How to define Export parameter as Import parameter in next test script.

Hi Experts,
We have defined Purchase order no. as export parameter in ME21N transaction test script.
Test configuration for ME21N transaction executed succesfully and the Purchase order No. appeared in the last message
is the export parameter for next test script i.e. MIGO transaction.
However I am unable to define this export parameter as Import parameter in next test script for MIGO transaction.
Please suggest me the method to define the same.
Please Help...
Thanks in Advance
Vikas

Vikas,
You need to create super script which is nothing but having the both the steps (Po creation & MIGO ) in this eCatt script. This can be achieved by using the REF command as ex. below.
Create PO
REF ( Z_CREATE_PO , Z_CREATE_PO_1 ).
Create MIGO
REF ( Z_CREATE_MIGO , Z_CREATE_MIGO_1 ).
Z_Create_PO is the actual eCatt script that you recorded to create the PO. Z_CREATE_QUOTE_1 is the interface created by SAP. Similarly you have use the REF command to call the MIGO script inside this super script.
To pass the export parameter from PO step to MIGO, double click the Z_CREATE_PO_1and define the export variable for PO number. And do the same on the interface for MIGO step.
Follow the instructions if you need in this help document posted by another user in this forum
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0134775250DB00634934533836311611End?blog=/pub/wlg/3497
Note : Cut & paste the entire link above to view the document.
thanks
Venkat

Similar Messages

  • How to set EXPORT parameter from message mapping

    Again, ask the question of export parameter.
    I wrote a java version transformation and it worked good with export parameter.
    However I can not work it out in graphical message mapping. I refered http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm.
    In PI7.1, I add an export parameter "EXPORT_PARA" in the "Signature" tab. Are there any special step to assign this parameter to an UDF? I did not find a way to do it.
    And then I define an UDF,
    public String SetExportPara(String sss, Container container) throws StreamTransformationException{
    String str = "GOOD";
    GlobalContainer gc = container.getGlobalContainer();
    OutputParameters paras= gc.getOutputParameters();
    if(paras.exists("EXPORT_PARA ") == true) {
    paras.setString("EXPORT_PARA ", str);
    }else {
    str = "NOT FOUND EXPORT_PARA";
    return str;
    And I assign this UDF to one element of my output XML, I tried to run it in IE, it always output "NOT FOUND EXPORT_PARA.
    why?????
    I know there is a blog : https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/8654. [original link is broken] [original link is broken] [original link is broken]
    But it did not talk how to set export parameters.

    Hi,
    i read thread
    How to export parameters from Message Mapping
    and blog
    /people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
    but not found issue
    in this topic
    http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm.
    if i writting this code in UDF, i getting an error.
    If use this code:
    GlobalContainer gc = container.getGlobalContainer();
    OutputParameters paras= gc.getOutputParameters();
    paras.setString("EXPORT_PARA ", str);
    the export parameter is defined locally (in transformation step area). In integration process area parameter is equal to NULL.
    How send export parameter to Integration Process? For exapmple, i wanna send parameter to other transformation step in my integration process.
    thx.

  • How to define Lexical Parameter in Oracle report.

    Dear all,
    I need to know that how i will define lexical parameter in query of report builder
    i have like this
    SELECT R.EXCEPTION_MESSAGE EXP_MESSAGE,
    ER.PROD_ID PRODUCT,
    ER.TNAME SEGMENT1 ,
    DECODE(R.STATUS,'Y','ROW',
    'L','TABLE',
    'Z','CIB LEVEL',
    NULL) STATUS,
    NVL(COUNT(*),0) CNT
    FROM EXCEPTION_RECORDS ER,CIB_PROC_TABLES_RULES R
    WHERE ER.TABLE_ID=R.CIB_TABLE_ID
    AND ER.EXP LIKE '%'||R.EXCEPTION_MESSAGE||'%'
    AND ER.BRWR=:v_brwr
    &v_where
    GROUP BY R.EXCEPTION_MESSAGE,ER.PROD_ID,ER.TNAME,R.STATUS
    ORDER BY 2
    It is giving an error

    V_WHERE should be defined same way as regular parameter. It should acquire certain value that makes the query syntaxically correct bofore the sql is run, usually in the After Param Form trigger, e.g.
    v_where := 'WHERE 1=1';
    ...

  • How to define a parameter in a method of type com.sap.tc.webdynpro.progmode

    Hi All,
    I want to define a parameter in a method, type of parameter is com.sap.tc.webdynpro.progmodel.api.IWDNode,
    But when I browse on type and tehn in local dictionary, I do not find this type of datatype, please suggest how to assign this data type to any method's parameter.
    Thanks in Advance.

    Hello Amit,
    Please include  webdynproprogmodel.jar to build path, which can be found at    /sap/eclipse/plugins/com.sap.tc.webdynpro.runtime/lib
    Then you could able to user datatype IWDNode in your code
    Let me know if you need the jar file 
    Regards,
    Madhu

  • How to call a function in DLL file, while writing test scripts in ATML standards

    Hello all,
                I am trying to develop test scripts in ATML standards. I need to call a function in DMM.dll file. How can i do that in ATML standards, please explain with some example ATML standard XML file. Someone please help me in doing so. Thanks a lot in advance.
    With Regards,
    kalyan

    Hi srivinayaka,
                         I am attaching the XML file i have written in ATML standards and the Labwindows/CVI code that was generated when the XML file is opened in TESTSAND. actually the defenition of the function "IALdcpwr_reset()" is in IALdcpwr.lib and IALdcpwr.h files.
    "How can we add this library and header files?" so that i can show the path of definition. whether it should be done manually or can we do some changes in the XML file and make the work done?. Thanks in advance. If you have any example for this type of sequences. please forward me which would be helpful for me.
    With best regards,
    kalyan
    Attachments:
    XMLfile.doc ‏135 KB
    XMLfile.doc ‏135 KB

  • How to define IE-parameter EO_OUTBOUND_PARALLEL

    Hi,
    we are using PI 700, SP11.
    I have a file-receiver adapter in my scenario and I wanna define the IE-parameter
    EO_OUTBOUND_PARALLEL
    for this receiver with a value of "1".
    The reason is, that adapters of the j2ee-engine work serial and so a parallel outbound queue is not necessary.
    I read, that I have to define it in SXMB_ADM:
    Tuning / EO_OUTBOUND_PARALLEL
    with a subparameter = ???
    How can I define this subparameter?
    I tried to define it via sender/receiver-ID , but it doesn't work.
    Please help.
    Thanx
    Regards
    Wolfgang

    Hi Wolfgang,
    wollte nur Bescheid geben, dass ich das auch nicht weiss
    Gruss Mario

  • How to define sequence parameter by default as 'Use Default'

    Hello
    Is there a way to define sequence parameters so, that in every instance of this sequence the default checkmark of the parameters is set to 'Use Default' ?
    If this is possible is it only for all parameters of an sequence, or for can it be changed for any of the parameters individualy.
    Thanks
    Olli

    Dear Olli
    I don't think there's a way of automatically checking the "Default" option for several sequence parameters. You will have to do it for each item individually.
    Best regards
    Philipp Roessler

  • How to find export statement for Import statement ?

    hi experts,
    I am having an IMPORT....from memory ID  statement in my program.
    how could i find the location of EXPORT ...to memory ID statement for the IMPORT statement.
    Pls help
    saravanan.

    Not possible if you are just trying to find it without knowing the links between your program and the other programs. You have to know all the objects that relate to the process that your program is automating and then you can probably dig into those related programs to see if there is an EXPORT statement there. But it is not as simple as double clicking on the IMPORT statement or doing a WHERE-USED on the memory ID.

  • Dump while executing class method whose exporting parameter  of type table

    hi,
    i am getting dump after executing a method in which i want to export an internal table which will hold all the states name along with its code on the basis of the country name which is my importing parameter.
    for the above i am using importing parameter named as country of type too5u-land1 and the exporting parameter named as itab of type table and below is my code for the requirement.
    method PROCESS.
      select BLAND BEZEI from T005U
             INTO TABLE ITAB WHERE
             LAND1 = COUNTRY.
    endmethod.

    Hi,
      Please check the below code
    parameters country type land1.
    *Refer the class which we are using like below
    data: a type ref to ZCL_TX_SERVICE_01.
    data itab type ycountry.
    *ycountry is a table type defined in dictionary with fields BLAND and BEZEI
    data wa like line of itab.
    *If we are using instance method we need  to create the instance like below
    create object a.
    *In the method process define exporting parameter itab as type ycountry which is a table type already defined
    CALL METHOD a->PROCESS
      EXPORTING
        COUNTRY = country
      IMPORTING
        ITAB    = itab.
    loop at itab into wa.
    write:/ wa-bland.
    endloop.
    Regards
    Dande

  • Importing internal table data from FM to eCATT test script

    Hi all,
    I am working on Workflow project where by i need to post invoices related to purchase orders sent as scanned imaages. Incase all the data in the incoming invoice(scanned) is correct then i am using BAPI_INCOMING_INVOICE_CREATE to post the invoice.
    But when the data is wrong, i need to give the user MIRO transaction pre-populated with the invoice details so that he manually corrects them(after verification) and posts the invoice.
    I understand MIRO is an ENJOY transaction hence BDC doesn't work properly(i have tried with all kinds of options on recording and the problem comes incase of multiple POs) hence i choose to use eCATT.
    The recording worksfine but my real problem is the PO data (multiple PO details for same invoice) is in table form. In all my previous objects related to eCATT we used to upload the file, hence no problem of importing tables.
    But now as i'll call this test script from a function module which has all the POs in the form of internal table, i need to import this into my test script.
    Please any body tell me how to proceed in this case or please suggest me a better a way to record the MIRO.
    Thank you,
    Lakshmi Narayana.S

    Hello Raj,
    First of all thank you for your inputs.
    Yes, I know about Parking an invoice. even i am using it in some scenarios.
    If everything on the invoice matches with the values in SAP then i am posting it using BAPI invoice_create also.
    But for some scenarios like if the PO on the invoice doesnot match with actual PO then i need to create a work item in the Accounts Payable user's inbox and he will change invoice data manually (after getting confirmation and correction) and post it using MIRO.
    Here i need to pre-populate the MIRO with the invoice data so that he can correct and post it.
    Hence i was trying to write a BDC and as MIRO is an Enjoy transaction i thought writing a BDC is not a good idea (i tried writing BDC but had problems) hence i am using eCATT.
    Hope i am clear about my problem. Any inputs to solve this are welcome.
    Thanks,
    Lakshmi Narayana.S

  • ABAP for Super Dumps: Import- & Export-Parameter for a Table in a FM

    Hello ABAP Profs,
    sorry I am BW.
    <b>Import- & Export-Parameter for a Table in and out of an Function Modul.</b>
    I want to import a table into a Function Module, change it and export it again.
    How do I have to define the Import- and Export- Parameters in the FM ?
    The table looks looks this:
    DATA: zvpshub_tab TYPE SORTED TABLE OF /bic/pzvpshub WITH UNIQUE KEY
    /bic/zvpshub objvers /bic/zvpsoursy INITIAL SIZE 0.
    Thanks a lot
    Martin Sautter

    Hi Clemens,
    <u>in SE11</u> I defined a datatype of Type Structure: ZVPSHUB_ROW.
    <u>in SE11</u> I defiend a datatype of Type Tabletype: ZVPSHUB_TAB,
    bases on Rowtype ZVPSHUB_ROW.
    <u>in SE 80</u> I creates an FM with a CHANGEING Parameter referencing ZVPSHUB_TAB:
    FUNCTION ZVP_SHUB_TAB_LOAD.
    ""Lokale Schnittstelle:
    *"  CHANGING
    *"     VALUE(SHUB_TAB) TYPE  ZVPSHUB_TAB
    <u>in RSA1</u> in BW in the Startroutine of the Upload Rules in defined the table:
    DATA:shub_tab          TYPE zvpshub_tab.
    <u>in RSA1</u> in BW in the Startroutine of the Upload Rules in defined the table:
    DATA:shub_tab          TYPE zvpshub_tab.
    <u>in RSA1</u> in BW in the Startroutine i called the FM
    CALL FUNCTION 'ZVP_SHUB_TAB_LOAD'
        CHANGING
          shub_tab = shub_tab.
    and it works ..
    Thank You
    Martin Sautter

  • How is it that in an FM an EXPORT  parameter is passed by value?

    Q]      How is it that in an FM an EXPORT  parameter is passed by value?

    Hi,
    You can specify the types of interface parameters in function modules in the same way as the parameter interfaces of subroutines. Since function modules can be used anywhere in the system, their interfaces can only contain references to data types that are declared systemwide. These are the elementary ABAP data types, the systemwide generic types, such as ANY TABLE, and types defined in the ABAP Dictionary. You cannot use LIKE to refer to data types declared in the main program.
    Import parameters correspond to the formal input parameter of subroutines.  They pass data from the calling program to the function module.
    Export parameters correspond to the formal output parameters of subroutines.  They pass data from the function module back to the calling program (which his not possible in subroutines)
    To pass data back to the calling program, the function module needs an export parameter with the type of an internal table.
    Regards,
    Bhaskar

  • How to use internal table in Exporting Parameter of method.

    Hi Friends,
    I am new to abap oops and using the following code to read a select-option and pass the data in an internal table but on defining
    internal table of a standard  type it is giving me following error :
    ITAB is not an internal table - the OCCURS n specification is missing.
    code
    ====
      class lcl_get_details DEFINITION.
        PUBLIC SECTION.
          types : r_carrid type RANGE OF sflight-carrid.
          data  : itab type STANDARD TABLE OF sflight.
          METHODS : get_data IMPORTING s_carrid type R_carrid
                             EXPORTING itab type sflight.
      ENDCLASS.   
    class lcl_get_details IMPLEMENTATION.
      METHOD get_data.
        select *
        from sflight
        into table itab
        where carrid in s_carrid.
        if sy-subrc eq 0.
          sort itab by carrid.
        endif.
      endmethod.   
    ERROR : ITAB is not an internal table - the OCCURS n specification is missing.
    Kindly help.

    Hi,
    I think your problem is, because you use 2 variables named ITAB in method get_data.
    Instance-variable ITAB is defined as STANDARD TABLE OF sflight.
    Exporting-parameter ITAB is defined as sflight.
    It seems like in implementation of get_data exporting-parameter ITAB is used.
    Try this implementation:
    METHOD get_data.
      select * from sflight into table me->itab
       where carrid in s_carrid.
      if sy-subrc eq 0.
      sort me->itab by carrid.
      endif.
    ENDMETHOD.
    This should solve your compiler error.
    Nether the less, get_data will yield an empty structure as result.
    Regards, Hubert
    Edited by: Hubert Heitzer on Feb 24, 2010 10:22 AM

  • How to pass select-option filed to Function Module Exporting Parameter

    Hi,
        How to pass select-option filed to Function Module Exporting Parameter.
    Thanks

    Hi,
    DATA: BEGIN OF ITAB5_WRK OCCURS 0,
            KUNNR     TYPE KNKK-KUNNR,  "CUSTOMER #
            SBGRP     TYPE KNKK-SBGRP,  "CREDIT REP
            KLIMK     TYPE KNKK-KLIMK,  "CREDIT LIMIT
            NAME1     TYPE KNA1-NAME1,  "CUSTOMER NAME
            SKFOR     TYPE KNKK-SKFOR,  "TOTAL A/R
            AMT1      TYPE KNKK-SKFOR,  "CURRENT
            AMT2      TYPE KNKK-SKFOR,                          "01-30
            AMT3      TYPE KNKK-SKFOR,                          "31-60
            AMT4      TYPE KNKK-SKFOR,                          "61-90
            AMT5      TYPE KNKK-SKFOR,                          "91-120
            AMT6      TYPE KNKK-SKFOR,                          "OVR 120
            BZIRK     TYPE KNVV-BZIRK,
          END OF ITAB5_WRK.
    SELECT-OPTIONS P_COMP     FOR  T001-BUKRS
      SELECT KUNNR SBGRP  FROM KNKK
             INTO TABLE ITAB5_WRK
             WHERE SBGRP IN P_REP
               AND KUNNR GE '0001000000'
               AND SKFOR NE 0.
      LOOP AT ITAB5_WRK.
        DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
      ENDLOOP.
      PERFORM GET_CREDIT_LIMITS.
    *=======================================================================
      IF P_DIST NE SPACE.
        LOOP AT ITAB5_WRK.
          SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                      AND VKORG EQ P_COMP
                                      AND VTWEG EQ '20'
                                      AND SPART EQ '10'
                                      AND BZIRK IN P_DIST.
          IF SY-SUBRC EQ 0.
            MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
            MODIFY ITAB5_WRK.
          ELSE.
            DELETE ITAB5_WRK.
          ENDIF.
        ENDLOOP.
      ENDIF.
    *==============================================================
      LOOP AT ITAB5_WRK.
        MOVE: 'F/S'            TO WRK-KKBER,
               ITAB5_WRK-KUNNR TO WRK-KUNNR.
        PERFORM AGING.
        ADD: W_SNFAE  TO ITAB5_WRK-AMT1,
             W_SFAE1  TO ITAB5_WRK-AMT2,
             W_SFAE2  TO ITAB5_WRK-AMT3,
             W_SFAE3  TO ITAB5_WRK-AMT4,
             W_SFAE4  TO ITAB5_WRK-AMT5,
             W_SFAE5  TO ITAB5_WRK-AMT6,
             W_SFAEL  TO ITAB5_WRK-SKFOR,
             W_SNFAE  TO ITAB5_WRK-SKFOR.
        MOVE: 'SPEC'            TO WRK-KKBER,
               ITAB5_WRK-KUNNR TO WRK-KUNNR.
        *PERFORM AGING.*
        ADD: W_SNFAE  TO ITAB5_WRK-AMT1,
             W_SFAE1  TO ITAB5_WRK-AMT2,
             W_SFAE2  TO ITAB5_WRK-AMT3,
             W_SFAE3  TO ITAB5_WRK-AMT4,
             W_SFAE4  TO ITAB5_WRK-AMT5,
             W_SFAE5  TO ITAB5_WRK-AMT6,
             W_SFAEL  TO ITAB5_WRK-SKFOR,
             W_SNFAE  TO ITAB5_WRK-SKFOR.
        MODIFY ITAB5_WRK.
      ENDLOOP.
    FORM AGING.
      *CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'* 
      EXPORTING
          BUKRS             = P_COMP           
          KKBER             = WRK-KKBER
          KUNNR             = WRK-KUNNR
          RASID             = 'FEND'
          KLIMP             = 'X'
        IMPORTING
          SFAE1             = W_SFAE1
          SFAE2             = W_SFAE2
          SFAE3             = W_SFAE3
          SFAE4             = W_SFAE4
          SFAE5             = W_SFAE5
          SFAE6             = W_SFAE6
          SFAEL             = W_SFAEL
          SNFA1             = W_SNFA1
          SNFA2             = W_SNFA2
          SNFA3             = W_SNFA3
          SNFA4             = W_SNFA4
          SNFA5             = W_SNFA5
          SNFA6             = W_SNFA6
          SNFAE             = W_SNFAE
        EXCEPTIONS
          NO-AGING_SCHEDULE = 1
          NO_TABLE_INPUT    = 2.
      CASE SY-SUBRC.
        WHEN 1.
          MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
        WHEN 2.
          MESSAGE E999 WITH 'DO NOTHING ??'.
      ENDCASE.
    ENDFORM.                    "AGING
    Thanks

  • How could Ecatt support a FM which has export parameter data type as any

    Hi,
    I have created a FM which has export parameter data type as 'Type ref to data'.
    The actual paremeter value for this export parameter is a dynamically generated internal table, which does not have a abap dictionary data type.
    Could I use the 'FUN' ecatt command to test this FM?  How could I get this reference export parameter?
    Thanks a lot in advance!

    Hi,
    Wouldn't it be enough if you define parameter in test data container as reference to table type with structure of type c(1000)  (or more/less characters depending on how much data you need to pass)?
    I'm not 100% sure if filling this table with data will work (this is reference after all) but if this is an issue than create 2 parameters: 1 of table type and second of reference type. Then inside your script before FUN use ABAP...ENDABAP to assign your table parameter to reference parameter and use second one as input for FUN command.
    I think that either first or second solution should work.
    Best regards
    Marcin Cholewczuk

Maybe you are looking for

  • How can i permanently stop getting "no sender" emails on my iPhone?

    i have been getting "no sender" messages almost every day through my .me account on my iphone. the only way to get rid of them is to go into settings on that account and turn the mail off and then back on. There must be a better way to have things se

  • Problem Bug With My Ipod 30Gb Black (5.5g)

    Hello everybody j'ai un ipod 30gb black (5.5gb) et j'ai un petit problem pour les vidéos j'ai a peux pres 40 clips vidéo donc je lance une pour regarder et apres si je mets une autre ou encore une autre ca bloque et je suis obliger de cliquer sur Cen

  • What is the maximum number of rows in version 3.5.3

    I am using Numbers v3.5.3 in Yosemite. I need to copy/paste from a .txt file 1,085,300 lines of information. Numbers will only accept !65,000 lines. Is there a limit by default?  Can that be extended? Thank you.

  • White on Black Settings causes all pictures to look like negatives

    Hi, I was changing some settings on my iphone. When I changed the accessibility settings "white on black" --> On, the photos in my album started looking like negatives.. so did all the default wall papers. When I switch back to the "white on black "-

  • Photoshop Elements 8 - extend it's capabilities?

    I recently had to purchase elements 8 to replace PS 7 which no longer works on 10.5. Since there is no upgrade path from PS7 to CS4, I bought the lesser application Photoshop elements 8. I remember reading that there is an expansion type pack to add