How to delete a PS network with status 'Technically Completed' (TECO)?
Dear all,
We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed' (TECO).
Thanks in advance.
Regards,
Vijay
The cluster goes out and finds all networks that are available. This is an automatic process. As long as there is a network there, it will show it. If you don't want it to show, disable the interface and it will disappear.
. : | : . : | : . tim
Thanks a million Tim! Disabling the correct interface made it disappear!
Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
However, here is the interesting thing:
After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
One observation:
If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
-Rajeev rajdude.com
Similar Messages
-
How to reverse/change SRM PO with status "transaction completed"
We use Extended Classic scenario in our company. There is a PO has outstanding G/R balance, but user accidently hit the button "complete"on this PO in SRM , in result the PO has been completed with status "transaction completed". And nothing can be performed on this PO.
G/R balance is out there and now it has financial impact as it blocked the funding thru internal order.
Anyone have idea how we can resolve this problem. Can we reverse/change the PO status? Please note G/R canu2019t be entered in ECC as restricted.
Thanks,
FriedaI think it was CRM_JEST. But the way to easily select the correct entries:
1. Go to transaction BBP_PD
2. Enter BUS2201 and the order number
3. Double click on the status table, this will take you to SE16 with all the different status for the PO
4. Select the entry to delete
5. Enable debugging by putting /h into the transaction field
6. Double click "CODE" and change this to "DELE"
7. F8 (leave debugging)
8. Click on the delete icon and save.
Done. -
How to delete multiple data domains with single step ?
how to delete multiple data domains with single step ?
You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup. -
How to extend an existing network with airport
How Do you extend a wireless network using two airports?
Please check out the following Apple Support article for details on how to extend a wireless network with multiple AirPort base stations.
-
How do i extend my network with a airport express
How do I extend my network with mt airport express
Hi Tesserax, I'd like to join this discussion. It seems Jasonbeyer didn't reply, but I have a question related to his.
I'd like to extend the wireless signal from my Cisco Model DPC/EPC2202 VoIP Cable Modem (802.11n) to the living room where, at the moment, it is non-existent. I assume there's inteference or the signal cannot reach through the concrete walls and rooms leading up from my bedroom to the living room.
My question is:
I'm thinking of extending my wi-fi signal by using the Airport Express and simultaneously using it to connect to my hi-fi to play iTunes from my bedroom's iMac.
Something's telling me it's not going to be that easy. I'm using an iMac (7,1) if that's any help or clue.
What are the things I should take note of and will Airport Express be compatible with my modem? Would I have to get TWO Aiport Express to bridge the signal to my living room?
Thank you everyone for your time. Cheers!
Kane -
does anyone know how to delete songs that came with the iPhone 6 in the music?? i tried deleting them from iTunes but i couldn't.
I know you already solved this but for future reference, there is also another setting to only keep songs downloaded to your device visible in music.
Go to Settings --> Music --> Show All Music and make sure it is turned off -
How to delete an old network from the list on the iPad?
Anyone know how to delete an old network from the listing and then add a new one? I did it when I first got my iPad and cannot remember how I did it! Hey, I'm an Apple rookie but I am trying. Take care and thanks in advance for any help.
Setting > General > Reset > Network Reset
-
How to create a wifi network with macbook.
How to create a wifi network with macbook? I dont have wifi for my itouch. I am trying to create a wifi through my macbook for my itouch. does anyone know how that works? thanks
Open the Sharing pane of System Preferences and enable Internet Sharing over AirPort.
(59391) -
Hi. I'm trying to make my guest network disappear from the list of network choices that appears to everyone in the neighborhood. Even though I followed the great suggestions on how to delete the network, it's still appearing in the list that everyone sees. It has my name and would prefer to get rid of it.
Please help! Many thanks!Thank you for not only the tip but also especially the research showing that for anybody other that those using Wi-Fi for the first time the network wouldn't disappear. I wanted it to disappear for everyone so.....I finally solved it by resetting the Airport Extreme to the factory settings and starting over from scratch! It worked! Yay!!!!!
So, for everyone that has had this problem (and I've read many of the same complaints in different places on the Internet), you must go into Airport Utility and check the box stating that you want to reset it to the factory settings. Do not do it with a paper clip and the reset button on the box; I tried that first and it did not work. You must reset it via the Airport Utility. Then just start over and you will have the choice to NOT check the box to Enable Guests. If you want to enable guests, just be sure not to use your name or you're back to the same problem. Apple is so great with everything...wouldn't it have been so easy for them to just put this in the manual somewhere????? Thanks for all your help. Hope this helps others! -
How to find out the projects with status "Invalid"?
I'm new to Oracle Projects -OP. We are on 12.0.4. This' my new job.
I have a task of "Remove projects with status 'Invalid' ".
Questions:
How to access the OP forms to verify the existent of the invalid projects?
What are the PA tables having the status info -- I mean those showing the status with 'Invalid'?
Thanks A lot.
an apps dbaI could not find a sample for the DELETE_PROJECT. I have coded the delete project by modifying the sample of the CREATE_PROJECT.
-- delete a project with the status INVALID shown in pa_project_statuses.project_status_name
--set serveroutput on size 20000
DECLARE
-- Variables needed for API standard parameters
l_api_version_number NUMBER := 1.0;
l_commit VARCHAR2(1) := 'F';
l_return_status VARCHAR2(1);
l_init_msg_list VARCHAR2(1) := 'F';
l_msg_count NUMBER;
l_msg_index_out NUMBER;
l_msg_data VARCHAR2(2000);
l_data VARCHAR2(2000);
l_pm_product_code VARCHAR2(10);
l_responsibiity_id NUMBER;
l_user_id NUMBER;
l_pm_project_reference PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
l_pa_project_id PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
API_ERROR EXCEPTION;
BEGIN
-- GET GLOBAL VALUES
select user_id, responsibility_id
into l_user_id, l_responsibiity_id
from pa_user_resp_v
where user_name = 'J23N'; -- need to get from Apps
--SET GLOBAL VALUES
pa_interface_utils_pub.set_global_info(
p_api_version_number => 1.0,
p_responsibility_id => l_responsibiity_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
-- PRODUCT RELATED DATA
l_pm_product_code := 'R_INVALID'; -- can be user defined
-- PRODUCT DATA (PROJECT_IN_REC_TYPE)
l_pm_project_reference.pm_project_reference := null;
l_pa_project_id.pa_project_id := 1001;
--INIT_CREATE_PROJECT
--pa_project_pub.init_project;
dbms_output.put_line('Before delete_project');
--DELETE_PROJECT
pa_project_pub.delete_project(
p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_pm_project_code => l_pm_product_code,
p_pm_project_reference => l_pm_project_reference,
p_pa_project_id => l_pa_project_id
-- Check for errors
if l_return_status != 'S'
then
raise API_ERROR;
end if;
dbms_output.put_line('Deleted Project Id: ' || l_pa_project_id.pa_project_id);
--dbms_output.put_line('Deleted Project Number: ' || l_project_out.pa_project_number);
Commit;
--HANDLE EXCEPTIONS
-- Get the error message that were returned if it did not complete sucessfully
EXCEPTION
When API_ERROR then
dbms_output.put_line('An API_ERROR occurred');
if l_msg_count >= 1
then
for i in 1..l_msg_count loop
pa_interface_utils_pub.get_messages(
p_msg_data => l_msg_data,
p_encoded => 'F',
p_data => l_data,
p_msg_count => l_msg_count,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('error message: ' || l_data);
end loop;
rollback;
end if;
When OTHERS then
dbms_output.put_line('An error occured, sqlcode = ' || sqlcode);
if l_msg_count >= 1
then
for i in 1..l_msg_count loop
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => 'F',
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('error message: ' || l_data);
end loop;
rollback;
end if;
END;Can anyone with the experience of PA_PROJECT_PUB make comment on this Delete Project block? On the struncture level is it correct?
I run it and get
pa_project_pub.delete_project(
ERROR at line 48:
ORA-06550: line 48, column 3:
PLS-00306: wrong number or types of arguments in call to 'DELETE_PROJECT'
ORA-06550: line 48, column 3:
PL/SQL: Statement ignored
Please make your comment on the structure (the logic) of the delete project before providing the advice on the debug.
I would like to make sure the logic is correct first.
TIA -
How to delete spool number if is status is waiting?
Seek helps. I use FUNCTION RSPO_R_RDELETE_SPOOLREQ to delete spool number. It works if this spool number's status is finished. But if its status is waiting, I find that the spool number is not deleted. Who can tell me how to delete such a spool number even though its status is waiting?
Thanks a lot.
JackHi Jack,
TSP0E-RQIDENT is a spool number that you want to delete.
Please ensure you have authorization/permission to delete.
Regards,
Ferry Lianto -
How do I extend a network with an AirPort Extreme from an Arris TG862?
I'm using Comcast as my ISP, and after some issues with a previous Motorola modem, they supplied me with an Arris TG862 Router/Modem combo tower. I have two AirPort Extremes, one of which was previously connected to the old Motorola modem to send wireless into the house, but it only reached halfway, so I had the other AirPort Extreme in the middle of the house to "catch" the signal and then broadcast it out to the rest of the house. This worked fine for a while.
But with the new TG862, it doesn't seem to be an option. From what I've read, if I have the TG862 in one room (connected to the cable), AirPort Extreme #1 in the middle of the house, trying to join the existing network (or extend it?), and AirPort Extreme #2 in the far end of the house (to extend from AirPort #1), it won't work. Apple's "extension" technology isn't compatible with all other modems or routers, and even if it was, I'd have to somehow configure the TG862 to "allow to be extended."
So my question is, IF there is a desktop utilizing the TG862 as a direct connection (because it has no built-in Wi-Fi), is it possible to put the TG862 into bridge mode, connect one of the AirPort Extremes and have it act as the router so I can use AirPort Extreme #2 to extend that network out to the rest of the house? I want to ensure the desktop still has a connection, but there's Wi-Fi that actually goes out through the whole house.
The connected-to-the-cable-desktop is a PC; we have multiple iPhones, iPads, and anywhere from 1 Mac laptop to 1 iMac in the house at any given time.pcbjr wrote:
Topic title pretty well sums up the question.
I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
So, can the Extreme act as an "extender" only, in lieu of using an Express?
Hiya.
You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage. -
How to delete a list-item with Contribute 4
I use Contribute for a lot of my client for years and a few
weeks ago i installed Contribute 4 for the first time for a new
client .We dicovered that it's difficult or impossible to delete a
list-item in a unordered list. Maybe also in other list-types but
we haven't tried this yet. Does anybody know how to delete a
list-item? In Contribute 3 you just had to use the backspace button
but that isn't working anymore.
Thanks for your help.
Maarten Strik
www.strikdesign.nlhttp://linesofcode.net/snippets/166
-
How to delete unwanted WiFi networks
I’m picking up 7 closed Wi-Fi networks in addition to my own. Periodically my wireless printer will somehow default to one of these other networks & I have to do a factory reset then input my network settings to get it working again. Is there a way to delete these other networks or at least prevent them from showing up? No settings I could find in Network, Airport Utility, Print & Scan or the printer’s configuration settings seem to allow me to do this.
If they are closed networks the printer could not connect to them.. it can only connect to open network if it doesn't have the passkey.
Unfortunately if people do not close their networks and password them, there is no way if their signal exceeds yours.. usually wireless will connect to the strongest signal of a known network or open one.
So live in a Faraday cage.. very effective.. See movie Enemy of the State.. the Faraday cage in the film was so effective the wireless microphones used by the actors would not work. ie they actually built the set properly to represent a paranoid person towards wireless survelliance..
http://en.wikipedia.org/wiki/Talk%3AFaraday_cage -
How to delete ALL 5000 + inbox with ONE step on iphone 6 ?
Any improvement on that specific issue, from previous models?
I really don't have patient or time to delete one by one 5000+ inbox e-mails!
I highly appreciate any help..
Thanks!
RItaTry this
Go to your Inbox folder
Tap on the "Edit"-Button on the top right
Select the first email in your list
Hold down the "Move" button
While you are still holding the "Move"-Button, deselect the first E-Mail
Put away all your fingers from the screen and wait a few seconds
Now Mail asks you where to move ALL of your emails
Select the Trash Folder as destination
From inside the Trash Folder, you can delete all items at once
I will have to find out where I got this from and edit. It does work, takes a little dexterity and patience.
Edit:
quickly looking this is one of the earliest references I have seen (2011)
http://www.jasonelk.com/2011/02/how-to-delete-all-your-mail-at-once-on-your-ipho ne-4/
Maybe you are looking for
-
Color a particular cell in ALV
Hi all, I am working with ALV using class cl_salv_table. i can colorize a particular colomn using cl_salv_column_table->set_color method. I was able to do it. I have done it for an amount column. Now I want to show the amount in some other color i
-
Error Patch IMPORT_PROPER phase
Dear support, We were applying patches on Netweaver 2004s Oracle 10.2.0.2 Windows platform server. Basis patch 12 and it was successfull in Test mode , but during standard mode suddenly machine got restarted because of power problem. Now database and
-
Dear Gurus, I am working on Transportation Module LE-TRA. I want to capture shipment cost of deliveries coming from different company code. The sending/manufacturing company makes a sales order against the receiving company purchase order and than do
-
Filevault won't recover disk space
I have filevault on on my macbook pro. When I shutdown, it usually recovers the disk space that is replaced from the files I deleted (when I emptied the trash), as it should. However, this is the second time that I've had this problem where, when I s
-
This is the error I'm getting.... I've pasted my password which is the same for incoming & outgoing.