How to create table dynamic

Is it possible to use dynamically configure the JDO at runtime?

Do you mean that you would like to synchronize the schema to match your
mapping information at runtime? If so, then you could probably just invoke
the MappingTool from your code. See the javadoc for
kodo.jdbc.meta.MappingTool for details about the API.
In article <bsri7l$i79$[email protected]>, netsoldier wrote:
Is it possible to use dynamically configure the JDO at runtime?--
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Similar Messages

URGENT!!!!How to CREATE TABLE dynamically

HI all
i want to create a table in a pl/sql procedure
where requirement is to create a table dynamically.
can anybody suggest me the solution.

Why is this urgent? creating a table dynamically ought to be a rare event, required only by certain kinds of rather specialised applications.
When people ask us how to do it in these forums, it's often because they are coming from an MS SQL background and haven't understood Oracle's concept of global temporary tables.
Cheers, APC

How to create a dynamic table were the JTable columns keep varying

How to create a dynamic table were the JTable columns keep varying based on the input to the jtable

Oooh, I lied. DefaultTableModel has an API for adding and
removing columns. I didn't know that. You should have read
the API.
As for preferring to extend AbstractTableModel rather than
DefaultTableModel, I think it's more correct. DefaultTableModel
is a simple implementation of Abstract for basic cases. It isn't
intended to be extended. I figure most people extending
DefaultTableModel are also extending JFrame, JPanel, and Thread
instead of encapsulating the first two and implementing
Runnable for the third.

How to create a dynamic mapping of columnar at the Runtime using ADF or JSF

How to create a dynamic GUI at the Runtime using ADF or JSF in JDeveloper 11g.
What I am trying to build is to allow the user to map one column to another at the run time.
Say the column A has rows 1 to 10, and column B has rows 1 to 15.
1. Allow the user to map rows of the two tables
2. An dhte rows of the two columns are dynamically generated at the run time.
Any help wil be appreciated.....
Thnaks

Oracle supports feedback form metalink was; "What you exactly want to approach is not possible in Htmldb"
I can guess that it is not
exactly possible since I looked at the forums and documantation etc. but
couldnt find anything similar than this link; "http://www.oracle.com/technology/products/database/htmldb/howtos/tabular_form.h
t". But this is a very common need and I thought that there must be at least a workaround?
How can I talk or write to Html Db development team about this since any ideas, this is very important item in a critial project?
I will be able to satisfy the need in a functional way if I could make the
select lists in the tabular form dynamic with the noz_id;
SELECT vozellik "Ãzellik",
htmldb_item.select_list_from_query(2, t2.nozellik_deger, 'select vdeger
a,vdeger b from tozellik_deger where noz_id = 10') "Select List",
htmldb_item.text(3, NULL, t2.vcihaz_oz_deger) "Free Text"
FROM vcihaz_grup_ozellik t1, tcihaz_oz t2
WHERE t1.noz_id = t2.noz_id
AND t2.ncihaz_id = 191
AND t1.ngrup_id = 5
But what I exactly need i something like this dynamic query;
SELECT
vozellik "Ãzellik",
CASE
WHEN (t2.nozellik_deger IS NULL AND t2.vcihaz_oz_deger IS NOT NULL) THEN
'HTMLDB_ITEM.freetext(' || rownum || ', NULL) ' || vozellik
WHEN (t2.nozellik_deger IS NOT NULL AND t2.vcihaz_oz_deger IS NULL) THEN
'HTMLDB_ITEM.select_list_from_query(' || rownum ||
', NULL, ''select vdeger a,vdeger b from tozellik_deger where noz_id = ' ||
t1.noz_id || ''' ) ' || vozellik
END AS "DeÄer"
FROM vcihaz_grup_ozellik t1, tcihaz_oz t2
WHERE t1.noz_id = t2.noz_id
AND t2.ncihaz_id = 191
AND t1.ngrup_id = 5
Thank you very much,
Best regards.
H.Tonguc

How to create table in bisystem

hi,
how to create table in bi system.
My requirement is such like that i want to store data which is used in the routine.
i want to maintain the data dynamically so that i want to create the table.

Hi.........
Same as ABAP only...........using SE11........
Steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Hope this helps......
Regards,
Debjani..........

How to create Hyperlink dynamically

Hi All,
In my application , iam using one table , one of the field in that table is input field,
when i entered data in that field at runtime, automatically that field value should become hyperlink, to show another table.
is it possible to do, if possible please help me in this how to create field dynamically.
regards,
sush

Hi Sushma,
What I get is that at runtime, you will fill the input field with some value & wish to have the field changed to a link.
Adding to what Armin has said, keep the input field as it is. Add a new column in the table, create the TableCellEditor of type LinkToURL (if it is a URL value) or LinkToAction (if some value).
For LinkToURL type, set the 'reference' property to the same context value attribute as the input field.
For LinkToAction type, set the onAction event where you call the appropriate code.
You can also set the 'text' property as Link or bind it to this context value attribute as well.
Hope this works.
Kind Regards,
Nitin
Edited by: Nitin Jain on Mar 25, 2009 9:14 AM

How to create a Dynamic Datatable with sorting functioanlity

Hi,
I am new to JSF and need some help can some one please tell me how to create a dynamic datatable with sorting functionality. I am reading data data from a database table and wants to build the datatable dynamically based on the columns returned. I know how to created a datatble with a fixed number of columns but can't figure out how to create a datatable dynamically with sort functionality. Any small example will help.
Thanks

Hi,
Here is what I have so far and can't figure out how to add the sorting functionality. Any help is appreciated.
Managed Bean:
private List<MyDto> data ;
 public HtmlDataTable getDataTableOne ()
 if ( dataTableOne == null )
 populateCheckBoxes () ; // Preload.
 populateDynamicDataTableOne () ;
 return dataTableOne ;
 public void populateCheckBoxes ()
 data = new ArrayList<MyDto> () ;
 MyDto myDto1 = new MyDto () ;
 MyDto myDto2 = new MyDto () ;
 MyDto myDto3 = new MyDto () ;
 MyDto myDto4 = new MyDto () ;
 myDto1.setChecked ( true ) ;
 myDto1.setValue ( "myDto1" ) ;
 myDto2.setChecked ( false ) ;
 myDto2.setValue ( "myDto2" ) ;
 myDto3.setChecked ( false ) ;
 myDto3.setValue ( "myDto3" ) ;
 myDto4.setChecked ( true ) ;
 myDto4.setValue ( "myDto4" ) ;
 data.add ( myDto1 ) ;
 data.add ( myDto2 ) ;
 data.add ( myDto3 ) ;
 data.add ( myDto4 ) ;
 public void populateDynamicDataTableOne ()
 dataTableOne = new HtmlDataTable () ;
 UIOutput header = new UIOutput () ;
 header.setValue ( "" ) ;
 UIColumn tableColumn ;
 tableColumn = new UIColumn () ;
 HtmlOutputText textHeader = new HtmlOutputText () ;
 textHeader.setValue ( "" ) ;
 tableColumn.setHeader ( textHeader ) ;
 HtmlSelectBooleanCheckbox tCheckBox = new HtmlSelectBooleanCheckbox () ;
 tCheckBox.setValueBinding ( "value" , FacesContext.getCurrentInstance ().getApplication ().createValueBinding ( "#{row.checked}" ) ) ;
 tableColumn.getChildren ().add ( tCheckBox ) ;
 // Set output.
 UIOutput output = new UIOutput () ;
 ValueBinding myItem = FacesContext.getCurrentInstance ().getApplication ().createValueBinding ( "#{row.value}" ) ;
 output.setValueBinding ( "value" , myItem ) ;
 // Set header (optional).
 UIOutput header2 = new UIOutput () ;
 header2.setValue ( "" ) ;
 UIColumn column = new UIColumn () ;
 column.setHeader ( header2 ) ;
 column.getChildren ().add ( output ) ;
 dataTableOne.getChildren ().add ( tableColumn ) ;
 dataTableOne.getChildren ().add ( column ) ;
MyDto.java
public class MyDto
 private Boolean checked;
 private String value;
 public MyDto ()
 public void setChecked ( Boolean checked )
 this.checked = checked;
 public Boolean getChecked ()
 return checked ;
 public void setValue ( String value )
 this.value = value;
 public String getValue ()
 return value ;
JSP
<h:dataTable id="table" value="#{myRequestBean.data}" binding="#{myRequestBean.dataTableOne}" var="row" />Thanks

How to create the dynamic report

Hi,
please help me, how to create the dynamic report

Hi,
Try this..
DATA: p_temp(30) TYPE c DEFAULT 'ZTEST_REPORT'.
TYPES: BEGIN OF t_abapcode occurs 0,
        row(72) TYPE c,
       END OF t_abapcod.
T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'WRITE: / ''TEST REPORT''. '.
APPEND T_ABAPCODE.
INSERT REPORT p_temp FROM it_abapcode.
      SUBMIT (p_temp) AND RETURN.
      DELETE REPORT p_temp.
Thanks,
naren

How to create a Dynamic IAF in WD

Dear all,
We'd like to create a dynamic interactive form based on a XDP in a WebDynpro application. How can we achieve this?
We tried to use setDynamicPDF() and setInteractive(), but it looks like ADS doesn't create a dynamic pdf.
Only the master page is being displayed.
Any ideas how to create a dynamic interactive form via ADS and how to determine if the pdf is a dynamic interactive form (in the browser).
Kind regards,
Noël
version info: Designer 7, NW SP15, Reader 7.0.7.

Hello,
Use the following code to get a dynamic pdf document created in your wdDoModifyView() method. Make use of the firstTime flag there if required :
IWDInteractiveForm iForm =
(IWDInteractiveForm)view.getElement("InteractiveForm1");
iForm.setDynamicPDF(true);
setDynamicPDF(boolean) nmethod has been deprecated in 04. Moving forward to 04s, you will have a different set of APIs to deal with such requirements. Hence the abiove mentioned method will be taken off with the next major release of NetWeaver.
How do you know whether the pdf document created is static or dynamic ? Well, save the form locally and open it in the designer. Go to File > Form Properties > Compatibility Tab. Check your Form Type there.
Best Regards,
Krish

How to create a dynamic link in a Form to link to a specific FOLDER

Hello,
I have created a reports of all employees of my department.
This reports shows me the empno and ename
When I clicked on a empno ( for example empno = 1 ) then then I got a MASTER DETAIL FORM about that employee(empno = 1) .
Who he or she is and which course he or she had followed.
I want create a dynamic link in the MASTER DETAIL FORM which shows me directly the folder of that employee ( in this example folder 1 ).
If I clickt on the report with all employees of my department on an other number ( for example empno = 3333333) then if I click on the dynamic link in the MASTER DETAIL FORM I want to see the folder of employee 3333333 !!! You know what I mean ?
What I want to know is, how to create a dynamic link that shows me directly a folder which is dependent on which empno I had clicked on in the report ( report with employee numbers and ename )
Is there any way to pass some parameters into a link to a Folder ? Is this possible in Portal ? Does anyone know how to do this, or do you have a suggestion how to solve this problem ?
Thanks a lot !!!
Chu Lam

Hi Chetan,
I am glad that someone had replied on my question.
I will explain it to you again.
I have created a report that shows me all employees. If I click on a employee number then I get an MASTER DETAIL FORM on my screen with all the information(where he works now and which number I have to dial ifhow can I reach him by telephone) of that employee on which number I clicked on.
I really like this mechanism. (You click on a number and the information that you see in the next screen is dependent of the number you clicked on ! )I have created all this. It works fine.
What I want is to expand this example.
Every employee has a FOLDER (yes, those ones in Content Area ) which they can insert text or image into that folder. The folder name is just the employee number. ( employee with employee number 3303, he owns a folder which is named 3303 and an employee with empno 9999, he or she owns a folder with the name 9999. )
Every employee can tell more about himself in that FOLDER by iserting text and images. For example : What he likes, pictures of his vacation, something like this.
What I want is this :
If I click on the first report,which provides me all employees on screen, on a employee number 3303 then I get a Master Detail Form on my screen with all information about that employee with employee number 3303. And I want in this MASTER DETAIL FORM to create a link that shows me directly the FOLDER of that employee ( 3303), so I can learn more about employee with employee number 3303. But I don't know how to create this link.
That link had to be dependent on the employee number. The difficult thing about this link is that this link had to be dynamic.
I hope this will make it clear to you :
(report all employees:)
empno ename
3301 john smith
3302 peter clark
3303 wilson jones
If I click on a empno ( for example 3303) then I get a MASTER DETAIL FORM which provides me information.
(MASTER DETAIL FORM )
EMPNO 3303
ENAME wilson jones
department New York
mobile number 98908763
Company tel. no day
AOL 097485838 monday till wednesday
Oracle 04848584333 thursday and friday
LINK
(what I want is to create a link here )
If I click on LINK in this MASTER DETAIL FORM then I want to link to the FOLDER of this employee ! ( In this example it is FOLDER 3303.
BUT IF I CLICKED ON THE FIRST REPORT ON A DIFFERENT NUMBER ( FOR EXAMPLE 3301) THEN IF I CLICK ON LINK IN THE MASTER DETAIL FORM THEN I HAVE TO LINKED TO FOLDER 3301.
I just want to know how to make a link like this ( create a dynamic link to a specific folder ).
Thanks in Advance.
Chu

How to create table in java

i need help on this topic
how to create table in java

lucky786 wrote:
help urgentlyI am too late?

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

Tutorial Announcement .:: How to Create a Dynamic RSS Feeds ::.

.:: How to Create a Dynamic RSS Feeds ::.
Using Adobe Dreamweaver 8 and InterAKT Rss Reader Writer Extension.
Hello everyone...
RSS feeds are very useful within sites, as they allow integrating for you website content in an automatic manner. Just share the source for the RSS feed, and when the original content changes, it will reflect in the content you share with any one who subscribed in this feeds on your site.
In this tutorial i`ll help you integrate a RSS feed into one of your pages. This will display the content of your website to feeds subscribers with up to date content.
The main purpose of this tutorial is to create a page that allows visitors subscribe to the RSS Feed that they want to see from your website content, or even enter their own in a text box by searching through feeds. also you can define feeds categories if your website is online store, merchant etc...
:: Online Demo ::
:: Go to tutorials ::
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.com

Hey Waleed,
thanks again for this great stuff -- and thanks for removing the login protection :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How to create a dynamic property in JavaFX

public class Person() {
private SimpleStringProperty _Name = new SimpleStringProperty();
public final String NameGet() {
return this._Name.getValue();
public final void NameSet(String Name) {
this._Name.setValue(ColumnName);
public StringProperty NameProperty() {
return this._Name;
private SimpleStringProperty _SurName = new SimpleStringProperty();
public final String SurNameGet() {
return this._SurName.getValue();
public final void SurNameSet(String SurName) {
this._Name.setValue(ColumnName);
public StringProperty SurNameProperty() {
return this._SurName;
How to create a dynamic property in JavaFX ?
ObservableMap, ObservableMapValue, MapPropertyBase, MapProperty
Which one should I use. Can you give an example?

I'm not sure what you mean by "dynamic property"; can you be more explicit?
Your code creates two properties that can be read, written, and observed for changes, though it's probably better to use the standard naming scheme for the methods (e.g they should be getName(), setName(...) and nameProperty()).
An ObservableMap is an extension of the java.util.Map interface that can be observed; i.e. you can register a listener that will be notified if a key-value pair is added or removed from the map.
ObservableMapValue is an interface that defines an observable reference to an ObservableMap; i.e. it has a get() method returning an ObservableMap and a set(...) method taking an ObservableMap. You can register a ChangeListener which is notified when the set(...) method is called. It additionally functions as an ObservableMap, so you can also register listeners that get notified when key-value pairs are added or removed from the underlying observable map.
MapProperty and MapPropertyBase are effectively partial implementations of ObservableMapValue. SimpleMapProperty is a full implementation.
If you just need a single ObservableMap (i.e. not an observable reference to one), then the FXCollections.observableHashMap() factory method will provide one.

How to create table dynamic

Similar Messages

Maybe you are looking for