graphics2D context to the method ?

How to create a new plugin using Adobe InDesign CS5?

How to create our own plugin using Adobe InDesign CS5?is there any documents available for this?

Sure. (Didn't Google find anything?)
http://www.adobe.com/devnet/indesign/sdk.html
But you don't "use" InDesign to write plugins. You need a C++ compiler and a lot of programming knowledge and experience with C++. If this means nothing to you, don't look any further -- it's way too complicated to "go and get started" at random. Adobe's documentation is not intended for learners, starters, and people who shrink back at the thought of having to read multiple help documents that are each a couple of megabytes large.
Using the SDK is so complicated there's even a part of the forum dedicated to it, aptly (and obviously) called InDesign SDK. If you browse the messages in there, you can get an idea of the most common pitfalls and problems.
If the above scares you off, well, that was fully intentional (sorry, but it is). It's by far easier to write scripts. Scripts have several advantages over plugins:
1. They are platform independent (Javascripts are; AppleScript is just for Macs and Visual Basic is just for Windows). Plugins are exclusively platform dependent. To write the same plugin for both Windows and for Mac, you have to know all the pitfalls of changing code from one platform to another, and you need a complete working compiler and development system for both platforms.
2. They are version independent. Simple scripts work on a fairly great range of InDesign versions -- some of my own scripts date back to CS, and are totally or virtually unchanged. It's even possible to force "too old" scripts to work with newer versions.
3. Scripts can do most of the things a plugin can do. The main difference used to be that plugins allow you to write a fully integrated look-and-feel part of InDesign, but with the advance of ScriptUI and event handlers and menu customization, you come quite far. Only for highly specialized functions you still need a real plugin (custom item integration, custom spell and hyphenation modules, stuff like that).
4. The scripting community is very active -- it also has a forum of its own, called (well, obviously) InDesign Scripting -- and are a friendly lot, always ready to help. (Unless you whine about how to do every little thing. (That is, I can't stand that personally. Others may not mind.))
5. Scripting is easy. ... not really, but it is fairly easy, and compared to writing a custom plugin in C++, it's a breeze, a walk in the park, and a summer stroll all rolled into one.

How to create a crystal Report using C# and SQL Server

Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
but i got an error on the adding of server name and database portion.. thanks a lot in advance

Hello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

How to create custom report plugin using child region report metadata

Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?

Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                     P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                     P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
    VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
    VCOLCOUNT       NUMBER;
    VCOLNAMES       VARCHAR2(2000);
    VAJAXIDENTIFIER VARCHAR2(100);
    VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
    VJSCODE         VARCHAR2(32767);
BEGIN
    VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
                                                    P_MIN_COLUMNS    => 1,
                                                    P_MAX_COLUMNS    => 999,
                                                    P_COMPONENT_NAME => P_REGION.ID);
    VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
    FOR I IN 1 .. VCOLCOUNT LOOP
      VCOLNAMES := VCOLNAMES || '{name: "' ||
                   UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
    END LOOP;
    APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
    RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
    WHEN OTHERS THEN
      APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
      RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala

How to create objects in ABAP Webdynpro?

Hi,
I want to create the object for the class: CL_GUI_FRONTEND_SERVICES.
then i want to call file_save_dialog method.
how shoud i write the code, plz?

I have written this code:
v_guiobj TYPE REF TO cl_gui_frontend_services.
 ?????????????
v_guiobj->file_save_dialog( ...).
How to create object in the place of ?????????????.
Bcoz, when i run this i am getting:
Access via Null object reference not possible.

How to create Object related messages using cl_bsp_wd_message_service?

Similar Messages

Maybe you are looking for