How to create table maintainenece Generator

hi all
I dont know how to create table maintainence generator after creating the table.
I have created the table.
After that how to maintain the table.
What is the use of table maintainence generator.
Thanks

Hi Muthu,
Through table maintenance you can direct add new entries in your table. For that u need to follow some steps.
Step1 : Click Delivery and Maintenance tab in your table and select "Display/Maintenance Allowed"
Step2 : Utilities--->Table maint generator
Step3 : Give Authorization Group - &NC&
Step4 : Function group - Any ( You can give ur table name also ) This Function Group will genrate automatically.
Step5 : Maintenance type - Select first radio button "One Step"
Step6 : Maint. Screen No. - Overview screen as 1
                                              Single screen       as 0
Step7 : Click on Create button on application tool bar
Step8 : just save in your package.
Step8 : Create transaction code for the same . Environment----->transaction code
Step9 : Give any t.code name and click on create button. You will get a popup where you have to choose last radio button "Transaction with parameter"
Step10 : Give the transaction name - SM30 and check Inherit GUI Attribute"
Step11 : GUI Support - check all the check boxes.
Step12 : Name of screen field           Values
                VIEWNAME -                   Table name and
                UPDATE      -                      X
Finally u can this t.code and add new entries in ur table directly.
Regards,
Amit Nanda
SAP Consultant

Similar Messages

How to create table.maint.generator and enduser should use using ztcode

Hi,
can any one guide me how to create table maintanence generator and after creating,enduser must use using ztcode.
any help can be appreciated.
Thanks & Regards,
Sandeep.

Hi,
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
some more helps
Check out this thread:
table maintenance
http://help.sap.com/saphelp_erp2005/helpdata/en/a7/513520407a11d1893b0000e8323c4f/frameset.htm - a link for basics on Table Maintenance.
Also, Check out this weblog on table maintenance:
/people/sudheer.cheedella/blog/2006/02/20/extracting-data-in-table-maintenance
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
rgds
anver
if hlped pls mark points

....how to create table maintanence generator for a z table and how to use

Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddy

Hi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator

Follow below steps
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka.

How to create table maintenance generator?

Dear Sir/Madam,
when i am creating table maintenance generator , it asks for function group
i give 0MB8 , it says u r going to change function group which does not belongs to u,
then i created a function group yfg9 and given , it then says yfg9 cannot be processed.
please telll me how to create the table maintenance generator for maintenance view yv_mmim_rep_cust.
Thanks in advance,
Dastagiri

Hi ,
Table Maintenance generator is used to maintain data in table , instead of giving access to se11 , we create a tcode for this table maintenance generator and we will give this tcode to end-user to maintain data
To generate table Maintenance generator :
click on UTILITIES in menu bar
-> table maintenance generator
-> enter Authorization Group as : &NC&
-> Enter Function Group : name of your table ( so it will create a function group , to check this function group go to tcode se80 : then select function and enter your Table name )
-> Then click on find screen numbers in Application tool bar.
-> Then click on create button in Application tool bar
if it is created successfully , then you will get a status message like table maintained generator is created successfully.

How to create tables in Database when webdynpro project is deployed

Hi
I Created a project.in that i created stuctures using simpletypes.Based on structure i created the Context,then created screens.Now how to create tables in database using this structures .Because i want to store the values in the database.Please help.this is very urgent.i will give good points
thanks
prasad

Hi Prasad,
You can write normal JDBC code in your controller.
Check this Web Dynpro Java
You can use the tool for generating the classes from your DB.Check this too
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dfad6017-0301-0010-bdb8-a8b7d2006f36
Best Regards, Anilkumar

Table maintainenece generator

Hi ,
When we creating table Table maintainenece generator for ztable ... in this
when we select ONE STEP AND TWO STEP OPTIONS..
IN MAINTAINENECE SCREENS??
REGARDS,

hi check this..
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
regards,
venkat

DirectToXMLTypeMapping "create-tables" not generating XMLTYPE column type

Can someone tell me how to code an XMLTYPE field such that "create-tables" will generate the XMLTYPE column and such that the IntegrityChecker will not throw an error.
I am forced to run these alters after "create-tables" is run.
ALTER TABLE XML_SYS_MSG drop column message;
ALTER TABLE XML_SYS_MSG add (message XMLType);
Snippets:
<persistence...
<property name="eclipselink.ddl-generation" value="create-tables" />
</persistence>
public class XmlMessageCustomizer implements DescriptorCustomizer {
@Override
public void customize(final ClassDescriptor descriptor) throws Exception {
final DirectToXMLTypeMapping mapping = new DirectToXMLTypeMapping();
descriptor.removeMappingForAttributeName("message");
// name of the attribute
mapping.setAttributeName("message");
// IntegrityChecker requires uppercase for oracle
// name of the column
mapping.setFieldName("MESSAGE");
descriptor.addMapping(mapping);
@Entity(name = "XmlMessage")
@Table(name = "XML_MSG")
@Customizer(XmlMessageCustomizer.class)
public class XmlMessage {
@Id
@GeneratedValue(strategy = GenerationType.AUTO)
@Column(name = "ID")
private long id;
// @Column(columnDefinition = "XMLTYPE")
// private String message;
// ALTER TABLE XML_SYS_MSG drop column message;
// ALTER TABLE XML_SYS_MSG add (message XMLType);
private Document message;
public XmlMessage() {
public long getId() {
return id;
public void setId(final long id) {
this.id = id;
public Document getMessage() {
return message;
public void setMessage(final Document message) {
this.message = message;
Secondly if I turn on the IntegrityChecker it will fail
public class EnableIntegrityChecker implements SessionCustomizer {
@Override
public void customize(final Session session) throws Exception {
session.getIntegrityChecker().checkDatabase();
session.getIntegrityChecker().setShouldCatchExceptions(false);
}

Adding:
mapping.getField().setColumnDefinition("XMLTYPE");to the customizer should solve the problem.
--Shaun

How to create tables for control data

HI
How to create tables for controls of types of data (screen control)? what is the process for this
Regards,
Anil

Well, do you want to do it the easy way? If so, then just create a table maintenance program. You can do this via SE11, utilites, table maintenance generator. The table maintenance will be generated and you can then maintain the table via SM30.
If you want to go the more challenging way, you can write your own table maintenance program using a table control on your screen. You can use the table control wizard to help you along.
Regards,
Rich Heilman

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

How to create table in java

i need help on this topic
how to create table in java

lucky786 wrote:
help urgentlyI am too late?

How to create table in bisystem

hi,
how to create table in bi system.
My requirement is such like that i want to store data which is used in the routine.
i want to maintain the data dynamically so that i want to create the table.

Hi.........
Same as ABAP only...........using SE11........
Steps for creating table:.
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
Hope this helps......
Regards,
Debjani..........

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

Can we create table maintence generator with out key field

Hi,
I have created a ztable in that client is the primary key as I don't want any other field as primary key.
For this i have created table maintenace generator but when i open it in sm30 blnak screen is coming.
Here my question is can we create a table maintenace generator with out key field other than MANDT.
If it's possible please let me know.
Regards
hari

>
Mathews Joseph wrote:
> I agree to the above points , but you can try one thing.
>
> When you create the table maintenance screen , from SE11 you assign a function group.
>
> Double click on the function group and you can go to the main program and open that in SE80, take screen generated and try manually adjusting the screen and putting the non key field details...
>
> Not sure this will work , but may be you can give it a try.
>
> Mathews
But the table could hold at most a single record (per client). The design is lacking.
Rob

How to create table and digital signature ?

Hello,
I would like to ask two questions regarding SAP interactive forms by adobe.
1st question:
How to create table in interactive form?
Table that i can add rows and column and will show it in the form.
Example the rows and columns that i want:
ID: Name: DOB:
1 Jack 01/02/80
2 Ivy 10/12/82
2nd question:
How to create digital signature ?
I'm creating a adobe forms which need employee to sign on the form. I use signature field at my form. However, i don't know how to create a new signature and insert in the signature field.
Can any one provide the answer with step by step guide?
Thanks a lot

Hi Pradeepa,
you said you have your digital signature in
BMP format? That means Bitmap and would mean you are actually talking about a picture! THIS IS NOT A DIGITAL SIGNATURE!
A digital signature is a cryptographic key (aka public key cryptography) that is used to digitally sign a document, or at least a hash value derived from the document. Digitally signing means, applying the key in a well defined way (this is the algorithm used) to the document or hash value. You do this with your private key and the receiver of the document can then use your public key (which you can distribute in any way you want, even unsecure) to unencrypt the hash value. If this succeeds the receiver knows that the document was signed by you.
This is because both keys are mathematically related in such a way, that what one key encrypted can only be decrypted by the corresponding other key and by no other key. You even can´t decrypt a document with the same key it was encrypted with, this is the difference to symmetric encryption - please have a look at help.sap.com and search for digital signatures.
The named formats (afs, pfx and p12) are ways of coding the key, together with information about your person, such as email address and information about validity of the key into a
certificate. This type of certificate is then called a x.509 certificate and is the same you might have seen when connecting to a secure webserver such as the one of your bank website.
Signing a form with such a certificate provides for mathematically and therefore business related proove of a users identity.
In case you are really using a bitmap, this cannot work and would not serve you any good.
Ask yourself this question: I want to make sure that the form was signed by a specific person. How can I make sure that the signing can only be done by the person pretending to have done so?
A bitmap contains a picture, probably of the persons handwritten signature. How can I make sure that this picture was NOT recreated in MS Paint or Photoshop by someone else?
The answer is:
you can't! Therefore this way of prooving identity is useless.
You need to provide your users with digital signatures, put these in the certificate cache of your IE. If a user then clicks on the signing field, the private key is used to digitally sign the form - create a hash value of the form and encrypt it with the private key. After the form is send back to the server or you, you use the corresponding public key to decrypt the hash value and, as said above, if this succeeds, identity of the signer is proven.
THIS IS AN OVERSIMPLIFICATION! You might want to take a look at Adobe Reader Credentials.
Regards,
 Christian

How to create table maintainenece Generator

Similar Messages

Maybe you are looking for