How to customize install with the restore DVD's

HI,  Is there a way to customize the install of the restore DVD's for Vista.
For example, I wouild like to have 2 partitions.  Also, I do not want all the extras installed, mcafee, etc.
Thanks
Solved!
Go to Solution.

Is the restore partition intact on your Thinkpad?
If you run the restore from the restore partition it gives you the chance to do a "Custom Restore" where you can choose to not install some of the programs.
When you run the cd's it wipes all partitions and installs the resore partition. Then it restores windows from the restore partition without the option to do a custom restore. You would have to restore asecond time from the hard drive to get the custom restore.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Similar Messages

  • My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library?  How do I sync with the newly installed iTunes without losing all of my data on my ipad?

    My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library?  How do I sync with the newly installed iTunes without losing all of my data on my ipad?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I need to install my photoshop elements 11 to my PC (does not have a cd drive). I have the serial number- how do I install with serial number?

    I need to install photoshop elements 11 to my PC (does not have a cd drive). I have the serial number, but don't know how to install with the serial number. Can someone help?

    Here is the link you can find the Elements' installers at: Download Photoshop Elements products | 13, 12, 11, 10
    Benjamin

  • When I connected to iTunes, my phone said it was in "restore" mode, but I don't know why.  Iam afraid that if I continue with the restore, I will lose my recent pics.  How can I check iCloud to see if my pics are there?  Will I lose my pics if I restore?

    When I connected to iTunes, my phone said it was in "restore" mode, but I don't know why.  Iam afraid that if I continue with the restore, I will lose my recent pics.  How can I check iCloud to see if my pics are there?  Will I lose my pics if I restore?

    Crouching Tiger wrote:
    When I connected to iTunes, my phone said it was in "restore" mode, but I don't know why.  ...
    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimize Loss... Once you have Recovered your Device... Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • After I installed ios7, I entered the wrong Apple ID. How do I replace with the correct ID?

    After I installed ios7, I entered the wrong Apple ID. How do I replace with the correct ID?

    OK, so all you need to do is:
    Go into Settings>iTunes, tap on the Apple ID and then tap on Sign Out. Then sign back in with your new Apple ID.
    Go to Settings>iCloud, scroll to the bottom and tap on Delete Account (it will ask you for a password). Try typing in the password that you think goes with that Apple ID. If that doesn't work, try your current Apple ID password. If that doesn't work, go into Manange your Apple ID and sign on with the old Apple ID and reset the password:  https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Once you have deleted the old iCloud account, you can then go to Settings>iCloud and sign on with your current Apple ID.
    Cheers,
    GB

  • How can I clear out whatever is making Firefox always start with the restore sessioin screen?

    The restore session screen appears with the same website. I cleaned out my cache, updated to the latest version and it still comes up with the restore session.

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

    I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
    In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
    <B>DESCRIPTIONS</B>:
    This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
    <B>INSTRUCTIONS</B>:
    1. Run the VI.
    2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
    <B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
    3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
    4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
    <B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
    1. SVL Scale Voltage to EU.vi
    2. OAT Digital Tacho Process.vi
    3. OAT Get Even Angle Reference.vi
    4. OAT Convert to Even Angle Signal.vi
    5. OAT Compensate Even Angle Signal.vi
    My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
    Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
    Solved!
    Go to Solution.

    Hi CracKatoA.
    Take a look at the link bellow:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
    Regards,
    Filipe Silva

  • Need help with the restore-mailbox command

    I just started playing around with the restore-mailbox command now that the Recovery Storage Group and exmerge are not options in 2010. I am hoping someone can help me out here. I am working in a test environment. What I did was backup a database with a
    single mailbox on it called testex2010. I used Windows backup. I then restored the database and logs, created the recovery database using the shell and was able to mount the database after running eseutil /R etc...
    I now want to recover the data in the mailbox testex2010 to another mailbox called Recovery Mailbox in the production database. I was able to successfully restore testex2010 to itself. I proved  this by deleting all the messages in the live database,
    running the restore command and seeing the messages back in the live mailbox.
    The command I used was restore-mailbox -identity testex2010 -RecoveryDatabase RDB1
    I am prompted with the "are you sure" text and after hitting yes, all goes well. I now want to restore to another mailbox in the production database called Recovery Mailbox. This is where it breaks down. No matter how I format the command, I cannot get it
    to work. Two questions:
    1) should I be able to see mailboxes in the Recovery Database using the GUI or the Shell or do you just assume they are there?
    2) what is the command to restore messages from a mailbox in the Recovery Database to another mailbox in the production environment?
    Is what I am trying even possible? Just so you know, I did try this command"
    Restore-mailbox -identity testex2010 -RecoveryDatabase RDB1 -RecoveryMailbox "Recovery Mailbox" -TargetFolder testex2010
    It fails telling me that the mailbox Recovery mailbox is not in the Recovery Database.

    Restore-mailbox -identity testex2010 -RecoveryDatabase RDB1 -RecoveryMailbox "Recovery Mailbox" -TargetFolder testex2010
    The wording of the
    Restore-Mailbox command can be tricky. If I look at your example above, this is what it would attempt to do...
    Restore the content of the mailbox with display name "Recovery Mailbox" in the RDB into the mailbox testex2010 under a folder named testex2010.
    Think of the -Identity parameter as the mailbox you want to restore INTO.
    Think of the -RecoveryMailbox parameter as "Recoverying The Mailbox of..."
    Also get into the habit of using the DisplayName with -RecoveryMailbox.
    Microsoft Premier Field Engineer, Exchange
    MCSA 2000/2003, CCNA
    MCITP: Enterprise Messaging Administrator 2010
    Former Microsoft MVP, Exchange Server
    My posts are provided “AS IS” with no guarantees, no warranties, and they confer no rights.

  • Starting up a mac with the restore disc?

    I want to repair the the startup disc but they said I need to start the computer up with the restore disc? How do I do this? Thanks.

    Hold the mouse button down while rebooting to open the cd tray if need be.
    Hold c while the disk is in the Mac to boot from the installer disk.
    Select Disk Utility from the installer menu and Repair Disk if you need to do that.
    If you have a new Mac and want to run the Apple Hardware Test, option boot from the same cd instead.
    As you know AHT updates with changes to Mac OS X, so the copy on the write only disk doesn't get updated. So don't totally freak if you get a error, it might be the firmware is changed. (on the Dual 2 you will too, I know )

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

    firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

    Glad you seem to have sorted things out.
    The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

  • How do I deal with the"new itunes library" fiasco

    how do I deal with the "new itunes library" fiasco...?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Premiere elements 11 failed to install with the error about shared technologies

    PRE 11 failed to install with the error "The installation process has encountered an error while installing shared technologies. Please restart your system and try again" all that does is uninstall everything and I have to restart agin with the same error and we go on. So far the only way it is working is at the point of the "error message" I run task manager and stop the installer, I know it's leaving files that should be removed by the installer, but it worked. This information was gained on one of the forums and seems to work. Yesterday was the first time I really used it fully and although I was able to create a project I cannot output it as a file (mpg), it starts to output ok then throws up an error and fails. As PRE 10 was still installed I imported the project (which amazed me) into PRE 10 and outputted as required with no error. All this may be due to something being wrongly installed or not being installed in PRE 11, I don't know. Can anybody help
    Dennis
    using Windows 8 Pro
    PS I downloaded the Adobe Support adviser and No errors

    See the following help document:
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

  • HT4436 Just did a restore for a new 4S. I want to do a new iCloud account and discard the one that came with the restore. Any suggestions?

    Just did a restore for a new 4S. I want to do a new iCloud account and discard the one that came with the restore. Any suggestions?

    Welcome to the Apple community.
    Settings > iCloud, scroll down and delete the account, sign back in by choosing the option to create a new Apple ID.

  • Are the fonts installed with the Mac OS OK to use for commercail use? ie, a logo which willbe used for packaging, TV broadcast and internet.

    Are the fonts installed with the Mac OS 10.6 OK to use for commercial use? ie, a logo which willbe used for packaging, TV broadcast and internet.

    srjeffgr wrote:
    Some font foundries require extended licesnes for different uses.
    You're welcome. Again, as mentioned in that discussion, you can use Font Book to check if the foundry has entered any license limitation notices in the font info (Preview > Show Font Info).
    Basically, fonts are code. The copyright applies to the code. If the product you distribute doesn't include the code, then the copyright does not apply to it. That's why embedding has to be dealt with specifically, because embedding fonts in a document means including the code or parts of it in the document.

Maybe you are looking for