How to delete a line in smart forms

Hi all
i have data in my itab in following format
Month   1 2 3   4   5   6 7   total
nov      a   a a   a   a a a    7a
dec       P   A P   P A p A   4p
                                             3a
i have to print data from col month to 7 in main area of the table in smart forms but it shows the 3rd line as well(an empty extra line) . is there any way that i may be able to delete or truncate third line ? as i have to print total below some where.
Regards
Ammad

Hi Ammad
i have a solution to ur question.
well u only want to print a line in the smartform Main window table if u have data in the first field of ur internal table lets take name as T_FINAL.
So u want to print lines in Smartform if T_Final-Field1 (which for month) is not empty.
For this go to the Condition tab of the Line (ROW) inside ur MAIN AREA In TABLE which must be there in any window probably in the Main window.
Double click on the Line (ROW) in MAIN AREA, It will contain 2 tabs Output option and Condition.
Click On condition and write under FIELD NAME the field of ur internal table WA u r using in TABLE for eg T_Final-Field1 if its Internal table with header line or if u r using a separate Work area use the work area like WA_Final-FIELD1, then click on the Square button just in front of it to select an RELATIONAL OPERATOR , put there the RELATIONAL OPERATOR as "Not Equal to" and in the comparison value column write a space quoted with single quotation as ' '.
After u do this any line encountered with its first field of WA_FINAL i.e wa_final-field1as empty wont be printed.
This Reloves ur issue.
Regards,
Akash Rana

Similar Messages

How to draw vertical lines in SMART FORMS

Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
Ramesh

Hi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen

How to write source code in smart forms?

hi friends,
can anyone can help me in writing sorcecode in smartforms r
any materail link.
if it is helpful points can b rewarded.Thanks in advance.

Hi,
Check this link for
how to write source code in smart forms?
http://****************/Tutorials/Smartforms/GettingStarted/SimpleText.htm
You can write Source Code in smartforms By Choosing Program Lines.
Check this link with Screen Shots
http://****************/Tutorials/Smartforms/PO/page1.htm
Reward All Helpfull Answers
Regards
Fareedas
Edited by: Fareeda Tabassum S on May 21, 2008 3:09 PM

How to delete a line in SAP Script

Hi,
How to delete a line in SAP Script.
Cheers
S Kumar

Okay.if still you are looking the option of deleting line there is one solution.
Just delete the all contents of perticuler(which needs to deleted) line including the tag column(Where you are /*) and save.if you see again than line would not be seen as blank,you will found it has been deleted.

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly n

Is it possible to create a single texbox? and how to delete a button on a form? please asap, badly needed it right now. thx -regards gustavo

Hello Gustavo,
You can create a single textbox using the textbox option here (This is for you to enter text - not for the visitor): http://jingsite.businesscatalyst.com/jing/2013-09-30_2212.png
If you want to create a textbox for the visitors to enter text, then you need to enter a form, and you can delete the "message" field from the "simple contact" form, but not the name and the email fields (those are mandatory and can't be deleted).
You may want to check external forms in case you want to have the form rather customized, to check if you can have forms with single textbox. An example would be "Jotform".
Hope this helps.
Cheers
Parikshit

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

How to delete the line item from a sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

How to delete the line between the last point and first point?

How to delete the line between the last point and first point?
I want to draw a curve many times, from first point to the end point. and redraw from first point to the end point.But I hope update point by point. but between the end point and the first point, there is a line. How to delete the line?
the code is:
CNiReal64Vector plotData(50);
m_graph.ChartLength = 50;
//m_graph.ClearData();
for (int j = 0; j < 2; j++)
for (int i=0; i<50; i++)
plotData[i] = ((double)rand()/(double)RAND_MAX)*6 + 4;
m_graph.GetPlots().Item("Plot-1").ChartXY(i, plotData[i]);
Sleep(100);
Attachments:
20150605142608.png ‏31 KB

Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel

How do i place box in smart form

hi all,
how do i place box in smart form?please help.

write the following commands in ur text editor of the window for which u want to display the box...
POSITION WINDOW
SIZE WINDOW
BOX FRAME 10 TW
the code will automatically position and size the box according to the window size and position as placed in the screen painter...
reward if helpful
regards
niharika

How to delete blank page in smat form

Hi Expets,
In output display one extra blank page, how to delete it, I am using logic like this in smart form
Main Window
--> Header Loop.
       ---> Text
            ---> Table (item loop)
                   ---> Command Line
In output it display Document Number header and items in a single page. but last one blank page also display.
Regards,
Sreedhar.

hi sreedhar
check this
Re: Smart forms : display of second page .Displays blank when not required
it might be helpful to you
thanks
SAchin
Edited by: Sachin Gupta on Mar 5, 2009 10:18 AM

Need to draw line after the 2nd line item(Smart Forms)

Dear Friends,
I need to draw horizontal line after the 2nd line item and 3rd line item in smart forms.How can i achive this.
Plz help.
Edited by: farook shaik on May 19, 2009 8:19 AM

This is what you need to do:
1> In the tables->details section define two line types LT1 and LT2.
2> Come back to tables section pressing the table painter button.
3> Select a line type for which you want to have an underline(say LT2).
     a] If the anchor cursor does not come click the draw lines and columns button( the pencil icon nutton)
     b] select the line type ( it will become black after selection. Press and hold down ctrl to select
         multiple cells.
     c] after selection click the lower 'frame button' ( which is right at the top of box and shading).
4> Now goto data section where you have given your internal table name and work area.
     a] in the sort criteria put your field POSNR and check the Event on Sort end chk box.
     b] you will see an extra node under the main area of the table.
     c] Create a table line with the line type LT2 in the node.
     d]Also in the Main area add another table line with LT1 as the line type.
5> If POSNR remains unchnged LT1 will be triggered.
6> if Posnr changes then LT2 will be triggered with the underline.
This will suffice your requirement.

How to get material number in smart form driver prog attached to MM01:NACE?

Hi,
I have attached driver program of smart form to MM01 usinfg nace.
On save smart form should get generated.
Can anybody guide me how to get material number from MM01 in driver program on saving MM01.
as of now am not getting values in smart form.
What additional lines to be coaded in driver program to get material number.
Thanks.

hi,
use nast table in your import paramaters of smart forms.
In the Nast table you can find a field with object key which holds the Material Number.
Hope this helps.
Thanks,
subash

How to delete backorder lines?

hi experts,
i cancelled one sales order, this salesorder has 3 lines and i cancelled line by line and it came up at the end "order status = close" "lines status =cancelled" but one line stays in backorder that should not be stay there coz it has been cancelled. how delete that line in the backorder. i try to pick realease it and there nothing happen. just warning message that i cannot.

Do you have access to Oracle Support? If you enter a Service Request, they will provide the correct code to make sure everything is updated correctly - the delivery and everything else that is dependent on that. Updating on your own can be risky cause you may miss something that needed to be corrected.

How to delete the line for 300SAP* in table USR02 in SQL Management studio

Hello
I used to delete the line for 300SAP* in table USR02 in SQL Enterprise Manager. After I could log on with pass.
I wander how to delete it in SQL Management studio. When I expand tdatabase it takes so long time and it is uncontrollable

Hello,
you have to delete the row by a sql statement.
Open a new query and run a script like this:
use <Your SID DB> -- e.g. use PRD
setuser 'your sid in lowercase' --- e.g. setuser 'prd'
delete from USR02 where MANDT = '300' and BNAME = 'sap*'
go
Run a complete backup before deleting data manually.
Regards
Clas

How to delete a line in smart forms

Similar Messages

Maybe you are looking for