How to cut off data use on a line in a family share plan?

Is there a way to cut off data useage on one line in a family share plan? I have one person that is going over and want to simply cut off the data use after she reaches say 110% of her use in the billing cycle.

I agree get Family Base and charge then the extra $5 it will cost since that person doesn't seem to understand the concept of SHARING. Or up the data plan and charge the extra to them and tell them since you had to increase the data plan because them they can pay the extra mount.

Similar Messages

Using iphone 5 as hotspot with family share plan?

I have been on a AC FAMILY SHAREPLAN 700 (which is no longer available) and just upgraded to an iphone from a flipphone last week. At that time, I selected the 4G plan that allows me to use my iphone as a hotspot and a 1000 text plan. The plan to enable hotspot cost more than just a standard data plan. I just looked and this applies only to my line, not the other family lines. So if I switch to the "4 GB Shared Data - Unlimited Talk & Text Share everything across all your devices." do I lose the hotspot capability for my iphone? There is no plan option that calls out hotspot when I try to switch it online. Thanks.

The Share Everything Plans include the mobile hotspot feature for all the lines on that account. The data is shared between all the lines too.

How can I cancel one line in a family share plan?

What are the fees associated? Is this possible to do from the web?

There may be an Early Termination Fee (ETF) if the line is still in contract. Typical ETF's are $350 minus $10/month in contract for a smartphone or $175 minus $5/month in contract for a basic phone (based on the type of phone subsidized when the contract was started).
To cancel, you must call Customer Service or visit a store (canceling cannot be done online by yourself) so then you can find out the appropriate fees for the line you want to cancel.
Good luck.

Upgrade on Family Share Plan Shows Different Dates ?

I upgraded both phones on my plan exactly 2 years ago this month. My phone (which is the main line) says it's been eligible for an upgrade since September 21 on the other hand the other phone on the plan says it's not eligible for an upgrade until June though they were both upgraded at the same time ? I have an LG EN-V 2 and the other line is a LG Versa. What's the reason for the different dates ?

The primary line on a Family Share plan is eligible for an annual upgrade after completing 12 months of its 2 year contract. Secondary lines are only eligible for an upgrade after completing 20 months of the 2 year contract.

Query to get the a/r receivables based on a cut-off date

I would like to ask assistance on how to create a query to display a/r receivables using a cut-off date. Example, today is 05/07/2014, I want to display a/r posted from Jan. 1 2013 up to Dec. 31, 2013 that are still unpaid as of April 30, 2014.

Hi,
Try this:
eclare @Cust as nvarchar(20)
Declare @FromDate Datetime
Declare @ToDate Datetime
declare @Group as nvarchar(20)
set @cust = (select max(t0.cardcode) from OINV t0 where t0.cardcode = '[%0]')
Set @FromDate = (Select min(t0.Docdate) from dbo.OINV t0 where t0.Docdate >='[%1]')
Set @ToDate = (Select max(t0.Docdate) from dbo.OINV t0 where t0.Docdate <='[%2]')
set @group = (select max(t2.groupname) from OCRG t2 where t2.groupname = '[%3]')
SELECT [CustName] as CustName, [G] as CustGroup,[1] as Jan,[2] as Feb,[3] as Mar,[4] as April,[5] as May,[6] as June,[7] as July,[8] as Aug,[9] as Sept,[10] as Oct,[11] as Nov,[12] as Dec
from
(SELECT T0.[CardName] as CustName, sum(T0.[DocTotal]) as Total, datepart(mm,T0.[DocDate]) as week, t2.groupname as G FROM OINV T0 left JOIN OCRD T1 ON T0.CardCode = T1.CardCode left JOIN OCRG T2 ON T1.GroupCode = T2.GroupCode WHERE year(T0.[DocDate]) = 2013 and T0.[CardCode] = @Cust and T0.[DocStatus] ='o' and T0.[DocDate] between @fromdate and @todate and t2.groupname = @group GROUP BY T0.[CardName],T0.[DocDate],t2.groupname
union all
(SELECT T0.[CardName] as CustName, -sum(T0.[DocTotal]) as Total, datepart(mm,T0.[DocDate]) as week,t2.groupname as G from ORIN T0 left JOIN OCRD T1 ON T0.CardCode = T1.CardCode left JOIN OCRG T2 ON T1.GroupCode = T2.GroupCode WHERE year(T0.[DocDate]) = 2013 and T0.[CardCode] = @Cust and T0.[DocStatus] ='o' and T0.[DocDate] between @fromdate and @todate and t2.groupname = @group GROUP BY T0.[CardName],T0.[DocDate],t2.groupname )) S
Pivot
(sum(S.total) For WEEK IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12])) P
Thanks & Regards,
Nagarajan

Process chain - cut-off-date

Hi guys,
in the process chain I have to check if today is cut-off-date. If it is the case process should continue if not it should be canceled. How can I do it. At first I wanted to use decision, but I think I should use ABAP in this case.
Thank you in advance
Regards
Erwin

Hi,
Just write small ABAP Code and check the Date and then based on that Raise Event, you schedukle this program everyday, so it will check the Date and then it will trigger Event, if condition is not satisfied then EXIT.
And give this event in Process Chain.
Check similar kind of thread, but you need to change the logic.
Re: Stopping one process chain when another is running
Thanks
Reddy

Separate month end cut-off date

Hi,
I have 2 companies in a same clients.
These 2 companies would like to have separate month end cut-off date.
Please advice how to do it in OB29.

Hi,
You can do so.
You need to define two different posting period variant, where in the first one, for each month define the end date.
SAy if you define month 01 date 28 as period 01 and month 02 date 26 as period 02
Then period 02 will be from 29 jan to 26 feb.
Then assign these posting period variants to your company code in OBY6.
In that way you can differ the period end for two company codes.
Regard,
Gaurav

Export to text file cuts off data...

I have a report that contains fixed width formuals that are in a text box. The data is 496 char wide. It will preview fine in a small font - but when I export to a text file it re-sizes the font to courer new 10 and cuts off data after 80 char. Any ideas?

hi
as per my experience crystal has got some weird limitation in export.
AG

How is the Raw data used in iPhoto. I currently shoot both jpeg and raw and import them both into iPhoto.

How is the Raw data used in iPhoto? I currently shoot both jpeg and raw and import them both into iPhoto. What do I gain by collecting Raw data?
Thanks

You get more parameters for making adjustments to the image. This is not really an iPhoto question but more a general photography one. In rather simple terms here's how a digital camera works:
You expose an image. A lot of data is gathered in by the sensor. But it's just a bug lump of data and not very useful in that form.
In cameras that shoot jpeg that mass of data is interpreted/processed into an actual image, and the image is stored in a jpeg file. (that's a process broadly analogous to developing a film). The decisions that go into making that interpretation are all made by an engineer somewhere, back when the camera was developed.
If you shoot Raw, then what you do is take that mass of data, and rather than working to the decisions made by that engineer, you develop the shot - you run the digital darkroom.
Why would you do this? Take on all this extra work? Well one of three reasons: a: you think you can do a better job than that engineer. b: you just prefer the result you get when you develop yourself or c: you're a hopeless shooter and raw means you have more options to fix the mistakes you made in the camera. (That's why I do it.)
Here endeth the two dollar tour. So, basically, if you're happy with what your camera produces in Jpeg then there's really no need to shoot Raw.
There's no need at all to shoot Raw+Jpeg as iPhoto creates a jpeg preview when you import, so you're just wasting space.

How to display today date using formcalc

Hi all,
how to display today date using formcalc, eg April 20, 2009?
Thanskks

Num2Date(Date(), "DD/MMM/YYYY", "de_GB")

Build in clear type in Safari -how to cut off?

Somebody know how to cut off CLear TyPe in Safari 3.1?

You can manually disable Apple's version of text antialiasing by following the instructions found here:
http://webkit.org/blog/168/gdi-text-on-windows/
Note that this will also disable some of Safari's advanced text handling (and probably hasn't been extensively tested); it might be best if you wait for Apple to roll in the code that allows you to switch between ClearType and Apple's, which seems to be on the horizon. fwiw.

How to insert the data using matrix

Hi
All how to insert the data using matrix feild
plz help me
   thanks
    Loy

Hi Loy,
The best way to fill an entire matrix is to use a DBDatasource, here is some sample code:
Dim oForm As SAPbouiCOM.Form
oForm = SBO_App.Forms.Item("YourFormTypeID")
        '1. Add a DBDataSource to the form
        oForm.DataSources.DBDataSources.Add("OUSR")
        Dim oColumnDBS As SAPbouiCOM.Column
        Dim oColumnUDS As SAPbouiCOM.Column
        Dim i As Integer
        Dim GenEdt As SAPbouiCOM.EditText
        Dim oMatrix As SAPbouiCOM.Matrix
        Dim oColumns As SAPbouiCOM.Columns
        Dim oDBDataSource As SAPbouiCOM.DBDataSource
        oMatrix = oForm.Items.Item("7").Specific
        oColumns = oMatrix.Columns
        '2. DBDataSource: Binding a field / alias of the table to a column
        oColumnDBS = oColumns.Item("V_1")
        oColumnDBS.DataBind.SetBound(True, "OUSR", "U_NAME")
        '3. getting the data sources bound to the form
        oDBDataSource = oForm.DataSources.DBDataSources.Item("OUSR")
        oMatrix.Clear()
        ' Querying the DB Data source
        oDBDataSource.Query()
        ' Adding the data to the matrix
        oMatrix.LoadFromDataSource()
When you want to fill a specific field use :
GenEdt = oMatrix.Columns.Item("V_2").Cells.Item(1).Specific
                GenEdt.String = "Hello"

How to increment the date using sequence?

how to increment the date using sequence?
01-jan-10
02-jan-10
30-jan-10

794244 wrote:
how to increment the date using sequence?
01-jan-10
02-jan-10
30-jan-10This doesn't look like a task where a sequence is usefull.
A sequence is a number generator that guarantees that multiple sessions will all get a different number.
Even if the sequence is fetched for differnent users (=sessions) that the same time.
This in turn means that the value returned by the sequence will depend on actions done in other sessions.
Typical task: create a new unique primary key number. The number MUST be different in all sessions.
In your case I guess that the same logic should work regardless of the session that executes it. So you need a "number generator" that works indepented from other session values. There are several ways to create such a numbered list.
The basic idea is to create a select statement that simply returns as many rows as you need. And then use ROWNUM as the number generator. Examples how to do this have already been given. LEVEL works also in hierarchical queries.
if my interpretation of your requirement is right, then all answers that really used a sequence seem to be wrong. Even if the output looks ok. At best they are just slow. To create new sequence values is a complex task and the database needs a little time for all the synchonization issues that come with it. At worst it will have gaps in the sequence because other sessions used the same value while the numbers were created.
Edited by: Sven W. on Sep 20, 2010 2:08 PM

How do I get off a family share plan if I'm not the account owner?

how do I get off a family share plan if i'm not the account owner?

kydd33 Good question! If you are looking to be removed from the family share plan, then the account owner would need to give you (or the person looking to take over your line ) permission. This is known as an Assumption of Liability (AOL). I am assuming that you want to keep your Verizon phone number and are looking to remain a Verizon Wireless customer. If so, the age requirement is atleast 18. Also, the current account has to have a current balance. If another VZW customer is taking your line over then their account would need to have a current balance, as well. To proceed, have the account owner call customer service and authorize that you can remove your line from their account. There is not a penalty or fee for the account owner.

How to access the mysql using ordinary command line in Azure Website?

Hi
I deploying Django project on Azure. I created project and MySQL db according this method: https://pytools.codeplex.com/wikipage?title=PollsDjangoSql . I can create tables using django command "syncdb" in Visual Studio. I see
db structure in SQL Explorer. All works. But now I need to get access directly to mysql. For example with a view to set encoding of some column, or set permissions, change user password, etc.
I found about many different tools and methods in Microsoft portal. But the purpose of these tools, how to install it and how to use it is a very entangled (After several attempts to find out what's what two weeks later I found on my computer
three dozen programs with unknown purpose. I doubt that I need to install so many tools to just add the user in mysql).
How to access the mysql using ordinary command line (or the same simple tool) in my case?

Hi pvgdrk,
To get access directly to a mysql database, you can use the commandline tool(open a cmd window-->type mysql the commadline ) or the
GUI MySQL workbench.
Since this is a question about MySQL, I would suggest you post your question in a dedicated MySQL forum. You will get more prompt response.
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support

How to cut off data use on a line in a family share plan?

Similar Messages

Maybe you are looking for