How to create Standard text for terms and conditions of po print form
Hi anybody,
I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
How i will do ? anybody please tell me.
Thanks
S.Muthu.
Hi Subramaniyan,
U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
Text Name &**-EBELN&
Text Object EKKO
Text ID xxxx
Language &**-SPRAS&
is the data at your end .To simplify more follow the following.
1> go to your purchase order from me23n
2> open any purchase order and click on the terms and conditions text.
3> go to GOTO option of the text.and click on the HEADER.
4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
The long texts arestored in STXH table.
Reward Points if useful.
Cheers,
Deepthee Kasal
Similar Messages
-
How to change the text of Terms and Condition of PO.
I have given an task to add some text to the current TERMS and CONDITIONS (T&C) of a PO. Idea is to decrease the size of fonts also as after adding the new paragraph, the T&C itself will print on 2 pages. So decrease in font size is needed to fit the T&C on one page.
Kindly tell me how I can add text to T&C of PO and also decreasing the size of fonts
Thanks,
miniyes SO10 wont ask for the CTS.
Please follow this steps.
Run the report RSTXSCRP
Please fill the selection screen.
the name of the text should be in this fiels, Text key - name
Hit execute
The required should be selected and hit enter
Push the push button on the top left - Trsfr texts to corr
It will ask for a request.
You will get the CTS and then move ahead.
Shreekant -
Hi..how we enter standard text for smartform using include text
hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get textHi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create a Templates for Categories and Products In BCC
Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik -
How to create fxplug transition for xcode and quatrz composer
how to create fxplug transition for xcode and quatrz composer?
Hi Mohan,
You have to create and configure your system in the system administration tab in the portal.
Usually, it looks like the following:
System from template: JDBC System
Connector properties
Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
User management properties
User mapping type: admin, user
Set the system with an alias.
Go to user administration tab and map the user with VCRole to the configured system
(the default for MSSQL is usauly user: sa and pw: admin)
Save your changes and logon to VC with this user.
The alias name should appear in your list of systems.
Hope I helped,
Shay -
HT4623 how to agree on the new terms and conditions iOS 7
how to agree on the new terms and conditions for iOS 7 am not able to downloade any apps until i agree on the terms and conditions
Settings >>>safari>>>block cookies >>>change to 3rd parties etc
Thanks to many other posts -
How do I accept the icloud terms and conditions if i'm "unable to connect to server"?
How do I accept the icloud terms and conditions if i'm "unable to connect to server"?
Or how do I stop the incessant pop messages that tell me I need to do this?Hi Mark,
Try resetting your device and try again: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears. Once the Home screen comes back up, see if the next time the Terms & Conditions popup displays you are able to log on.
You can also try deleting the iCloud account and then signing back in again: Settings>iCloud, scroll to the bottom and Delete. Follow prompts to complete Delete, then sign back in again.
Cheers,
GB -
How to add standard text in PO and how it is maintained ?
How to add standard text (paragraph) in PO and how it is maintained ?
Hi
Please go through this document.which has a step by step
Working with Frequently Used Texts
Use
You can copy texts from various sources to create PO texts:
Standard texts
Certain standard texts are supplied with the system and can be assigned to a purchasing document in Customizing.
The content of some standard texts is predefined by your system administrator.
You can also create standard texts yourself and copy them into purchasing documents.
Master records
Database fields
Activities
Creating Standard Texts
You can create your own standard texts via Tools ® SAPscript ® Standard text.
Inserting Standard Texts
You can insert your standard text on the long text screen via Insert ® Text ® Standard.
For more information, refer to the Basis documentation under BC Word Processing with the SAPscript Editor: Including Texts.
You can display the print preview via Text ® Print ® Print preview.
Inserting Texts from the Master Record
There are three ways of linking texts from a master record with a purchasing document. The relevant settings are made for each text type in Customizing for Purchasing. The indicator in the status column shows the nature of the linkage.
Option Indicator in status column
The text is copied:
It is then independent of the text None
in the master record. Changes to
the text in the material master record
have no influence on the text in the document.
The text is displayed only:
It cannot be adopted. N
The text is offered for copying:
It can be copied via Header or Item ® Texts ® Adopt text. (In requisitions: Goto ® Texts ® Adopt text.) Changes made in the master record will also be adopted in the document until such time as you copy the text.
Inserting Texts from Database Fields
You can include the content of a database field at any point in the text on the long text screen. A value specific to the relevant document is displayed in the printed document.
Choose Insert ® Symbols ® Program symbols.
Choose DDIC fields.
Search for the relevant table/structure (in the case of PO items, this is EKPO) and then choose ENTER .
Choose the relevant table field.
Choose Text ® Print preview to see the print preview.
Reward if useful
Aasif -
How to create Presentation variable for columns and to use it in Narrative?
Hi All,
Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
Thanks in Advance
ThenmozhiHi Satya,
I just want to create a table that should horizontally display the values like below:
SUID Tag # :123456 Year Mfg: 2007
Description: computer corporation FA ID#: 4576
Model Number: 4569 hESC: #ert
Serial Number: 78945 Flags: c
Department: Hematology
User: thenmozhi
Database: OLAP
I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
Then the first value for example 123456 and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
SUID Tag # :678901 Year Mfg: 2008
Description: Computer Manufacturing FA ID#: 4577
Model Number: 4570 hESC: #eth
Serial Number: 78946 Flags: G
Department: Hematology
User: Rehman
Database: OLAP
Thanks
Thenmozhi -
When I go to Settings iCloud on my iPhone 5s I am prompted to agree to the latest terms and conditions. When I press agree the phone just hangs and I cannot agree to the latest terms and conditions. I am trying to change my apple id for iCloud which is incorrect on my phone, can anyone help. It is most annoying when I am prompted to log into icloud everytime I start my phone but I cant as I do not know the password to my old non existent email address.
Welcome to the Apple community Linda.
Have you tried deleting the account! restarting the device and trying again. -
HT2978 how do you turn off the terms and conditions of genius on the iPhone
i wanted the genuis on my iphone but i tried to cancel it and it would not do anythig .
Can someone please help me by answering my question.
Thank youI also have this same issue, I can't leave the page by exiting and check out the App Store nor continue with the Terms and Conditions of the Genius for Apps.
-
Table for terms and conditions
what is table for terms and conditiions??
regards
jyotiHi Jyoti,
If u are looking for the payment terms then the table T052 and T052U.
Regards
Kiran Sure -
HT1904 How do you except the itunes terms and conditions
I am trying to download some new apps on my phone but after the software upgrade to IOS 7 it keeps saying you need to read and except the new itunes terms and conditions, and i cant find them,
Can you please helpsame problem. i was able to scroll through all 54 pages of the terms and was hoping some idiot in Legal was forcing us to do this but on page 54, still not Agree button. Only choice is to cancel out. I wonder how much money the App store is losing every minute...
-
Ipod touch help with missing accept button for terms and conditions
I want to update my apps but when I try it tells me that i first have to accept the new terms and conditions, however, there is no accept button to click.
I have tried the other option to have it sent by e-mail but when I open the e-mail it's still the same with no accept button.
I went into settings and allowed cookies on safari.
I have an ipod touch 4th gen with ios 6.1.3. I am also not able to buy any apps, music , etc.
Someone PLEASE help!!!!Under Safari settings I have also "cleared history" and "cleared cookies and data"
I have also given the i-pod both a restart, and a hard restart (holding the power and home buttons until the apple appears)
"private browsing" is set to off. "block pop-ups" is off too.
Maybe you are looking for
-
How do I delete my iCloud account? It asks for my old email?
I want to delete my iCloud account because it's using my old email. When I try, it asks for a password which I've forgotten. If i resetted it, it would not work because my old e-mail is no longer in use. I really want to use iCloud on my new ios7 de
-
Create PDF which does not allow to print
My customer would like to use smartform HR_ESS_PAYSLIP_TO_PDF. The requirement is to convert the payslip to PDF, not allow to print the PDF. The <b>no print</b> information should be included in the document itself. I know this is generally possible
-
The "temp" folder is the 800 pound gorilla of Captivate that keeps growing every time I create a new project. I've used Captivate extensively since I had it installed last spring, and the temp folder, located within "Local Settings" within the "Docum
-
Hello I am using this to validate email addresses and it does not seem to work: } else if (!email_txt.length || email_txt.indexOf("@") == -1 || email_txt.indexOf(".") == -1) { status_txt.text = "Invalid Email."; I would, in any case, prefer to use th
-
I don't have sound on youtube, music, etc...
the sound is on, but i cannot hear any kind of sound produced from any video or music.