How to define the application parameter 'sap.xss.BaseConfigurationID'

Hello All,
I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
Thanks a lot.
Regards,
Seshu.

Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie

Similar Messages

  • How to define the application to use for opening each file type (pdf, jpg,...)

    I installed an external application, and this new application has been configured by defect that it will be used to open all files with extensions like jpg, pdf, etc...
    I want to revert this situation and define again the proper application I want to use for opening each file type. How can I do this in Lion?
    Thanks,
    Azaldier

    Pick a representative file.
    Get info. (Command-i)
    There you will see a place "Open with" where you can select the application for that file.
    Hit the "Change all..." button to do this for all files of this type.
    charlie

  • Application Parameter sap.suspendable.application

    Hello
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/102ed591-62a6-2910-94ac-e6038ef7b76e |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/102ed591-62a6-2910-94ac-e6038ef7b76e] describes that the application parameter sap.suspendable.application defines a Web Dynpro application explicitly as suspendable is to define a specific application property named sap.suspendable.application. Possible values are true or false. Not defining this parameter means that the application is not suspendable.
    This works fine for Web Dynpro Java applications but seems not to work for WD ABAP applications. Is this correct? Does seomeone of you have the same experience or an alternative?
    I found this alternative: [suspend & resume calls|http://help.sap.com/saphelp_nw04s/helpdata/en/45/19bf8c16f25d7ae10000000a11466f/frameset.htm]
    Greetings, Mathias

    -

  • How to define the size of private folder in Easy DMS?

    Hi,
    I have to ristrict the user to keep  the data in private folder after the maximum limit
    please help me how to define the private folder size in easy DMS.
    after the limit user is not able to keep data in private folder.

    Hi,
    This can be done in SAP Customization / SPRO
    Pl. check :
    Cross-Application Components>Document Management>Control Data>Define Document types
    Here the size limit can be defined.
    Also check : http://scn.sap.com/community/plm/document-management/blog/2014/06/20/how-to-create-dir-and-document-type-in-dms
    Hope this helps
    Regards,
    Remi

  • UJQ_RUN_RSDRI_QUERY: how to define the scope?

    Hi,
    I'm going to use UJQ_RUN_RSDRI_QUERY in a BADI in order to retrieve data from another application. It seems easy to use. But how to define the scope of the retrieved data, i.e. how to define the content of the it_sel parameter.
    thanks for your help,
    Romuald

    This is a selection table which contains the DIMENSION name and the selection options.  Here is how to fill the table. For example, say you wanted to select on only JAN.2012 for a certain account.
      clear ls_sel.
      ls_sel-dimension = 'ACCOUNT'.
      ls_sel-sign = 'I'.
      ls_sel-option = 'EQ'.
      ls_sel-low = 'CE40041000'.
      insert ls_sel into table lt_sel.
    clear ls_sel.
      ls_sel-dimension = 'TIME'.
      ls_sel-sign = 'I'.
      ls_sel-option = 'EQ'.
      ls_sel-low = 'JAN.2012'.
      insert ls_sel into table lt_sel.
    Cheers,
    Rich HEilman

  • Changing the Application Parameter in the mass copied iviews

    Hi,
    I have copied the standard package iviews,pages,roles to a custom folder.Now I want to change the "Application Parameter" of the all copied iviews.Is it possible to do the mass change of a single parameter in all the copied iviews?
    If possible,please suggest how to achieve the same.
    Thanks,
    Rajani

    Hi,
    Yes, you can use the Multiple Property Replacement feature : [Multiple Property Replacement|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0f/764b87dfb948fcb13fd7695e157892/frameset.htm].
    Regards,
    Pierre

  • How to define default element in SAP-Script?

    Hi Guys,
    How to define default element in SAP-Script?
    Can you tell me to do this...is it possible in all the windows or only in main window?
    Regards,
    GURU

    Hi,
    Welcome to SDN
    You can't post ur questions in other's threads .Open a new thread.
    click on post new thread and open new thread.
    Regards

  • In OBIEE 11G, how to get the special parameter created by JAVA?

    Hi Experts,
    In OBIEE 11G, how to get the special parameter created by JAVA?
    For example:
    In JAVA , it has set one parameter named 'test'.
    So how to get the parameter in filter area in OBIEE?

    Hi Kobe,
    No P2 holds the parameter name like PresentationTable.ColumnName, in your form you may go for complete name or just column name and before submitting the form you can define the Action url.
    I would suggest to read section 6.3.2.1.
    ex:
    <SCRIPT LANGUAGE="JavaScript">
    changeAction(url) {
    var TestVar = form.inputbox.value;
    document.this_form.action="saw.dll?Go&Path=/Shared/Test/SB2&Action=Navigate&P0=1&P1=like&P2=Customers.Region&P3="+TestVar;
    </SCRIPT>
    </HEAD>
    <BODY>
    <FORM NAME="myform" ACTION="" METHOD="GET">Enter something in the box: <BR>
    <INPUT TYPE="text" NAME="inputbox" VALUE=""><P>
    <INPUT TYPE="button" NAME="button" Value="Click" onClick="changeAction(this.value)">
    </FORM>
    If helps pls mark.
    Edited by: veeravalli on Oct 24, 2012 10:25 AM

  • How to retrieve the data from SAP-BAPI by using VB Code

    Hi ,
    I am new to BAPI.
    V have created an application in Visual Basic with the following fields
    EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
    We have written the code for SAVING the data into SAP. Already we have
    constructed a table with the respective fields in SAP.
    For that we ourself created our own BAPI Structure / Function Group /
    Function Module/ Business Object - RELEASED related elements.
    1)Established the connection successfully.
    2)Stored the data into SAP Successfully and v r in need of
    3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
    Following is the code :
    'BAPI Structure  : ZBAPIEMP
    'Function Group  : ZBAPIEMP
    'Function Module : ZBAPI_EMP_CREATEFROMDATA
    'Business Object : ZBAPIEMP
    'Function Module : ZBAPI_EMP_GETLIST
    Dim bapictrl As Object
    Dim oconnection As Object
    Dim boEmp As Object
    Dim oZEmp_Header As Object
    Dim oImpStruct As Object
    Dim oExpStruct As Object
    Dim oreturn As Object
    Dim x As String
    Private Sub Form_Load()
    Set bapictrl = CreateObject("SAP.BAPI.1")
    Set oconnection = bapictrl.Connection
    oconnection.logon
    Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
    Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
    Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
    End Sub
    Private Sub cmdSave_Click()
        oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
        oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
        oZEmp_Header.Value("ADDR1") = txtAddr1.Text
        oZEmp_Header.Value("ADDR2") = txtAddr2.Text
        oZEmp_Header.Value("CITY") = txtCity.Text
        oZEmp_Header.Value("PHONE") = txtPhone.Text
        boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
        x = oreturn.Value("Message")
        If x = "" Then
            MsgBox "Transaction Completed!..."
        Else
            MsgBox x
        End If
    End Sub
    Private Sub cmdView_Click()
    End Sub
    COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

    I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
    -Tim
    Option Compare Database
    Dim SAPLOGIN As Boolean
    Dim FunctionCtrl As Object
    Dim SapConnection As Object
    Sub SAPLOGOUT()
    On Error GoTo LogoutFehler
        SapConnection.logoff
        SAPLOGIN = False
    Exit Sub
    LogoutFehler:
        If Err.Number = 91 Then
            Exit Sub
        Else
            MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
        End If
    End Sub
    Function SAPLOG() As Boolean
    'Verbindungsobjekt setzen (Property von FunctionCtrl)
       Set FunctionCtrl = CreateObject("SAP.Functions")
       Set SapConnection = FunctionCtrl.Connection
    'Logon mit Initialwerten
       SapConnection.Client = "010"
       SapConnection.Language = "EN"
       SapConnection.System = "PR1"
       SapConnection.SystemNumber = "00"
       'SapConnection.Password = ""
       SapConnection.GroupName = "PR1"
       SapConnection.HostName = "168.9.25.120"
       SapConnection.MessageServer = "168.9.25.120"
         If SapConnection.Logon(0, False) <> True Then  'Logon mit Dialog
             Set SapConnection = Nothing
             DoCmd.Hourglass False
             MsgBox "No connection to SAP R/3 !"
             SAPLOGIN = False
             SAPLOG = False
             Exit Function
          End If
        SAPLOG = True
    End Function
    Function MatDescr(MatNr As String)
    Dim func1 As Object
    Dim row As Object, X As Integer, ErsteNr As String
    Dim DatensatzZähler As Long
    Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
        If Not SAPLOGIN Then
            If Not SAPLOG() Then
                MsgBox "No connection  to SAP !", 16
                SAPLOGOUT
                Exit Function
            End If
        End If
    ' Instanziieren des Function-Objektes
    Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
    ' Export-Paramter definieren
    func1.exports("MATNR") = MatNr
    func1.exports("SPRAS") = "EN"
    DoEvents
    If Not func1.call Then
        If func1.exception <> "" Then
            MsgBox "Communication Error with RFC " & func1.exception
        End If
        DoCmd.Hourglass False
        SAPLOGOUT
        Exit Function
    Else
      MatDescr = func1.imports("MAKTX")
    End If
    If MatDescr = "" Then
        MatDescr = "PART NO. NOT FOUND"
    End If
    End Function

  • How to give the application server file path in the module pool programming

    Hi,
         Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.
      For eg I have imported a logo name ‘owens’ into sap system by using transaction ‘se78’; now I need to call the path in the below url,
    if container2 is initial.
    CREATE OBJECT CONTAINER2
      EXPORTING
        CONTAINER_NAME              = 'PICTURE_CONTAINER2'.
    CREATE OBJECT PICTURE2
      EXPORTING
        PARENT = CONTAINER2.
    CALL METHOD PICTURE2->SET_DISPLAY_MODE
      EXPORTING
        DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
      EXCEPTIONS
        ERROR        = 1.
    CALL METHOD PICTURE2->LOAD_PICTURE_FROM_URL
      EXPORTING
        URL    = " ? "
      EXCEPTIONS
        ERROR  = 1
        Others = 2.
    endif.
    Thanks in advance
    Deepu

    hi Deepu,
    Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
    Regards,
    Santosh

  • How to find the webclient in SAP MDM server

    How to find the webclient in SAP MDM server
    Thanks In Advance
    GuruvaReddy

    Hi Guruva,
    If you are talking about MDM APIs, then you will get them from Service place when you download the complete MDM 5.5 Suite. You need to choose the API which is appropriate to you. MDM comes with 2 different APIs - Java API and COM API as of SP1(The news is.. ABAP API is under development).
    Pre-requisite for building applications using Java APIs is basic Java skills.
    Regards,
    Rajani Kumar K

  • Please advice on how to remain the font in SAP

    Hi,
    Please advice on how to remain the font in SAP as Arial monospaced instead of its auto change to Chinese character.
    At the same time, pls advice the correct forum i should went as this is related to the Basis and i could not find out Basis Forum.
    Thanks.
    Best Regards,
    Joo

    Hi,
    when i went to the SAP Menu page right
    Below is the Menu list
    ==>Office
    ==>Cross-Application Components
    ==>Logistics
    ==>Accounting
    ==>Human REsources
    ==>Information Systems
    ==>Tools
    Over here, does not have "Setting". Pls advice.
    Thanks.

  • How to define the default activity for an unbounded task flow?

    In the new "Fusion Developer’s Guide for Oracle Application Development Framework 11g Release 1" documentation at the bottom of page 14-3 it states "An unbounded task flow .... contains a default activity, an activity designated as the first to run in the unbounded task flow, because an unbounded task flow does not have a single point of entry."
    What I can't find is how to define the default activity in an unbounded task flow and where this is recorded? Can we set this via the task flow diagrammer, and which configuration file is it stored?
    I note the first time I run the application with an unbounded task flow a dialog asks me which of the activities in the adfc-config.xml file to make the default, but I can't find where this is recorded.
    Anybody have any ideas?
    Thanks,
    CM.

    Chris,
    In fact this information is nothing that belongs into the taskflow meta data because unbounded taskflow have more than one entry point and there is no notion of default. Its a tools setting (JDeveloper) we had before
    Frank
    Message was edited by:
    Frank Nimphius

  • How to save the data to sap abap using Adobe Flex

    Hi Everybody......
    I am new to Adobe flex with sap abap.
          How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
    Please give me any suggisions on that.
    Thank you
    Venkatesh V

    Hi Venkatesh,
    Try with folowing coding...
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
         initialize="initApp()">
         <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
         <mx:TextInput x="108" y="21" id="txtAirline"/>
         <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
         <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
         </mx:DataGrid>
           <mx:Script>
              <![CDATA[
                   import mx.collections.ArrayCollection;
                   import mx.rpc.AbstractOperation;
                   import mx.rpc.events.FaultEvent;
                   import mx.rpc.soap.LoadEvent;
                   import mx.rpc.events.ResultEvent;
                   import mx.rpc.soap.WebService;
                   [Bindable] public var flightData:ArrayCollection;
        private var flightWS:WebService;
         private function initApp():void{
              flightWS = new WebService();
              flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
            flightWS.addEventListener(FaultEvent.FAULT,onWSError);
              flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
             flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
              flightWS.loadWSDL();
    private function getData():void{
              var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
              var input:Object = new Object();
              input.Airline = txtAirline.text.toUpperCase();
              operation.arguments = input;
              operation.send();
         private function onWSError  (event:FaultEvent):void{
         private function onWSDLLoaded(event:LoadEvent):void{
              btnGetData.enabled = true;
         private function onFlightWSGotResult(event:ResultEvent):void{
              flightData = event.result.SFLIGHT;
              ]]>
         </mx:Script>
    </mx:Application>
    Regards,
    Vinoth

  • How to define the margins of a leaf in numbers 3.2

    how to define the margins of a leaf in numbers 3.2
    leaves appear without margin and not when moving from one sheet to another

    Hi Ariel,
    Numbers 3 does not show margins in normal (edit) view. Some help with layout:
    Try Alignment Guides and Rulers as suggested here:
    Print View workarounds
    Use a layout guide:
    Layout Guide for Numbers
    If you previously had Numbers 2.3 (Numbers '09) it now lives in a folder called iWork '09 inside your Applications folder. It works just as well as it used to, and has a proper Print View.
    Regards,
    Ian.

Maybe you are looking for