How to create the effect of a face pushing through a wall?

Hi,
I'm trying to make a face look like it's pushing through a wall, a bit like in A Nightmare on Elm Street:
Not having much luck though, and can't find anything n the internet. Any ideas?
Thanks,
Lloyd

Several different ways to do this. You could stretch a sheet of plastic and have someone press their face into it. Doing it in photoshop. you can take and face and then create a displacement map to bend the shape of the wall then appling the image as a B&W in overlay mode to give the shaped tones to the wall. Such as the image below of the face on the path. The other option would be to get a 3D face like those in Poser, bring it into PS and convert it to a depthmap and then blend the depthmap with plain backgroud by blurring the edges, such as the other image attached of the face coming out of the building.

Similar Messages

How to create these effects? What is the most excellent effects resource on interwebs?

I always stumble upon excellent arts with effects I have no idea how to create. I bet most effects are very elementary and easy to create, but I just don't know how.
The most recent ones is this
http://www.wiseidea.net/nightblack/images/2c.jpg
How to create the "old" effect/stain? How about the fire glow+fire stain on paper?
Besides that,
What's the most excellent effects guides you've seen online with great application of effects to artwork?
You don't need to answer all of them, any would be appreciated.
Thanks!

You may try and create overlays with raster images using opacity masks. Also try the blending modes.

How to create the droste effect in photoshop cc 2014?

In the past you could use pixel bender to create the droste effect, that is what I have found out from the internet.
But how to create that effect today seams non existent on the net!
Can any one help?
KR,
AJ

Right. Pixel Bender is gone. It was an experimental filter available from Adobe Labs but never made it into an actual product release. As of CS6, Oil Paint filter was introduced. It's not the same thing but more like a shaved down version of Pixel Bender.
Look at Filter Forge. They offer a 30-day trial. Disclaimer: I've never used it myself.
Droste Spiral (Effect)
Filter Forge - Download Free Photoshop Plugins!
Nancy O.

How can I create the effect in this photo?

I'd like to know how to create the orange and grey coloring on this photo. I have Photoshop CS6. Any help would be appreciated. I have been playing around to no avail. Thanks in advance.

Use a brush with the type of look in the image and with the orange color, adjust the blend mode. Second option, difference clouds, the filter, erase the parts you want erased, apply a layer effects style of "color overlay" to orange, maybe play with the blend modes as well.

Teach me how to create the opening "hallway" sequence using Adobe After Effects

I need to create a memorial video for a loved one that passed away. Can someone teach me how to create the opening "hallway" sequence using AE? here is the video from youtube: https://www.youtube.com/watch?v=4191kcW07f0 . Thanks

I'll give a very brief overview but, presuming that you are new to After Effects, understanding and executing on this overview will require learning the basics of After Effects.
You'll be creating a 3D scene based on a few 3D layers: one each for the floor and each wall. Each of those 3D layers will be a precomposition layer; the wall layer with the pictures will be based on a precomposition in which you have placed your pictures as individual layers. You will create some 3D lights shining down from above. You'll create a 3D camera that you will then animate to move down the hallway.
As I said, that is a very brief overview. Understanding each of those pieces will require some learning. After Effects is not a simple application, so you do need to be prepared to put in some learning time if you are going to do this yourself. Here is the place to start: http://adobe.ly/AE_basics
All that said, I would recommend that you hire someone to do this for you. Learning a new and complex creative application under the time pressure (and other pressure) that you are under may be too much to ask.

How to create the Over exposure wipe effect?

Films like The Secret produce a wipe effect of over exposed light emiting from the video as it transitions to the next shot. Any idea how to creat this effect?
Thx
Kevin

It can definitely play a factor. DVD has a little more leeway, and I've never seen an issue on my TV, but it's properly set up. For the typical viewer who probably has their brightness turned way up so they can watch TV in the afternoon with the sun shining right on the screen, the transitions will probably tear and distort.
I love the vapor across transition, but only use it for web based projects, and things I know that only I am going to be watching.

How to create the "300" Movie Effect in FCP

Would be eternally grateful if someone could tell me how to create the 300 movie look in Final Cut Pro. I've scoured the Interwebs for a tutorial with no luck.

I think it's not as hard as people think, it just looks intimidating because there are no popup windows. Everything in the interface is on the top of the rooms. Just think if FCP had things this way...
I learned to use color in a class in Cupertino (I'm a certified trainer in Color and FCP) but gotta say, it's just not "Mac-like" in it's interface. It was originally written for Unix as was Shake, so they look similar... but they really aren't that hard to learn. The certified training course in Color is only a 2 day affair. I could teach anybody color on a one on one in one day. Doesn't make them a colorist just as learning FCP doesn't make them an editor... but the buttons? yep 1 day.
FCPs full training is 8 days for full level 2 certification, and even then, it doesn't cover everything you could do in FCP...
I teach a 15 week course in FCP and STILL don't have time to teach it all. So what's easier to learn? Color.
Jerry

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to create the servlet as acontroller and how to use it

how to create the servlet as acontroller and how to use it

>
John
Please update your forum profile with a real handle instead of "914824".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
just wanted to know if its possible to do something like this in java.
Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons.

How to create the Paragraph styles in Smart Forms

Dear Techie's,
Please let me know, How to create the own Paragraph styles in Smart Forms i.e to make the line or a particular font in BOLD.
Please put the light ASAP.
Regards,
Maddu.

hi
good
You can create additional fonts and style with transaction SMARTSTYLES
This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form.
The character formats includes effects such as superscript, subscript, barcode and font attributes.
thanks
mrutyun^

Can anyone explain how to create this effect in Deamweaver and Fireworks?

This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
Joe

Thank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

How to create "Fisheye Effect" with Photoshop 10, on a Mac computer

How to create "Fisheye effect" with Photoshop 10 on a Mac computer?

One way : use the filter : correct camera distortion. Move the remove distortion slider towards left (barrel distortion)
Or, first increase the canvas size to a square format bigger than the larger dimension of the image and play with the filter : distort, spherize.

How to create the logical file name

Hi All,
    I have requirement where i need to post the Inventory Management data. for this i need to execute std. program RM07MMBL which is having logical file name in the selection screen. but i have placed my input file in application server.
   Can any one tell how to create the Logical filename which refers the physical path. I also tried <b>t-code SF01 & Table - FILENAMEC</b>I and found that we need to add an entry in this table but i really dont know how we have to do since this table cannot be maintained in SM30 also..
Help Me.
Thanks in Advance!...
Regards,
Ramkumar

Hi Ram,
Try using FILE transaction code...
Follow these steps to create:::
Double click on Logical file Path Definition
Click on New Entries,
Give Logical file Path name as Z_LOGICAL PATH and save it
now choose this path and double click on Assignemt of Physical path to Logical path
double click on the OS name
Give some description and give some Physical path name from AL11 transaction and save it
Now Double click on Logical File Name Definition,
Click on New Entries,
Give some logical file name: Z_LOGICAL_FILENAME
Physical file: test
Data Format: BIN
Logical Path: Z_LOGICAL PATH
Hope this helps
Regards,
Phani
Message was edited by:
        Sivapuram Phani Kumar

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the Web application designer

Hello BW Guru's,
how to create the WAD... step by step procedure and where to save the report and how to excute the report.
please send as soon as possible.
Thanks
Sudha

hi,
you can also refer to the following links.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f11a7e3-0601-0010-52a2-c3fbbdb068da
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078 [original link is broken]
hope it helps,
regards,
Parth.

How to create the effect of a face pushing through a wall?

Similar Messages

Maybe you are looking for