HOW TO Create  variants for transaction MASS on LFA1 object?

hOW TO Create  variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable  in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

Similar Messages

  • How to create variant for selection screen which is in subscreen

    Hi,
    How to create variant for selection screen which is in subscreen in a module pool program?
    it is very urgent.
    Thanks in advance.

    Hi,
    You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
    To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
    Regards
    Sudheer

  • How to create variant for table/view ?

    Hi,
    When I go through SM30, I find a radio button called variant. I don't know the effect.
    Can anyone tell me how to create variant for table / view ?
    I want to know when we need to create variant for table/view.
    Best regards,
    Chris Gu

    hi ,
    Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
    For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
    If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
    Procedure
    To create a new variant:
           1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
           2.      On the variant maintenance initial screen, enter the name of the variant to be created.
    Note the naming convention for variants (see below).
           3.      Choose Create.
    If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
           4.      If there is more than one selection screen, select the screens for which you want to create the variant
    5.      Choose Continue.
    The (first) selection screen for the report appears.
    If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
           6.      Enter the desired selection values, including multiple selection and dynamic selection.
           7.      Choose Continue.

  • How to create varient for transaction code

    hello expert,
    I created one Mod. pool program and transaction code.
    while run this tcode, Save button is disable and unable to create varient.
    could you please guide me hw to enable this save button and create varient. please
    with best regards
    srinivas

    Hi,
    You can create variants for transaction using transaction variants. That is meant to simplify these kinda scenarios.
    The tcode for transaction variants is SHD0. You can create variants as you wish. It is simple only. No coding required. Just take SHD0. Give your transaction name.
    Then press create variant.
    It will guide you.
    Regards,
    Renjith Michael.

  • Delete Variants for Transaction MASS

    Is it possible to delete multiple variants for transaction MASS?
    I am aware variants can be deleted one by one using Goto... Variants... Delete. However, I would like to delete over 200 variants which are no longer required.
    Surely there is a standard function? Deleting hundreds of variants one at a time is not an option. Contracting an ABAP programmer is not an option.
    Thanks for your advice.

    Hi G. Lakshmipathi,
    Your suggestion to use BDC recording worked like a charm.
    However, I am still surprised that there is no standard function.
    Thanks for your help.
    Regards,
    Nathan

  • Reg: How to create Variants for program SAPF120

    Hi SAP gurus,
    How to create variants for programm SAPF 120.
    with regards
    JK rao

    Hi,
    I suppose you intend to include 22 more Recurring Documents in the F.14 screen in an existing variant. Please check if these 22 are Recurring Docs in FBD3. And make sure that all 48 are appearing in the Document Number (Multiple Selection) tab of F.14. You can test (in a test system) by executing after inclusion and not necessarily saving as variant to make sure that BI session includes all 48 docs.
    Rgds.

  • How to create Variant for braodcasting in BI 7.0

    Hi,
    As we create variants in BW 3.x using table TVARVC and
    t-code STVARV to enter variable to be updated as per requirement and a code for the same.
    And we will get variant in selection screen of report with updated values.
    Can some one tell me how can we do the same in BI 7.0?
    Please reply soon.
    Thanks.
    Santosh

    In the old SAP BW 3.5 version, we used a program that runs everyday after midnite that sets date variables in TVARVC.  The end user could specify which variable from TVARVC to fill the data field in the variant.  We have the user save the workbook and then distribute it via the Web Broadcaster.
    The workbooks are sent via email if things work OK.
    Are you saying we can do something similar using RSRVARIANT?  If we insert a row into RSRVARIANT, will the user be able to replace a field in their variant with the value?
    Here are some of our variables in TVARVC:
    Table:          TVARVC                                                   
    Displayed Fields:   9 of   9  Fixed Columns:                 4  List Width
                                                                                    MANDT NAME                           TYPE NUMB SIGN OPTI LOW                                                                               
    010   Z_PRIOR_FISCAL_PERIOD          P    0000           10/2005      
       010   Z_PRIOR_FISCAL_PERIOD          S    0000 I    EQ   10/2005      
       010   Z_PRIOR_WEEKLY_PERIOD          P    0000           43/2005      
       010   Z_PRIOR_WEEKLY_PERIOD          S    0000 I    EQ   43/2005                                                                               
    This would be for the October 2005 time frame.  In November the Z_PRIOR_FISCAL_PERIOD
    would get bumped up to 11/2005 which would have been November 2005.
    We have a batch procedure that updates the values in TVARVC table.  The user
    can choose with date value to run with.  In the old version everytime the variant
    is accessed, the current value of the variable Z_PRIOR_FISCAL_PERIOD would be fetched,
    so this is the way we could have monthly and weekly batch jobs run for precalculation
    and not get the same date range over and over again.
    How can be give the user an option to choose a variable like the above?
    Do we need to use Microsoft Excel VBA to call SAP BW to call custom code?
    Yes, we can update rsvariant table contents with a program.  But how will we "know"
    which date range the user wants unless they can choose which variable they want to use?
    Has anyone been able to do this?
    Thanks,
    Chris

  • How to create variants for a sequence-f​ile?

    Hello,
    i have a testplan with custom teststeps. Each step has a new field with type "container" and name "myData",
    Inside of this container are numeric, string and bool parameter. The parameter inside this container are used to execute
    the teststep.
    I attached an example of this, if you open the right side of the sequence then the container "myData" can be seen.
    No i want to use the testplan for two different products, that means different parameters.
    Is the only thing that is included in teststand, the property-loader? If yes, can someone give me an example of how to
    use to property loader with my attached sequence?
    As far as i understand it, i have to create to different text files where i specify for each step-name the parameters.
    Does that mean when my testplan contains >1000 teststaps, that i have to create that manually by hand, or is there a function
    to export everything into a file (all parameters, skips, loop, ...)?
    I´m using TS 3.5 with LV 8.2
    Thanks for your help
    Message Edited by OnlyOne on 11-05-2007 07:29 AM
    Attachments:
    seq1.seq ‏21 KB

    Hey OnlyOne,
    Sounds like the perfect opportunity to tell you about this cool new feature in TS 4.0.  You can select multiple steps and change the same property for all selected steps in one swoop.  Finally!!!  I added five of your custom steps and tested it just to make sure.  And it works.
    However, if you can't afford to upgrade or you like 3.5 better then the best way is to use the Import/Export Properties Tool.  Look in the Tools menu and you'll see it there.  Tools>>Import/Export Properties.  It's basically the same thing as the Property Loader step except you can go both directions instead of only being able to read values from a file.  You can write the file with it!! In fact what most developers do is use the tool to create the file.  Copy the file multiple times and change the values in each file.  Then use the Property Loader step to dynamically read the different files for their tests. 
    The Property Loader step is dynamic as the Import/Export Properties tool is only during development.
    As for an example for the Property Loader: C:\Program Files\National Instruments\TestStand 3.5\Examples\LoadingLimits  That contains a couple examples from Excel, Txt and other file formats.
    Hope that helps some,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How to create variant for HIER reports

    Hello,
    I have to run program RKDBAT02(Background Processing for Drilldown Reports) from a FM that i created.
    i have to run this program with a variant that i need to update with the values from my FM.
    My problem is tha I am trying to use the regular variants FM as RS_VARIANT_VALUES_TECH_DATA to get the variants
    fields that i have to load or fm RS_CREATE_VARIANT and in the parameter report name i put the HIER report name.
    I keep getting an error that this is not a report. I can put the program hier report name which is a long string,
    but the string name change dynamically between clients.
    I need a way to load the variant of the hier report .
    TNX
    Yifat

    fill in the values in the selection screen and then hit the save as button.
    give it a name, enter. the variant is now save.
    M.

  • Creating Variant for VA05???

    Hi SAPians,
    Could you please give me the step by step process on how to create variant for VA05 for column layout.
    Thanks in advance
    MM.

    hello, friend.
    first, execute VA05.  customize your layout by clicking on the "current" icon.
    next, save your layout by going SETTINGS > DISPLAY VARIANTS > SAVE.  please note that unless your user parameters include the appropriate profile, the "save" option remains greyed out and unavailable.  ask your BASIS consultant to assign you parameter = SD_VARIANT_MAINTAIN with value "A".  then you can save your own variant.
    regards.
    p.s.
    i got this idea from someone else.  i think it was lakshmipathi.  whoever it was, thanks.

  • How to created exit for CS02 transaction to maintain bom details of a mater

    hi ,
         plz explain how to created exit for CS02 transaction to maintain BOM details of a material. what is the BOM component . give me sample example.

    Hi,
    these are the user-exits for CS02
    Transaction Code - CS02                     Change Material BOM
    Exit Name           Description
    PCSD0001            Applications development R/3 BOMS
    PCSD0002            BOMs: Customer fields in item
    PCSD0003            BOMs: Customer fields in header
    PCSD0004            BOM comparison
    PCSD0005            BOMs: component check for material items
    PCSD0006            Mass changes user exit
    PCSD0007            Check changes in STKO
    PCSD0008            WBS BOM: Customer-specific explosion for creating
    PCSD0009            Order/WBS BOM, determine URL page
    PCSD0010            Order/WBS BOM, determine explosion date
    PCSD0011            Knowledge-based order BOM, parallel update
    PCSD0012            Customer - Mat. number/mat. number during material exchange
    PCSD0013            Customer-specific processing of an explosion for BOM browser
    Regards
    Nilesh

  • How to create F4 for the standard transaction

    Hi all ,
    How to create F4 for the standard transaction for a particular field .
    Bye

    Santosh,
        You can create F4 values for a field in a standard Transaction .
    1. First search for a standard search help meeting your requirement .
    2. If you don't find one, create your own custom (z) serach help .
    ( 1 is preferable )
    After that, include that serch help to the standard field in the transaction .
    For this u need to go to the screen
    ( F1->F9-> screen-> Field )
    Click on the property of the field and include the search help .
    You ll require the access key from the basisi guys as u r changing standard .
    Hope it helps,
    ~ laxmi
    Reward for helpful answers

  • How to create Variant file for ECATT(MM01)?

    Any one know how to create variant file for ECATT (MM01)

    Hello TJK,
    What do you mean by variant file? Please give some more details.
    Meanwhile here is the link on how to use eCATT,
    New to Materials Management / Warehouse Management?
    Hope this helps.
    Regards
    Arif Mansuri

  • How to create infopackage for Cube to Cune to transaction

    HI Experts
    I have performed following steps for cube to cube load.
    1. Created source cube and loaded the data from R3
    2. Created Destination cube
    3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
    4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
    5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource.  its not showing up any name with 8ZFIGL_C01.
    Kindly let me know how to create infopackage for this to laod the data from cube to cube.
    Additional information:
    I have set the optopn Display Generated Object in Settings.
    Thanks in advance for your help.
    Regards
    NLN

    Hi,
    Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
    See solution from SAT:
    Problems with Infosource Data Marts
    Best regards,
    Frank

  • How to create new RF transaction in R/3?

    Hi Guys,
    Can anyone tell me how to create new RF transaction In WM. If possible step by step.
    Thanks heeps.
    Narahari

    Hi again,
    well if you need it for an infoObject ZMATERIAL,
    Create the infoObject ZMATERIAL with reference to 0MATERIAL and you will have all 0MATERIAL hierarchies available for ZMATERIAL.
    Nothing additional necessary.
    The creation of similar Hierarchy-Extractors in R/3 is, as far as i know, not possible.
    The proper order for the FF-Elements when uploading the self-defined hierarchy depends on the hierarchy-settings in the DataSource, for instance for sorted hierarchies:
    Node ID     NODEID     NUMC     8
    InfoObject Name     INFOOBJECT     CHAR     30
    Node Name     NODENAME     CHAR     32
    Link Name     LINK     CHAR     1
    Parent Node     PARENTID     NUMC     8
    First Subnode     CHILDID     NUMC     8
    Next Node Along     NEXTID     NUMC     8
    Language Key     LANGU     CHAR     1
    Description - Short     TXTSH     CHAR     20
    Description - Medium     TXTMD     CHAR     40
    Description - Long     TXTLG     CHAR     60
    Look also for the Function module for the FTP in se38 by FTP.
    hth
    cheers
    sven

Maybe you are looking for

  • Authenication needed when moving or saving files to a folder

    I've been online searching but can't find a resolution to disabling having to authenticate when moving or saving files to any folder. I read something about using Terminal and tried the suggestion which was typing in sudo chawn -R yourshortname . The

  • Strange letters and numbers in bookmark titles after convert .doc to .pdf.

    Hello everyone! After comverting my Word document to a PDF, some of the bookmark titles now have "5T" or "6T" added to random places. Here's a screen shot. See the entry "capitolo" there is a "5T" added before, which isn't present in my word file. I'

  • Deprecation error

    entry settled through transaction code aiab the amount is Rs.5000/- i notice that ordinary deprecation pass is amount 5001 how is it possible? now i want to reveres that document for wrong deprecation amount 5001/- how can i reveres the entry. please

  • Help needed for Audigy and Audigy 2

    Hi, I got a set of Audigy Platinum EX and I have a Audigy 2 ZS. Can I use the external I/o part of Audigy Platinum EX on Audigy 2 ZS?Thanks

  • Mavericks Outlook 2011 Password Prompt (Solution)

    I have a Macbook Pro running Mavericks.  Outlook 2011 kept pushing the password prompt to the screen.  I have searched and searched for a solution.  I have seen the following solutions offered: Issues with Keychain corruption Outlook autodiscovery De