How to crop 204 x 360 from 1280 x 1080?

I am using Compressor to set up to crop the video. The crop not show the size I want. Crop custom left and right and top and bottom. I want to get specific size to 204 x 360. How?

Load your clip into the Browser in Compressor.
Make copy of a standard preset that has the format you wish (or start from scratch)
Go to Inspector > Geometry pane > Custom
Put in the number of pixels you wish to crop from each side/ top and bottom to get the 204x360 image from the original.
Go to Dimensions (next box down) and change the frame size to 204x360 custom / square
Save the preset
apply it to the clip and take a look in the Preview window to see if it does what you want.
If it needs tweeking, open up the preset in Inspector and make changes,
Once it is cropping correctly, run compressor.
x

Similar Messages

How to crop and delete a piece from a phot

How to crop and remove some part of a photo

You can use the crop tool for that, assuming you want to take a slice off it.
(in my menu it is listed above the eyedropper tool, or you could just press C)
You can then drag the box edges to fit the selection you want to keep.
To be more precise, turn off snapping by unchecking snap at View > Snap
If this does not do what you want, it would be handy if you added an image and description of what you want to change.

How can I make different catalogs from the same image

How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.

Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia

How can I change a document from booklet to single pages

How can I change a document from booklet to single pages?

Very cumbersome.
How many pages?
Make a copy first.
In Acrobat use the Crop tool to crop half the width. (Pages > Crop Pages.)
For 11x17 to 8.5 x11 crop all even pages 8.5 left, all odd pages 8.5 right.
Do you have InDesign?
Create a new document correct to finished page size.
(Use Import Multi Page script to) Place all pages offset by the proper page amount.
Export new pdf.

How can I transfer outlook data from Ipod to new hard drive?

My hard drive had to be replaced last week. Although my music was backed up by Norton 360, my Outlook contacts and calendar were not backed up. How can I transfer my data from my Ipod to my new hard drive? I am running Windowa XP, if that matters. Will a sync to Itunes destroy all my data on my Ipod?

You would need to enter at least one unique contact and calendar entry on the new computer, then when you first sync you should get the option to merge the data.

How can I delete an attachment from a received email but save the message?

Hi all, how can I delete an attachment from a received email but save the message?*

Over the years this issue crops up again and again. Here are the cases I know about:
Case 1 - it simply doesn't work
I have a message in my inbox with a jpeg of about 300Mb. Select message, choose option "remove attachment" which is not greyed out, and it does not work.
Case 2 - it works if you save the message first
I move the message from the inbox to a mail box. Open the mailbox (select), select the message, choose option "remove attachment", result: the attachment is removed, a small text file is added and an error appears in the message "missing plug-in". The message size is reduced from 300Mb to a few bytes.
Case 3 - the option "remove attachment" is greyed out.
I've googled this at least 10 times and read all the advice about editing various files from the library and all the other hacks. The simple truth here is that the user should not be inconvenienced by such inappropriate behaviour. We're not used to this from Apple any more, not since OS X. Even Windows does this stuff painlessly. In fact this kind of function is something that Outlook and Exchange do incredibly well. If they didn't the corporate world would have ground to a halt.
My point: the remove attachment option should work all the time and should be redesigned. Right-click + save as + delete in the message would be a hundred times easier.

How do I create a pdf from an xps doc?

How do I create a pdf from an xps doc?

You could open it in the XPS application and check print preview to see if it comes out as TSN suggests (and likely will). You can go to the printer properties and adjust the page size accordingly.
You can also use the cropping in Acrobat to size all the pages and then use the Protect>Remove Hidden option to remove the cropped area.

How do i remove camera flash from eye glasses?

How do i remove camera flash from a eye glasses?

You can't remove anything from a 2D image. You can only add.
What is cropping or erasing then?

Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?

Do anybody know how to change a PNG file from 1760 width by 1369 height to 800 x 600?

Crop to 4x3 aspect ratio, then resize to 800x600

How to Crop an .AVI media in PP CS4 if possible at all.

Yes I'd like to know how to crop an AVI clip" I googled the question and got a lot of photoshop answers instead. What I wanted to do is, using an original clip get 2 short portions of it. that is of two different people jumping out of a plane and have them both spinning inversely 360 degree to the length of a song. I did it but was annoyed with the black edges on either side of the clips, especially interfering with the spinning of each clips (BTW I did export these two short clips after fitting them to the frame in a new sequence but the result is still the same, I hoped the new avi would not have the black edges, but it did not work!) I even would have preferred my two clips to be square for better visual balance but was unable to do this either. This may be a kind of picture in picture or in this case two pics in one. Thank you in advance for any tips

In the Effects Panel (not the Effects Control Panel), there is a little query box. Just type "crop," and it would have popped up - just do not forget to clear that query box, of you will not see your other Effects.
As for a Google search, I would have done advanced, with the string "Adobe Premiere Pro" and then the word "crop" and "effect" above.
THIS is the second hit, with about the same, but for CS3, that I got. Cropping is more commonly used in still Image editing, such as with PS, so most hits on "crop" will probably throws 1000's of PS references. By putting in that string, where all words are kept together and in order, we eliminated nearly all of those.
Good luck,
Hunt

How to crop a video clip for subsequent animation

I have several video clips that I'd like to crop (either with Motion or FCE 3.5) and then animate using Motion, but I'm not sure how to approach the problem.
Specifically, the clips in question are interviews, and my intent is to crop out extra background from them, then have them rotate into view one by one, along with animated pull-quote text, to produce a flowing narrative. I don't want the full-sized clips to be animated--just the relevant head-centered portions.
I'm a quick learner, so I don't necessarily need a step-by-step solution, but any tips to get me started would be appreciated.
Thanks!

There are several ways you could do this
-Crop the media (Set the cropping for the source clip, available in the media tab and Inspector.)
-Crop the layer (crop each instance of the clip in the project. Found in the layer properties).
-Apply a layer mask
-Apply a matte layer.
If you only need to set the cropping once, I'd recommend the first option. When you crop the media the center point is always maintained based on the cropping. If you crop using any of the other methods you may have to adjust the anchor point (center) of the layer.

How can i get all values from jtable with out selecting?

i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
raja

You could set the table's data model to be the same:
output2.setModel( output1.getModel() );

Discoverer Report: How to find Business Area name from Report Name.

Hi
I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
So I know Report name but don’t know which Business Area it belongs to.
How to find Business Area Name from Report Name?
Cheers
Vijay

Hi,
There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
select distinct doc_name, obj.obj_name folder_name, bas.ba_name
from eul_us.eul5_documents doc
, eul_us.eul5_elem_xrefs xref
, eul_us.eul5_expressions exp
, eul_us.eul5_objs obj
, eul_us.eul5_ba_obj_links bol
, eul_us.eul5_bas bas
where xref.ex_from_id = doc.doc_id
and doc.doc_name = &your_report
and xref.ex_to_id = exp.exp_id
and obj.obj_id = exp.it_obj_id
and bol.bol_obj_id = obj.obj_id
and bas.ba_id = bol.bol_ba_id
Rod West

How to submit a concurrent request from Discoverer report.

I would like to know If any one has tried submitting a concurrent request from Discoverer Report?_
This is no stupid question, but our team here finally decided with a solution to our long pending issues with few of the discoverer report. To Proceed further, we would like to know, how to submit a concurrent request from Discoverer report?
We are looking for calling a package from the Disco admin by passing the parameters from the disco to the 6i report.
All help us in this regards are much appreciated.
Kindly help us in the same!
Thanks
Arun

Thanks Rod for confirming the same.
I will be trying the same today and will let you know if I succeed in doing it.
If I can share the actual requirement with you, it goes like this.
"I will be triggering the Oracle 6i standard AP Trail balance report through the Disco report. The standard report will be inserting the required data to one of my custom table. Once the concurrent program completes normal, my custom table will be having the required data to create the workbook specific to the current run of the concurrent program.
The one problem which I think could happen is, How can I make my disco report to wait till the standard program to complete in normal so that my disco report can be generated with the data from custom table.
Will the above requirement is possible If I follow the way you mention in the PDF or Could you suggest a better way for achieving the same.
In short, my requirement is: The custom table(say XX_TABLE) will be populated with data when the standard 6i report is run and the disco admin will be making of the custom table (XX_TABLE) to generate the report.
Please advice.
Thanks
Arun

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone? I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them. Do I need to copy an entire album or can I just pick & choose individual songs? The phone is question is an LG running who knows what for an operating system.

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

How to crop 204 x 360 from 1280 x 1080?

Similar Messages

Maybe you are looking for