How to delay the process?

Hi,
I am doing file to idoc scenario. When bulk of files came XI is picking all the files at the same point of time and sending to SAP system. In SAP system all IDOCs are not processing. So how to slow down the processing or how to make sequential processing.
regards,
Ansar.

Hi,
in this book you will find how to use EOIO (exactly once in order) for IDOCs
and also how to do pseudo IDOC queues in XI
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to get the process id of a sql statement or a session ....

How to get the process id of a sql statement or a session . ..?
Thanks

What about this?
SELECT pid
FROM v$session s, v$process p
WHERE p.addr = s.paddr
AND s.sid = :sid; -- replace :sid with your session idRegards.
Al

How to move the process chain from Unassigned node to a new node in 3.5?

Hi all,
I have created a new process chain in the development and it is falling under the Unassigned nodes. I want to move that process chain to an another node. but i am unable to do that
Can anyone let me know how to move the process chain from unassigned node. I have drag and dropped but still the same in BW 3.5 ?
Thanks
Poooja

Hello,
Try this....
Double click on your process chain. Via the menu select:
Process chain > Attributes > Display components
Select F4 (possible entries)
At the bottom of the window you will find a create icon
to make your own component.
After you created it, assign it to your process chain.
Don't forget to save the process chain.
Regards,
Sivaram

How to test the process chains

hi sap gurus,
Can anybody tell me how to test the Process chains before i load real time data,i run process chains every morning 6.15 am,before that i want to test every process is linked to another.
thanks in advance.

Hi,
Scheduling the process is the only way to check whether it is running fine or not. The process chains should be checked first in the Dev server and then in the QA server before transported to Prod.
You can also check the process chain using the "check" button to see if the processes are in the proper sequence or not.
There is a "log" button to keep track of the progress of the chain
suresh

How to delay the license days in XI-NW2004s?

I have successfully installed the XI-NW2004s,but only used in 30days.
I think I can adjust time back to setup day to use longer. To my disappointed, there were many j2ee service failed in Visual J2EE administrator.
How to delay the license days in J2EE service ?
Can I install a temp license in Tcode "slicense" just like Minisap developer?
Thx !
points will be award !
best regard!

Hi Raymond,
You need to make sure that the date to which you are changing should be greater then the date of installation. why don't you try this
1.Use SU01 transaction to find the date when the user was created.
2. Now change the system date to that particular date or one day greater.
Make sure all the instances of 2004's are down before changing the system date.
once done restart the system.
That should work.....
Regards
Gopi

How to cancel the process in initiator of human task in 11g?

human task as the initiator of the process, by default there is only a SUBMIT button, how to cancel the process then?
if I just close the form, a task will still created in the task list, still in initiator step. what if I don't want this?
I tried to add an "CANCEL" output for this , if the output is CANCEL then go to then end activity, but seems it doesn't work. anyone got a better solution? thank you.

You should be able to use the "Withdraw" action for this - available from the task Actions button/drop down on the human task form.

How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

Folks,
How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
Thank you.

Hi,
You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
Regards,
Priya

How to know the process chain start time & end time?

HI all .
how to know the process chain start time & end time at the table level as well as in RSPC level .
regards,
Srinivas

Hello,
there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
but the thing is you have to provide name of the process chain with the date at which it was executed.
another option is - you can double click on start process and on the last process of the chain.
here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
Hope this will help you.

How to know the process chain start time and end time

Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PM

Hi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai

How to kill the process chain

hi,
I have question how to kill the process chain during running.
thank you.

Hi
If the process chain is running in background,
goto SM37
Give * in the jobname
Give the username who scheduled the process chain
Job status - check the check boxes - SCHED, relased, ready, active
click execute.
It displays all the process chains that, scheduled & running.
You can select the process chain that need to be stopped & click STOP active job or ctrl+F1.
Hope this helps!
Kindly award points for all useful answers.
If you post the BW related queries in the BI general forum, you will get more answers.
Best regards,
Thangesh

How to schedule the process chain

hi
guys,
how to schedule the process chain to run on thirsday and friday b/w 8pm to 11:55pm which has already been scheduled for daily loads at 9am to 11am?
(Tell me the answer in detail)
your regards
suresh

Hi Suresh,
If you want to change in the Production system, you may not have the Authorizations. If you have authorization;
1. Goto RSPC-->double click on the Process chain
2. double click on the Start variant of the process chain-->Click on the EDIT button
3. Click on the CHANGE SELECTIONS then click on the DATE/TIME Tab;
4. There pls give from which date this process chain has to run to with your requirement time,
then give the time and select the periodic job and select with your requirement.
Save and exit.
It is done!!
Hope you understood.
Regards,
Ravi Kanth

How to schedule the process chain fr the report

hai experts,
i have a query which i need to generate for every five hours? i know that we can generate the report thr process chain but i dont know how to build that..
my question is how to schedule the report,how to build the process chain,....
can any one plz tell me how to start this generating report for every five hours
thanks in advance..points will be alloted surely ,i need this urgently..
Suri

First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Also, have a look at this links to make urself clear about the steps in creating Process Chain.
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
Hope it helps.
Regards,
Archna

How to get the process chain name if we know the data target in sap bi

Hi SAP BI Gurus,
Can any help me how to find the process chain name if we know the data target name
i mean if i know the info cube name how to find the relavant process chain which is holding that info cube
Thanks,
Joe

Hi R Kumar,
Check the table RSPCCHAIN.
I mean, Use Table RSPCCHAIN and give the local chain tech name in VARIANTE field and search, in out put you will get meta chain name under the field CHAIN_ID.
Thanks,
Sreehari.

How to delay the process?

Similar Messages

Maybe you are looking for