How to debug a load that has already happened

Hello Experts,
I have a load from an InfoCube to a DSO.  It's a 7.0 dataflow, no start routine, and only straight mapping between object to object.  From the InfoCube I have a key figure 0RPA_RLQ being mapped to 0RPA_RLQ which the key figures are loading and appearing correctly in LISTCUBE for the target DSO.  However, the unit of measure InfoObject 0SALES_UNIT is also straight mapped to 0SALES_UNIT in the target DSO but the "EA" is not being loaded 100% of the time.  These incorrect loads seem to happen randomly.
The load from InfoCube to DSO are Delta Loads.  The request in the source InfoCube is being rolled up in a previous step in the process chain.  Then after it's rolled up, then it's loaded into the DSO.  The loads are always successful.
HOWEVER - when I selectively load one of the records that loaded a blank value for 0SALES_UNIT, then the EA loads successfully.  So I can't do a debug using a new load.  I need to find out why the OLD delta loads weren't loading correctly.
Any ideas?  Thanks!

Hi,
Check the key combination of your DSO. It seems that your cube must be having multiple records for DSO's key and that is why Unit is being overwritten.
In DTP, there is a option to simulate data transfer and you can select the data values as well for data load. I think delta from cube happens on request basis, so try debugging your load by giving the selection on Request ID presend in the cube.
Regards,
Gaurav

Similar Messages

  • How to unrelease a task that has already been relesed?

    Hi -
    I would like to unrelease a task that has already been relesed.  By unreleasing, I would like to remove some unnecessary objects from the transport.
    Any ideas?
    Regards,
    -Sonny

    I have requested basis to merge the request.
    The old transport had released tasks with some unwanted objects.  By copying to new transport, I was hoping to remove unwanted objects and then release the tasks of new transport.
    However, the tasks of copied transports are already released and it does not allow to remove anything.
    Could the copied tasks be in unreleased state? 
    -Sonny

  • How to restart a program that has already started?

    On my previous cable TV system, I could restart a program after it had already started all the way back to the beginning, to see the whole program. How can I do this with FIOS?
    Thanks.

    tns wrote:
    I had only heard that Cablevision was doing this with its Virtual DVR.
    Essentially with Verizon FIOS you can only restart on a DVR what the DVR has in its buffer.  If it one of the tuners happened to be tuned to that station (even if the DVR was off), you can backup to the beginning of the program if its still in the buffer.  One way to see if this is possible, without rewinding, is to hit record, then look in your DVR recordings and select the program.
    Some days later you might find a program in the VOD section.  For some channels, e.g. movie channels, it may be already in VOD. 
    No. I don't mean with the DVR. Let's say I turn on a program at 9:17PM but it started at 9 PM. Is there a way I can re-start the program so I can watch it from the beginning? My cable company had a way to do this. Does FIOS?

  • How to edit a video that has already been exported?

    I have a video which was exported, however I would like to go back and edit some things. When I open FCPX, I am unable to find the video file at all, and the only way I can even see it in the program is by importing the already exported file. Obviously I cannot edit the video. If there are any suggestions on what can be done to retrieve the file, it would be very much appreciated! Thank you!

    Hi Mikaelaken,
    FCPX is generally good at keeping track of your projects, events and media.
    What version of FCPX are you running?
    If you dont see the project at all in your projects/events list, it may be that you moved some files about outside of FCPX in Finder? I suspect it isnt lost, just misplaced
    Perhaps a brief description of your recent workflow/activity with respect to this project may help us to help you
    Cheers,
    Bammers

  • How do I get a refund on Export PDF that has ALREADY been agreed

    On 1/21-1/22 I tried to 'renew' a subscription for Export PDF. By some error (maybe mine - I just dont understand the whole thing) my Bank was immediately charged for two subscriptions, each at a different price. I immediately "chat"ted with several  reps (it was difficult to get onto the chat and find out how to cancel) and was assured that both would be cancelled and refunded. They weren't!
    I waited a week. Was again frustrated by the chat hookup, and tried the 'cloud' retail product tel #, assuming it was wrong but that I could be switched to the correct one. Had a very pleasant chat, was assured that both would be cancelled and refunded, received 2 e-mails confirming the cancellations, each with a seperate "Case #". Felt pretty good! It had only taken me a week of reasonably diligent effort to get a very simple thing done! IT WASN"T DONE! (Yes, I apologize - I know I'm loud - but by now I've got steam coming out of my ears!)
    Today I got an e-mail, telling me that the refund had been processed and the case # would be closed. I looked at my bank, and only one had been refunded! I reviewed all the other e-mails and the notes from the telephone calls and chats to be sure I hadn't misunderstood something. But, no I hadn't. I went to my Adobe on-line and looked up 'my orders' history. Sure enough one had been invoiced and refunded ( the lesser charge of the two) but the other had ONLY BEEN INVOICED - NOT CANCELLED. And it seems that every piece of this transaction generates a new "order" , "case" or some other "reference #" - none of which are tied together, except by the invoice amount, when it is mentioned - which it typically IS NOT.
    My question, then, is : How can I get past this absolute frustration over every aspect of my interaction with Adobe and GET THIS TAKEN CARE OF?????????

    Hi Stacy,
        What frustration? (Just kidding !)
        As I mentioned, one of the two charges has been  refunded. Credited by
    Adobe on Jan 28, I believe I received it in my bank on Jan  30.
        The other charge, $25.37 of order # AD011017507,  has not been received
    by my bank yet. But this can't be that much of a surprise,  and has nothing
    to do with "10 business days" for refunds to post.
        To this minute, "My Orders" on Adobe website shows  that the order #
    AD011017507  was invoiced on January 22, but that no  credit invoice has been
    posted against this order to this moment!
        Can you begin to understand the frustration of  being unable, through
    all attempts to untangle this mess, starting within  one hour of the original
    order, with I believe nine different "Chats",  telephone calls and, finally
    a "problem" posting,  stretching over more  than thirteen days. Of course
    it doesn't make much sense to devote this much  attention to less than $50
    worth of stuff, but I do not let things like this  dangle.
        And can you imagine how loathe I am to deal with  Adobe for fear of
    some real problem?
        At any rate, I would certainly be pleased if you  can suggest a way for
    me to extricate myself from this. Any help would be  GREATLY appreciated!
        Thanks for your time and any trouble,
        Stephen Ellis
        <removed by admin>
    In a message dated 2/3/2014 4:08:59 P.M. Eastern Standard Time, 
    [email protected] writes:
    Re:  How do I get a refund on Export PDF that has ALREADY been agreed 
    created by StacySison (http://forums.adobe.com/people/StacySison)  in 
    Adobe ExportPDF - View the full  discussion
    (http://forums.adobe.com/message/6082008#6082008)

  • How do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

    how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

    jen19 wrote:
    how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?
    Just buy something.

  • How can I verify credit of an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    How can I verify credit for an itunes card that has already been redeemed?  My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

    Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
    If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to)

  • I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

    I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
    Thank you.

    Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

  • How can I debug a sequence that has a subsequence is running in a separate thread?

    Hi,
    How can I debug a sequence that has a subsequence is running in a separate thread?
    I have to have a continues check for a  digital in signal to be able to terminate the sequence if a physical button is pushed.
    This is running in a separate thread, but this way I cannot debug the main sequence.
    Is there any workaround for this?
    Thanks,
    Andras

    This KB might help you:
    http://digital.ni.com/public.nsf/websearch/46D1E157756C37E686256CED0075E156?OpenDocument
    Let me know if this does not help.
    Allen P.
    NI

  • How to create a new partion in my HP (Compaq LE1902x )PC that has already 4 primary partitions ?

    How to create a new partion (to save my files & Folders) in my HP (Compaq LE1902x )PC that has already 4 primary partitions ? when something goes wrong along with OS(C) drive my all files are lost. so i want to create a new partition & dedicate it to my files & folders.

    I would consider another problem. What if the hard drive (not the OS) fails. You'd lose all your data, all partitions. It seems better logic would be to copy your files and folders to either an external hard drive or USB thumb drive.
    I would not use the internal backup program, but would manually copy the data. I also would not leave such device attached to the computer.
    In my system I have a separate USB thumb drive that stored critical medical and legal documents. That way, I can travel with it, as needed. I also clone my primary desktop every 30-45 days. That way, if I get a failure, it's only that far back on lesser files.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED

    제품 : FIN_GL
    작성날짜 : 2006-05-30
    HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED
    ===============================================================
    PURPOSE
    이미 Reverse된 원 Journal을 Reverse전 상태로 돌리고 싶을？？
    Explanation
    아래와 같이 원 Journal의 reference를 끊으면 원 상태로 복수시킬수 있다
    Example
    update gl_je_headers
    set accrual_rev_je_header_id = '',
    accrual_rev_period_name = '',
    accrual_rev_status = ''
    where je_header_id = <YOUR JOURNAL ENTRY'S JE_HEADER_ID>
    Reference Documents
    Note 1031929.6

    Hi there,
    Not exactly sure what you wanna do... but here is what I've understood...
    You can remove any old Transport Set in your Portal by going to the Browser Transport Sets within the Builder page over the Administer tab.
    As to import a new Transport Set into the Production server, what I suggest is that you make a valid backup (so that in case you have any problem it is easier to revert back) and later on override it (or if it is a major change, it would be better to drop the Page Group and reimport it clean) or import it clean to your Production server. Validate all things... and that's it.
    I hope it helps...
    Cheers,
    Pedro.

  • How do I get Firefox to prompt me to remember a password for a site that has already been visited?

    How do I get Firefox to prompt me to remember a site password for a site that has already been visited (probably in private mode)?

    Remove site(s) from the Exceptions:
    * Firefox > Preferences > Security: Passwords: Exceptions
    *http://kb.mozillazine.org/Password_Manager
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • How do I open a site in Muse that has already been downloaded from our server to my harddrive.

    Ho do I open a site in Muse that has already been downloaded from our server to my hardrive?

    Muse can open .muse files only. Sites downloaded to your hardrive as HTML cannot be imported to Muse. Pages need to be designed in Muse in order to be saved as a Muse project that you can always publish to the web.
    Thanks,
    Vinayak

  • ITunes syncs music that has already been loaded on my iPod?

    For a while now, every time I sync my ipod (160 GB Classic)to iTunes on my Mac it syncs music that has already been synced on my iPod many times before. I've noticed it's usually the same set of songs every time, and I've checked the files to see if there is any reason why it would be doing that, but they are the same as everything else.
    Any particular reason this is happening?

    Not a clue, but it's happening to me, too. I have a 1st generation iPod Touch (16GB) and I get the same 15 songs synced every day I sync. It doesn't seem to happen every time, but pretty much every day. For example, if I sync twice while having the iPod plugged in (maybe after updating due to an application update, I might update again just to make sure everything worked.) Then the update is very quick with no backup or problem with the repeatedly synced songs. //sorry for the ramble.// Anyone else having this happen?

  • "Contacting server for information" when selecting a mail that has already been read

    In Outlook 2013 using an Imap/google account I very often the message “Contacting server for information” when selecting a mail that has ALREADY been read. I am not trying to forward or reply just simply selecting the mail. Why is the program trying to get
    information from the server that it already did receive once?
    How do I get Outlook to stop this ridicules behavior?

    Hi,
    Does this issue happen on each email you selected?
    Outlook displays this message whenever it needs to load content in your email, but the required content is being downloaded slowly or there is a connectivity issue with the content location.
    Please try to go to File > Options > Trust Center > Trust Center Settings > Automatic Download and untick the check box labelled "Don’t Download Pictures Automatically in HTML E-mail Messages or RSS Items". Click OK and then test again.
    In addition, if the email has a linked image, the image will not be downloaded locally on the system and it will be downloaded every time you open the email.
    Besides, some third-party add-in may also cause such issue. Please try to open Outlook in safe mode and check if this issue continues. To do this, exit Outlook, press Windows key + R to open the Run command, type
    outlook /safe and press Enter.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for