How to create Web service proxy in Eclipse?

Hi,
I want to create web service proxy in Eclipse. Can someone tell me what all plug ins are needed for it and what is the detail procedure for the same?
Thanks in advance.

Proxy class is out of date now... proxy class only support stateful web service call... and stateful web service may became a big limitation in development.
Try to thinking about how to use stateless web service call, you may get an alternative solution.
Edited by: user13036981 on 2011-10-7 上午9:20

Similar Messages

How to create Web Service Proxy with help of WSDL.

Hi ,
How to create Web Service Proxy with help of WSDL .
Please help me .
Thanks in advacne for reply .

check out this article. It has all the details
http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html

How to update web service proxy in JDeveloper 10.1.3.0

hi all
I want to ask how to update web service proxy in JDeveloper 10.1.3.0?

What do you mean update?
You can go into the source code and update whatever you want.
If you mean that the WS spec has changed - then you can either change the proxy manually, or create another proxy.

How to create web service client

Hi All,
I am new to web services .Can any body explain how to create web service client ....
Please give the give the discription step wise.
Thanx
Arun

Hi Krishna,
Yes it is possible.
Check this Link
[JDeveloper Web Service|http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2]
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2
I strongly suggest you to go for Eclipse, instead of Netbeans or Jdeveloper incase of WebService. If you want to run your code in all the Server without making any changes go for Eclipse based development for Web Service.
Kindly let me know if you need some more inputs.
Regards,
Zack

Validation error while creating Web Service Proxy.

Hi,
I'm trying to create Web Service Proxy. But I'm stuck with a Validation error
model error: type
+"{http://xmlns.oracle.com/2001/XMLSchema/DOM}+
+org.w3c.dom.Document" not found.+
I'm using "Create Web Service Proxy" wizard. There are 6 steps in creating proxy through JDev. wizard.
First step itself displaying the above validation error when I click on "Next" button.
Few points
We have created web service using "oracle.j2ee.ws.StatelessJavaRpcWebService" servlet
Thanks in advance.
-Sukumar

Hi,
It might be that the .net service which you have is not WS-I compliant. Can you first run WS-I Analyzer on the wsdl to see it the test passes.
Thanks,
Vishal

How to create Web services to communicate InfoPath forms to Share Point lists ?

How to create Web services to communicate InfoPath forms to Share Point lists ?

Hi,
As per your posting and my understanding, you wanted to communicate your infopath with SharePoint list/library. Please refer the below link(s) which may help you to solve your issue.
http://blogs.msdn.com/b/russmax/archive/2012/08/17/want-to-call-sharepoint-2010-web-services-within-browser-based-infopath-2010-forms.aspx
http://jaliyaudagedara.blogspot.in/2011/03/submitting-data-to-sharepoint-2010-list.html
or
http://blogs.msdn.com/b/infopath/archive/2007/03/26/submitting-to-a-sharepoint-list.aspx
If you need more help please let usknow
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you
see a reply being an answer to the question of the thread, click "Mark As Answer

How to create web services in java?

Hi,
I am a newbie to java webservices. Can anybody tell me how to create web services in java?
Any tutorial link or step by step doc would be useful.
Appreciate your help in this regard.
Thanks in advance.
naymo01.

Creating web services in Java appears to depend highly upon the server you intend to use.
Here's a tutorial: http://java.sun.com/webservices/docs/1.6/tutorial/doc/index.html

How to create Web Service & Web Service Client on OCMS

Hi all,
Is anybody can show me how to create Web Service on OCMS?
I only know how to do it on WebLogic Server.
It has many differences between OCMS and WLS.
Thanks & Regards,
Jack.

Jack,
This tutorial can help:
http://www.oracle.com/technology/products/ocms/pdf/parlayxjdeveloper.pdf
Regards,
Adam

How to create Web Service as a source system in BI and configure a DS

Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AG

Hi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira.

Create Web Service Proxy - Union Schema Element has not been implemented

Create Web Service Proxy
Validation Failed:
WSDLException: faultCode=INVALID_WSDL: unsupported XML Schema feature(Union Schema Element has not been implemented)
WSDL source: http://personal.inet.fi/cool/sports/misc/FlatWSDL/SOAPFrontGetShowBalanceJMS.wsdl

Looks like this was a false alarm. There were some issues with the message schema.
Sorry for the confusion.

How to create Web Service based on PI WSDL message

Hi all,
we have following scenario:
Within PI (version 7.1) we set up a message type and inbound service interface. This service interface should send the PI message to a web service running on a SAP J2EE (version 7.01). As the PI message is sent as WSDL I thought it should be easy to build a web service on the SAP J2EE based on this WSDL from PI.
Unfortunately, I have problems creating the Web Service.
For my current project we integrated the NWDI to the SAP NetWeaver Developer Studio and I'm required to add the Web Service to an existing DC (Development Component) within the NWDI.
What I tried so far is:
- I created a Deployable Proxy Project and within this I created a Client Proxy Definition based on the WSDL from the PI. But I can't add this Proxy to the DCs of the NWDI and I don't know how to implement my own coding here in order execute specific functions.
- I created a new class within the NWDI DC and a public method. Based on this I created a Virtual Interface and a Web Service Definition (WSD). Then I added this to a Web Service Deployment Descriptor. I uploaded this to the SAP J2EE. But I'm not able to access this and I don't know hoe to assign the WSDL here.
I also tried here to create a client proxy based on this WSD as I thought I might assign the WSDL here. But I don't see the WSD in the list of Web Services uploaded to the SAP J2EE...
Can you please advice me how to create a Web Service in such an environment?
regards
René Jurmann

Hi Tahir,
sorry that you needed to wait this long - but this is how I created the web service:
The steps on how to create the web service in NetWeaver Developer studio are nearly the same as described in the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5838. [original link is broken] [original link is broken] [original link is broken]
Some steps I just skipped and some others I added. Some of the steps I did the way I described it as I needed to connect the web service with the SAP PI.
Prerequisites:
Add Java Perspective and J2EE Development Perspective to the open perspectives.
Within "Window - Preferences - Web Services" check "Soap extensions visible in the virtual interface editor"
The SDM of the corresponding SAP J2EE is configured within "Window - Preferences"
Create a Development Component (DC) with type "J2EE -> EJB Module"
The business logic of the web service will be implemented in an Enterprise Java Bean (EJB). So first the EJB component must be created:
     Choose "File -> New -> Other"
     In opening PopUp choose "Development Component -> Development Component Project"
     Select the Software Component for which you want to add the DC (e.g. "Local Development -> MyComponents")
     Choose now vendor, name and type:
          vendor is an alpha-numeric string of 20 characters starting with a letter - all in lower case
          name is an alpha-numeric string starting with a letter - all in lower case
          vendor and name concatenated must not be longer then 40 characters
          the name can be separated into different part using "/" as separator
          each part of the name must not be longer than 8 characters
          the type is "J2EE - EJB Module"
          you can specify a Caption as general description for the web service
Create new EJB
To create the EJB itself:
     In J2EE DC Explorer of J2EE Development Perspective expand new DC and right-click on folder "ejbModule"
     Choose "New - EJB" with following details:
          EJB Name: <name as for PI service Interface to be created - starting in upper case>
          EJB Project: <pre selected>
          Bean Type: Stateless Session Bean
          Default EJB Package: <corresponds to namespace in PI>
          generate default interfaces: Checked
Regarding the "Default EJB Package" this should be created according the namespace in PI for which all PI objects will be created. This only applies if you have some naming conventions here.
Example:
Namespace in PI is: http://company.net/pi/SOFTWARE_COMP/Application
The corresponding package then is: net.company.pi.software_comp.application
Implement coding for web service
As the web service will be called via PI some transfer variables will be submitted. Most likely, those variables will not be standard type (e.g. String) but a complex type. Those types must be generated as Java classes. Below an example of a complex type I needed:
Data Type
net.company.pi.software_comp.application.types.MessageProcessingInformation
Structure:
     Element name          Element type
     sendingSystemID          String
     interfaceID               String
     businessProcessVariantCode     String
     testIndicator               Boolean
For every element described a public "get", "set" and "has" method must be created in the corresponding Java class:
package net.company.pi.software_comp.application.types;
import java.io.Serializable;
public class MessageProcessingInformation implements Serializable {
     protected String sendingSystemID;
     protected String interfaceID;
     protected String businessProcessVariantCode;
     protected Boolean testIndicator;
     public String getSendingSystemID() {
          return sendingSystemID;
     public void setSendingSystemID(String value) {
          this.sendingSystemID = value;
     public boolean hasSendingSystemID() {
          if(sendingSystemID != null && !sendingSystemID.equals("")){
               return true;
          return false;
All Java classes representing complex types and all classes referenced here (used for sub-types) must implement java.io.Serializable. Java standard types which do not implement this class must not be used as sub-types.
As soon as all data types are declared the real business logic can be implemented:
     In J2EE DC Explorer of J2EE Development Perspective expand DC - "ejb-jar.xml" - <Name> and double click on "ejbCreate"
     In detail view select folder "Business Methods" and click "Add"
     choose name of business method - this should be the same as the PI message type used for the service interface - starting lower case
     return type should be "void"
     add needed parameters fully qualified - including package (as specified in PI and created previously in DC)
     you can mark certain parameters as array if necessary
Remark:
It might be that after saving you get an error. This might be as the package name of one component is copied to the corresponding Java class at the very beginning (before the package declaration within the Java class). Simply delete the string here.
It also might be, that the new business method is only defined in the remote interface class but not in the bean class. Just create an according method in the bean class.
Within the newly created business method within the bean class you can now implement the business logic.
Create a DC with type "J2EE -> Enterprise Application"
In order to create the "real" web service and deploy it to the J2EE an Enterprise Application project has to be created. So create a new DC as for the EJB Module but choose as type "J2EE -> Enterprise Application".
After the DC is created right click on the EJB DC and choose "Add to EAR Project". Choose the new DC.
Create web service for EJB
As soon as you implemented the business logic you can create the "real" web service. Therefore:
     Right click on the EJB name below "ejb-jar.xml"
     Choose "New - Web Service"
     Choose proper "Web Service Name" and "Configuration Name" (probably oriented at the EJB name)
     Copy the URL of the web service - you'll need it later for PI configuration
     on the second next screen use the same name for "Virtual Interface" and "Web Service Definition" (the name should be the name of the "Endpoint")
     the "EAR Project" should be preselected
Unfortunately, the web service can't be used in its current configuration to be accessed by PI. Therefore the Virtual Interface must be changed. To do so, expand folder "Virtual Interfaces" and double click the virtual interface created.
Within the detail view expand in tabs "Mapping" and "Types" the complete folder structure. For any "SOAP Extension" where a namespace can be defined use as namespace the corresponding namespace in PI (e.g. http://corpintra.net/pi/CBFC_GLOBAL_SAP_APPL/BillerDirect) but do not change any "Soap Extension" of a standard Java type. (if you don't have any naming convetions for namespaces in PI you can leave the SOAP Extension here. But then the namespace in PI should be set accordingly.)
Probably it can be necessary on top level "Soap Extensions" in tab "Mapping" to leave "Use Namespaces for Parameters" unchecked. For some of my web services this parameter must be checked for others not - just try.
If you can define a "New Name", "Local Name" or "Item Label" for a Soap Extension then use a name with starting upper case letter. (For Java Naming conventions most of the data type names will start with lower case letters.) Especially the method name must be renamed this way in order to stick to the PI namings.
As a last point to change here check in tab "Mapping" all "Incoming Parameters" which you specified as array. Use for those as "New Name" a different name - do not just simply change from lower case to upper case. This is necessary as on PI we need to create two levels although here only one is specified.
For any own sub-type declared as array the name within the coding should also differ from the corresponding Java Class name the type refers to.
If all this is done you can deploy the web service to the J2EE:
     right click on "Enterprise Application" DC and choose "Development Component - Build..." and build all corresponding components
     right click on "Enterprise Application" DC and choose "Development Component - Deploy"
Test the new web service via <J2EE URL>/wsnavigator/enterwsdl.html
Create PI interface
After the web service is created successfully the PI integration can be started.
Therefore, within the Enterprise Services Builder create a data type according to the web service definition. All components defined on top-level for this data type should be declared as incoming parameter for the web service business method. Therefore it could be necessary to create some sub data types on PI first and add those to the "master" data type.
Ensure that the names of the components correspond to the names defined in the web service (see virtual interface here). Those names must exactly be the same - including lower/upper case. Also take care for the ordering of the components.
In case you need to include arrays following applies:
The upper level is of occurrence "1:1". This has only one sub-entry with occurrence "1:n". The names for upper and sub-level must not equal.
Based on the data type a message type is created. The name of the message type must be exactly the same as the name of the web service business method. (Hint: the name of the web service business method was most likely changed in the virtual interface. Then this name must correspond to the message type name.) Based on the message type an asynchronous inbound interface is to be created (which will be referred in the Integration Directory). The operation name for this interface (left panel) should be the same as the name for the web service business method.
Create PI mappings and routings
How to map (message mapping and operation mapping) from source to the web service message I wont explain here as this depends on the source message. The only important things here are:
     When creating the SOAP communication channel within the Integration Builder the "Target URL" is:
          <J2EE URL>/<Access URL as specified in web service creation>?wsdl&style=document
     The soap action is the name of the web service business method.
     Most likely the web service needs authentication to be executed.

Problem while creating web service proxy in Jdeveloper 10.1.3

I am using Jdeveloper 10.1.3 to create a web service proxy so that I can track my request/response in HTTP Analyzer.
I am following the steps as mentioned in the follwoing uRL:
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
But I get the following warning while creating the web servcice proxy:
Generating proxy
WARNING: value type package prefix is ignored for the types defined in the schema that has same target namespace as the target namespace of wsdl: <my web service namepsace>
Proxy generation finished
After adding my code in the main methoad of proxy, I get the following error while compiling:
WARNING: Unable to connect to URL: <my web service proxy URL> due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
Please help as how to solve this.
Edited by: user11258855 on 02-Jul-2009 03:38

I am using Jdeveloper 10.1.3 to create a web service proxy so that I can track my request/response in HTTP Analyzer.
I am following the steps as mentioned in the follwoing uRL:
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
But I get the following warning while creating the web servcice proxy:
Generating proxy
WARNING: value type package prefix is ignored for the types defined in the schema that has same target namespace as the target namespace of wsdl: <my web service namepsace>
Proxy generation finished
After adding my code in the main methoad of proxy, I get the following error while compiling:
WARNING: Unable to connect to URL: <my web service proxy URL> due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect
Please help as how to solve this.
Edited by: user11258855 on 02-Jul-2009 03:38

Error creating web service proxy for bpel process in jdev 10.1.3

Hi,
I am trying to create a web service proxy in Jdeveloper 10.1.3, and get the following error:
Element type "fault" is missing required attribute "name"
I have created a fault on one of the operations, and in the .wsdl file there is a name attribute:
<operation name="process">
<fault name="TestError" message="client:TestErrorMessage"/>
</operation>
The fault definition in the .wsdl obtained from the process when you access it over http is somewhat different:
<fault>
<soap:fault name="TestError" use="literal" encodingStyle="" />
</fault>
Any ideas how to workaround this problem?
Toby

Hi Susan,
The WSDL generated by BPEL designer is :
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="EncryptedPasswordTest"
targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema attributeFormDefault="qualified"
               elementFormDefault="qualified"
               targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
               xmlns="http://www.w3.org/2001/XMLSchema">
               <element name="EncryptedPasswordTestProcessRequest">
                    <complexType>
                         <sequence>
                              <element name="username" type="string"/>
                         </sequence>
                    </complexType>
               </element>
               <element name="EncryptedPasswordTestProcessResponse">
                    <complexType>
                         <sequence>
                              <element name="password" type="string"/>
                         </sequence>
                    </complexType>
               </element>
               <element name="EncryptedPasswordTestProcessError">
                    <complexType>
                         <sequence>
                              <element name="code" type="string"/>
                              <element name="description" type="string"/>
                         </sequence>
                    </complexType>
               </element>
          </schema>
     </types>
     
     <message name="EncryptedPasswordTestRequestMessage">
          <part name="payload" element="client:EncryptedPasswordTestProcessRequest"/>
     </message>
     <message name="EncryptedPasswordTestResponseMessage">
          <part name="payload" element="client:EncryptedPasswordTestProcessResponse"/>
     </message>
     <message name="EncryptedPasswordTestErrorMessage">
          <part name="payload" element="client:EncryptedPasswordTestProcessError"/>
     </message>
     
     
     <portType name="EncryptedPasswordTest">
          <operation name="process">
               <input message="client:EncryptedPasswordTestRequestMessage" />
               <output message="client:EncryptedPasswordTestResponseMessage"/>
<fault name="EncryptedPasswordTestError" message="client:EncryptedPasswordTestErrorMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="EncryptedPasswordTest">
          <plnk:role name="EncryptedPasswordTestProvider">
               <plnk:portType name="client:EncryptedPasswordTest"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>
And the WSDL produced when you access the ws endpoint is:
<?xml version="1.0" encoding="UTF-8"?>
<definitions
name="EncryptedPasswordTest"
targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:client="http://xmlns.oracle.com/EncryptedPasswordTest"
>
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/EncryptedPasswordTest"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="EncryptedPasswordTestProcessRequest">
<complexType>
<sequence>
<element name="username" type="string"/>
</sequence>
</complexType>
</element>
<element name="EncryptedPasswordTestProcessResponse">
<complexType>
<sequence>
<element name="password" type="string"/>
</sequence>
</complexType>
</element>
<element name="EncryptedPasswordTestProcessError">
<complexType>
<sequence>
<element name="code" type="string"/>
<element name="description" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>
<message name="EncryptedPasswordTestErrorMessage">
<part name="payload" element="tns:EncryptedPasswordTestProcessError"/>
</message>
<message name="EncryptedPasswordTestResponseMessage">
<part name="payload" element="tns:EncryptedPasswordTestProcessResponse"/>
</message>
<message name="EncryptedPasswordTestRequestMessage">
<part name="payload" element="tns:EncryptedPasswordTestProcessRequest"/>
</message>
<portType name="EncryptedPasswordTest">
<operation name="process">
<input message="tns:EncryptedPasswordTestRequestMessage"/>
<output message="tns:EncryptedPasswordTestResponseMessage"/>
<fault name="EncryptedPasswordTestError" message="tns:EncryptedPasswordTestErrorMessage"/>
</operation>
</portType>
<binding name="EncryptedPasswordTestBinding" type="tns:EncryptedPasswordTest">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="process">
<soap:operation style="document" soapAction="process"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault>
<soap:fault name="EncryptedPasswordTestError" use="literal" encodingStyle=""/>
</fault>
</operation>
</binding>
<service name="EncryptedPasswordTest">
<port name="EncryptedPasswordTestPort" binding="tns:EncryptedPasswordTestBinding">
<soap:address location="http://bpel5.lon.domroot.com:7779/orabpel/default/EncryptedPasswordTest/1.0"/>
</port>
</service>
<plnk:partnerLinkType name="EncryptedPasswordTest">
<plnk:role name="EncryptedPasswordTestProvider">
<plnk:portType name="tns:EncryptedPasswordTest"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>

How to create web service manually in APEX?

When I try to create a web service from wsdl, I get error: "The WSDL document could not be understood by the rendering engine".
I have found no APEX documentation about how to fill data when creating web service manually. I have wsdl file (have put wsdl url into browser and got contents), but don't know what to do with this beast.
Anyone knows what to do?
Igor

Proxy class is out of date now... proxy class only support stateful web service call... and stateful web service may became a big limitation in development.
Try to thinking about how to use stateless web service call, you may get an alternative solution.
Edited by: user13036981 on 2011-10-7 上午9:20

Error Creating Web Service Proxy in JDeveloper wizard

Hi,
I'm trying to create a Web Service Proxy from a WDSL file with JDeveloper wizards, the problem is when i click Finish in the last step an exception occurs.
java.lang.NullPointerException
     at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.getProxyAlreadyInProject(WebServiceProxy.java:1593)
     at oracle.jdeveloper.webservices.model.proxy.ProxyWarningChecker.getWarnings(ProxyWarningChecker.java:101)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.common.WarningCommitListener.checkCommit(WarningCommitListener.java:102)
     at oracle.ide.wizard.FSMWizard.finishImpl(FSMWizard.java:295)
     at oracle.ide.wizard.FSMWizard.mav$finishImpl(FSMWizard.java:54)
     at oracle.ide.wizard.FSMWizard$1.run(FSMWizard.java:271)
     at oracle.ide.util.IdeUtil.invokeAfterRepaint(IdeUtil.java:1093)
     at oracle.ide.wizard.FSMWizard.doFinish(FSMWizard.java:269)
     at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:51)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.ProxyWizard.runWizard(ProxyWizard.java:321)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.ProxyGalleryWizard.invoke(ProxyGalleryWizard.java:82)
     at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:310)
     at oracle.ide.wizard.WizardManager$2.run(WizardManager.java:358)
     at oracle.ide.util.IdeUtil.invokeAfterRepaint(IdeUtil.java:1093)
     at oracle.ide.wizard.WizardManager$1.run(WizardManager.java:366)
     at oracle.ide.util.IdeUtil$1$1.run(IdeUtil.java:1073)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
The JDeveloper version i'm using is 10.1.3.0.4.
Does anybody knows how to fix this problem?
Thanks,
Nuno

Yes, i have created a fault on one of the operations, however in the .wsdl file it does have a name attribute.
<operation name="process">
<fault name="TestError" message="client:TestErrorMessage"/>
</operation>
The fault definition in the .wsdl obtained from the process when you access it over http is somewhat different:
<fault>
<soap:fault name="TestError" use="literal" encodingStyle="" />
</fault>
Toby

How to create Web service proxy in Eclipse?

Similar Messages

Maybe you are looking for