How to create separate Transfer Orders for different items in a single D/O?

Hello gurus,
In my D/O there may are Item A and Item B. I would like to have separate transfer orders created.
1 T/O for Item A and another T/O for Item B. Currently, I get the message "L3131  No partial picking allowed for delivery documents". System does not allow.
I have checked D/O Doc Type LF and Item Cat TAN. I don't see any field which allows partial picking (unless I missed it?).
How / Where can I configure to allow such feature?

Hello,
I had exactly same problem, and I found no answer on the web.
A friend, Anderson Ranéa, Senior WM Consultant, helped me...
So... you need to set the flag PartialPick at: SPRO/LE/WM/Shipping/Interfaces/Shipping/Define Shipping Control/Shipping Control per Warehouse Number.
Regards.

Similar Messages

  • How to create automatic Transfer Order for posting change delivery mvt.321?

    Hi,
    We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
    Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
    Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
    Thank you,
    Regards,
    Madhavkrishnaa.

    Pls see the customizing.
    SPRO:  Logistic Excution>Warehouse management>interfaces-->Define Quality management

  • How to create a transfer order for stock lying in consignment?

    Hi All,
    I'm stuck creation of Transfer Order. The scenario is for Intercompany Stock Transfer.
    The delivering plant has the requested material as consignment stock only (in a bin in storage type HRC). When the delivering plant attempts to create TO for Outbound Delivery, the error says "System can not find storage bin". When I enter the source storage type and bin, the system says 'Storage type HRC doesn't allow negative stock figure".
    My question is, how to enable the system to search the consignment stock?
    Thanks,
    Rana

    Hi,
    Pl refer OSS note 13006 which says
    It is not possible to transfer vendor consignment stock from one plant to another plant (movement types 301 to 306 for special stock 'K').
    A stock transfer by means of a delivery is also not supported (movement types 641, 643, 647).
    Cause and prerequisites
    This program function is not supported.
    In order to implement this program function, it would be necessary to find a solution to the business-related aspect of the valuation problem:
    Since the consignment price of a material from a vendor can be different in the two plants involved, it would be possible to manipulate the consignment liabilities towards the vendor prior to consignment withdrawals by performing a transfer posting and thus transfering the consignment stock to a suitable plant.
    Solution
    You can post the stock transfer in two steps:
    1. Post the stock issue in the issuing plant using movement type 562 in combination with the special stock indicator 'K', for example.
    2. Post the stock receipt in the receiving plant using movement type 561
    in combination with the special stock indicator 'K', for example.
    Hope this is helpful.
    Regards,
    vijay

  • How to create collective Transfer order for a collective outbound delivery?

    Hello All
    I created a group of deliveries and I got two outbound documents, now I want to create a collective Transfer order it gives me an error “does not exist in T311” however the individual outbound delivery whiten the group could be picked
    Can any one help me to solve this
    Regards
    Jacopo Francois

    hi
    Transfer order will create based on delivery document .  U got two delivery document number.
    So goto LT03
    enter delivery document number
    execute save.
    again goto LT03
    enter another delivery document number execute, save it
    regards
    krishna

  • Create TO (transfer order) for different materials?

    Can we create one  TO for diffrent materials in LT09 transaction. Or is it like for a single material i can create a single TO ? In LT09 tcode Can i add materials o the item details tab after giving the stor unit no. dest and source bins?
    Thanks
    VV

    yes you can create if you refer same document (PO,Order).
    eg:if you do a GR for a PO with 3 line items(3 different materials).Then you can create a single TO for all the 3 different materials.But if you refer different PO for each line item,then it is not possible.
    regards
    venkadesh

  • How to create Auto  . transfer order

    Hi Guys
    How to Create Automatic transfer order after posting GR wrt PO
    What are the settings required for this?

    Hi,
    Please refer the below link
    http://help.sap.com/saphelp_45b/helpdata/EN/c6/f83db14afa11d182b90000e829fbfe/content.htm
    Regards,
    Deepak.

  • How to create multi garnishment order for the same garnishment document

    Hi,
    Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
    Thanks a lot in advance.

    hi,
    As far as I got it.
    You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
    For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
    Since like order you cannot maintain adjustment also directly.
    Regards,
    Amit
    Reward all helpful replies.

  • How do we do production orders for same item code in different sizes

    Hi,
    We have Items which we buy as a single sheet of material and our customers can ask for us to cut the complete sheet into different sizes before despatching it. i.e
    Item Code Sheet1: Sheet size 100mm x 100mm
    Customer asks for sheet to be cut into 10 off 10mm x 10mm sheets, which we presently put on the sales order as a line note
    We then generate a production order for this item and indicate on the production order printout the line note
    We've recently had a customer who has asked for Item 1 in two different sizes on the same sales order ie
    Order Line 1 Sheet1 Qty:1 Line note: cut into 10mm x 10mm sheets
    Order Line 2 Sheet1 Qty:1 Line note: cut into 50mm x 50mm sheets
    When generating the Production order SAP combines the items into
    Product No: Sheet1
    Planned Qty: 2
    Where as we want it to create 2 production orders 1 of each different sizes items.
    I know I can create BOMs for those two sizes, but customers can ask for the sheets to be cut to whatever size they want. Is the best method to create BOMs on the fly for each different sizing option or are there alternative methods that are easier to manage ?
    Thanks
    Carl

    Hi Carl Rutter,
    You have to creat 2 special production order for this item. when issue the component make sure you issue the stock as per the cosumption becaue one have 10mmx10mm and the another item have 50x50 in this case you issue component by square inch wise. for example 10*10 = 100 squre inch.
    50*50 = 2500 square inch so the cost will be approtionate. you can Use multiple uom method to obtain this, other wise you have covert into stock then you issue the component. If you want traxk size wise ,you can use batch option for Finishe goods.
    Regards
    Sridharan

  • How to create a sales order for Onetime customer with Tax code?

    Hi everyone,
    Can I use sd_salesdocument_create for a one-time customer? From the standard bapi, which field can I use for the Tax Code ?
    pOints will be given.

    I have the same problem... should I use a different function module on this? if yes, what is it?
    I need to create a sales order for one onetime customer with tax code... help me pls....

  • Customization for create 2 Work orders for different vendors against 1 PR

    Hi,
    What are the customization settings  to create 2 work orders for 2 different vendors against 1 PR with half-half quantity?

    thank you Mario.
    Actuly its infrastructure cmpany & user wants create Purchase order(service work order) for two different vendors with reference to single PR with alocating 60% quantity to 1st vendor & remaining 40% to another vendor.
    user allready created Po for 1st vendor (60% Quantity).
    Now system showing error " Quantity is allready full for reference PR"
    I want to know what is the procedue to solve this issue & customization.

  • How to create new Batch No for An Item

    Dear All,
              I am doing Issue for production task through DI API. In that I need to Create a Batch no for an Item. That item was created as Batch with Release only in Item Master. Please help me how to create the batch no when I am Issue for Production ?.
    Thanks,
    lingam.

    Dear Lingam,
    If the process need manual selection as the one you are requesting, it will not be available to DI API. You may try UI API to see.
    Thanks,
    Gordon

  • Error while creating a transfer order for delivery note.

    Hi Gurus,
    I have already created an outbound delivery.  I am creating a transfer request as a basis for goods movement in the warehouse and to print the picking list. so i use the path:
    Logistics -> Sales and Distribution -> Shipping and Transportation -> Picking -> Create Transfer Order -> Single Document.
    Now here i enter the warehouse number, plant, delivery. when i press enter i get error "No items that are to be picked were found".
    I went to the following IMG path -- Enterprise Structure --> Assignment --> Logistics-Execution --> Assign Warehouse number to plant/storage location.
    Assign the warehouse to the plan and storage location.
    Still i get the same error. Could some one help me out here?
    Thanks in advance
    Amit

    Hi,
    can you check whether Warehouse number exists and transfer order creation is required or not at Delivery document under Picking tab

  • How to create separate log files for each deployed web application in oc4j

    Hi All,
    I am using Windows2000, Oracle9iAS(OC4J). Say I have deployed 3 web applications onto this oc4j server. Then how to create 3 different log files so that I can see the log messages(System.out.println's) of each of these web appliations in a different log file.
    Thanks and Regards,
    Ravi.

    Where do the messages printed via ServletContext.log() go? Is this configurable separately by web application? If so, you could at least replace your System.out.println() with sc.log() statements. For exceptions, you could trap them and log them since the log() method takes a throwable as well as a String.
    John H.

  • Creating a transfer order for a Billed Delivery

    Hi,
    After billing a delivery, wich already had picking confirmed, the picking field in the delivery was blanked.
    Is there a way to create a new tranfer order for this delivery, even if it is already Billed?

    Hi,
    Thanks for the answers. After some tests we find the solution!
    In this case we change the billing status of the delivery to "A", then was possible to create a new transfer order, without cancel the billing.
    In Brazil we can´t cancel the billing document after the goods to have left.
    Thanks,

  • How to create a sales order for one-time customer

    Hi all,
    I have a requirement where in creating a sales order, I have to add the tax code for one-time customer. This is not the tax jurisdiction but it is a text field that you can see in Further attributes and it will store in VBPA3 table.
    My plan was create sales order first using SD_SALESDOCUMENT_CREATE or BAPI_SALESORDER_CREATEFROMDAT2. Then I used BDC of va02 for changing the salesdoc. But the problem is, we can't proceed because there's a message "TAX HAVE REDETERMINED"  that it doesn't included in recording a transaction.
    Another one is, instead of calling the standard bapi, I used BDC for VA01. Again, upon recording there was anothe message popped up "FREIGHT REDETERMINED". And it's not in the recording so we can't proceed.
    Would you know what field is for the tax code when I use SD_SALESDOCUMENT_CREATE or any standard bapi? Is there other way aside from calling a standard bapi or bdc?
    Points will be given..Thanks!

    Good afternoon Bella,
    We are in a project that exactly need this solution. Could yoy please explain me how you solve the issue ?
    Kind regards

Maybe you are looking for