How to deactivate a shared Hard drive on Airport Extreme - keeps sleeping

was curious if anyone one knows how to temporally deactivate a shared Hard drive on Airport Extreme - keeps sleeping every 30mins and have to wait 12 second for the drive to spin up and wait for the beach ball to stop spinning. Getting really aggravating.... Thanks

The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
The AirPort can only share drives formatted in HFS+ or FAT32.

Similar Messages

  • How to setup a Wireless Hard Drive on Airport Extreme to access on anywhere

    Is there anyway to access a Hard Drive connected to my Airport Extreme via USB from anywhere? It works great on my local network but would like to be able to access it anytime anywhere? Is there an application I need and will I also be able to see everything on my iPhone?

    apple doesnt sell hard drives.  Look on newegg.com or macsales.com.  Any 2.5" that is 9.5 mm or less in height will fit.  Here are installation instructions: http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Hard+Drive+Rep lacement/7513

  • How to connect a hard drive on Airport Extreme (second edition)

    how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

    The USB port your Mac is high powered. The port on the AirPort Extreme is not.
    So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
    Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
    You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
    Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

  • File transfer speed in Shared USB Hard Drive via Airport Extreme

    I' am planing to buy one of this, but first I need to know what kind of file transfer speed I can expect when sharing USB drive via Airport Extreme 1000Mbps Ethernet.
    Thanks.
    Message was edited by: Robert81

    most likely 14m/sec but normally 10.5 this is ethernet wired and usb attached. wireless would be about 8M/sec
    Wired is good enough I use it for Finder copy frequently.

  • Can't add hard drive to Airport Extreme

    I wanted to add an external hard drive to Airport Extreme and I can't get it to show up in my net work. If I go to the configuration program for Airport Extreme, I can see that the base station has identified that hard drive (a Lacie 750 mb drive). Any suggestions?
    Message was edited by: Karlhan

    I have the exact same problem with one twist I tried adding an 8gb memory stick instead of a spinning hard drive. Airport utility recognizes it but it does not show up on any of the computers.

  • How do I use a seagate external hard drive with airport extreme?

    I have a 1tb Seagate external hard drive and I connected it to the USB port at the back of my Airport Extreme. I opened Airport Utility and am now lost. How do I access the hard drive?
    (I have a Macbook Pro running os x version 10.8.2)

    The external hard drive must be formatted either in Apple's HFS+ or in Microsofts FAT32 in order for it to be recognized. You can format the drive by connecting it to your Mac and bringing up "Disk Utility".

  • Mount Hard Drive on Airport Extreme-my experience

    Hi-hopefully this will help fellow strugglers:
    I have setup and been using a Apple wireless network in my home for several years - Airport Extreme 2.4 Ghz/5Ghz ver. 7.6.1 - (newest model), Airport Express. It is working fine. I am describing how I  mounted a USB hard drive to the Airport extreme USB Port:
    Disk Description :
    Maxtor OneTouch III Media
    Total Capacity :
    120.03 GB (120,034,123,776 Bytes)
    Connection Bus :
    USB
    Write Status :
    Read/Write
    Connection Type :
    External
    S.M.A.R.T. Status :
    Not Supported
    USB Serial Number :
    2CASC4FY
    Partition Map Scheme :
    Apple Partition Map
    OSX 10.8.2
    I believe this is USB 2.0 connection(USB 2.0 A to Mini-B cable)
    My MacPro is
    MacBook Pro (15-inch, 2.4/2.2 GHz)
    MacBookPro3,1
    I opened the Airport Utility (ver 6.1-610.31) and select the Airport Extreme (green light on) and click edit. Then am presented with the following tabs at the top (Base Station, Internet, Wireless, Network, Disks). I check the 'Disks' on the dialog box, I did not enable file sharing and share disks over WAN. My hard drive showed up in the window of the dialog box. Now when I open a Finder window my hard drive can be found under "Charles' Airport"). I hope this helps anyone else trying to do same. Good luck. Now, I wonder if I can do my backups through time machine? Later CB

    Now, I wonder if I can do my backups through time machine?
    Although Apple says that you cannot do this, other users have been able to do this with varying results.
    it does seem to work for some users, while other users.....like me....find that backups work OK for a few weeks to even a month or more and then find that the backups have become corrupted.
    There is nothing wrong with trying things out to see how they work for you, but I would never do this unless I had a secondary backup plan in place.

  • Usb hard drive and AirPort Extreme

    I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great.  However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder.  If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked.  Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
    Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
    Thanks

    OK, I feel silly on this one. 
    After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
    The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
    Hope that helps.

  • How do I backup folders on my shared USB drive on Airport Extreme?

    Hello,
    I have a USB drive as a shared drive on my Airport Extreme.  I DO NOT want to use it as my backup drive.  I have a drive connected to my MacBook Air.  But I want to back up folders on that shared drive where my photos and music are stored.
    I don't see an option in Time Machine.
    How do I do this?
    Thanks

    Time Machine will only backup your Macs internal hard disk or any external hard disks physically attached to the Mac. Time Machine can not backup one remote device to another remote device.
    To backup the external HDD, you would need to first attach it to your Mac, for Time Machine to "see" it. Unfortunately, this would not be very convienent in the long run.

  • How can I set up a back up hard drive on airport extreme

    I have an external harddrive that was plugged into my airport extreme. Apple seemed to eliminate my abilty to back up wirelessly in one of the updates. How can I set this up again? Does anyone know a way around this?
    Thanks,

    Ah, I remember those links now.  I was thinking something along the lines of:
    Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
    Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
    Store important data on multiple servers on multiple continents. 
    Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, multiple places.
    Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy. Archival DVD blanks such as Taiyo Yuden, rated for 100+ years are what the pros use, these are made by JVC and are professional grade DVD blanks.
    Most people have never heard of archival DVDs, however their cost is only 30% more than junk-level DVD blanks which are only rated for 5-10 years. Also the reject rate on the inferior DVD is around 15%, the cost is almost identical between the WORST DVD blanks and the BEST DVD blanks.
    Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none due to possible fire.
    Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a cloned and updated hard drive handy at all times to return to immediate productivity and utterly avoid programs and parameter reinstallation.  Nothing is quicker than taking out a dead HD and tossing in a new updated cloned HD for getting back to 100% in under 20 mins!
    Decentralized Omnipresent Data (D.O.D.)
    (something I coined an age ago)
    Backing up data to:
    Multiple HD in multiple locations
    On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
    Burned onto archival optical and magnetic storage
    Have unclassified data possessed by multiple people in multiples places.
    When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

  • How do I remove an external hard drive from airport extreme using airport utility 6.2

    I want to remove an external drive from my airport extreme but unsure how to do so (apart from just unplugging it). I need to take it away and hopefully plug it back in later. Any advice would be appreciated.

    Unfortunately, AirPort Utility 6.2 does not provide you with the option to "unplug" a drive.
    If the drive is mounted on your desktop, simply drag its icon to the Trash.....or.....right-click the disk icon and choose the Eject option.
    Now you can disconnect the hard drive from the AirPort Extreme.
    If the drive does not appear on the desktop, then you can simply physically unplug the drive.

  • How do I get my computers to see my external hard drive on airport extreme?

    I jus purchased and airport extreme as although he directions say plug and play - it doesn't work.  None of my computers see my external hard drive when it is plugged into the airport.  Cannot locate directions with step by step support.  thank you. Nettie

    The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
    Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
    The AirPort can only share drives formatted in HFS+ or FAT32.

  • Set up a shared external hard drive on airport extreme a1034?

    I would like to do this
    http://www.apple.com/airportextreme/features/harddrivesharing.html
    with my old airport extreme, is it possible? also Id love to set it up with my airport express to print, and for airtunes capabilities.
    has anyone done this?
    I need help, i cant figure it out.
    Thanks bunches!

    wonderful! so if i were to go to ebay and buy any802.111n airport extreme, it will work with the hard drive sharing?!
    or is this only in the newest model?
    basically, i just want to make sure i purchase the model that apple is advertising now
    http://www.apple.com/airportextreme/specs.html
    and was hoping for a specific model number... unless what you gave me is that?
    Thanks mate

  • External hard drive on Airport Extreme - how to eject it?

    Hello: I just connected a UBS hard drive to the Airport Extreme and it works great. I just don't know how to eject it safely, as I would connecting it to my computer (drag to trash and it turns off). Can anyone let me know how to do this?
    Thank you in advance!

    Welcome to the disussions!
    When you open the drive, it should appear as an icon on your desktop.
    When you want to eject the drive, right click the drive icon on your desktop and then select "Eject xxxxx". Or, if you prefer you can simply drag the icon to the trash.

  • How to Acess iPhoto Library in External Hard Drive thru Airport Extreme and iPad

    My iPhoto library is currently in an external hard drive that's connected to an Airport Extreme.  I want to be able to access this library thru my iPad.  Is there any way to accomplish this?  I have spent endless hours online looking for an answer, but so far I have not found it.
    Thank you so much for the help !!!

    It may sound like a stretch, but there are so many people who have already solved more complex tasks than this one.
    I can't believe the only solution to this problem is to use LogMeIn/GotoMyPC or other remote control applications to access the library thru my MacBook Pro.   There is also an app for iPhones called NetPortalFile and I can view the individual pictures (but it ***** because I can only see one at a time and my wife has 60,000 pics...).  Almost there with solutions, not integrated all yet that I know of and that's why I am asking.
    I'll keep waiting, maybe someone has already figured it out or they are working on an app :)

Maybe you are looking for