How to delete a restricted key figure in a multiprovider

Hi all
I used transaction RSZC (for the first time) to copy over restricted key figures from and info provider to a multi provider.
This worked but somehow it copied over each restricted key figure twice.
I have right clicked on the ones I don't want and clicked on delete but it doesn't delete them.
any ideas ?
thanks in advance

Thanks to you all for your help
It was my fault, I had them in structures that I'd copied over so that's why it wouldn't let me delete them.
I found this out when I used RSZDELETE, thanks for that
Sandra

Similar Messages

  • How to Create a Restricted Key Figure in BO Webi Report

    Hi Experts,
    Please tell me How to Create a Restricted Key Figure in BO Webi Report.
    Thanks in Advance.
    Regards,
    Rafi

    Hi,
    1. Define a new measure in the designer.
    2. In the select clause give the reference to the key figure on which restriction to be applied.
    For example
    @Select(Key Figures\Number of Records)
    3. In the where clause, give the MDX expression for the filter to be applied.
    For example
    <FILTER KEY="[0PURCH_ORG].[LEVEL01]">
    <CONDITION OPERATORCONDITION="InList">
    <CONSTANT CAPTION="HAS"/>
    </CONDITION>
    </FILTER>
    Regards

  • How To Transport a Restricted Key Figures

    Dear all,
    can u plz tell me how to transport Restricted key figures for the first time.
    i mean shall i create new package or shall i use the existing package only?
    Regards
    venu

    Dear Venkat,
    In qaulity the sales value for a week is showing correctly where as in the production the sales value is showing only for one material that to in the -ve...we have so many materials....
    When i open a Query Designer in quality the system is giving a status message
    <b>[E865(RSO)]ERRORS: System is not set to Changeable - objects are not changeable</b>
    [<i>b]When i click the documetaion on the error message the following is appearing:</b></i>
    Errors: System is not set to changeable - objects are not changeable [E865(RSO)]
    Diagnosis
    You want to change objects although the system setting is "Not Changeable".
    System Response
    The objects cannot be changed.
    Procedure
    Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4.
    Venu

  • How to create Calculated/Restricted Key Figures in AO

    All,
    In our project we are consuming Bex Queries for AO Analysis. In these  we have lot of calculated/restricted key figures. In bex we can restrict 2 characterstics to one Keyfigure, So can we able to create calculated/restricted KF in AO
    Regards,
    John

    Hello Tammy,
    We are having a reqauirement in which we have 5 Bex queries built on the same infoporvider and we are trying to consolidate all the 5 queries to one single generic Bex query or two. So in AO we would like to consume this query and build different AO workbooks to meet all the old 5 queries requirement.
    So as part of this process, I would like to know can we create calculate/restricted KF's in AO , that way i can make a better decision to create them in Bex VS AO.
    Thanks for your inputs in advance.
    Regards,
    John
    Message was edited by: sunny johnson

  • How to find which Restricted Key Figures are using a specific hierararchy??

    HI Experts,
      I am updating a very important hierarchy which is used in many queries and in many Restricted key figures. Is it possible to find in which Restricted Key Figures this specific hierarchy is used??
    Thanks in advance.
    Meyling.

    Hi
    I was able to find a solution
    I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
    field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases. 
    When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
    year.
    Tom

  • How can we see restricted key figures in Portal

    Hello,
    We are using 0ANALYSIS_PATTERM template, when we use the "new analysis" and from the drop down at the top (view, query, infoprovider) when we choose the infoprovider as a cube for example (0PU_C02) we can see pretty much like a web version of query designer i guess, we can see all the objects. But is there any way the end user can see the restrcited key figures that are created in the query designer by BW developer, so that they can drag and drop their objects and create a report.
    It would be great to have this function.
    Thanks,
    Kiran

    Currently, this is not available. You could have a query that has all RKF as a starting point to achieve this. If you think this would be good to have by default, please log a development request on the OSS Messaging System.

  • Deleting Restricted Key Figures

    I've tried to delete a restricted key figure but after confirming that I do want to delete it, it still appears in the Restricted Key Figures list!
    Is there something I'm not doing?

    Hi,
    If you have got confirmation message that the KF has beed deleted and it is still showing in query designer, then Logoff from Bex and relogin and see.
    If you have not got any such message then check whether this RKF is used in some other queries and remove it from these queries and then delete it.
    Regards
    SS

  • Copy restricted key figures

    hi,
    how can i copy restricted key figure?
    thanx

    Hello Elif,
    it's not possible because it requires a tecnical name to a restricted or a calculated keyfigure which are cube level. This technical name should be given by you.
    Sarhan.

  • How to show filter values of restricted key figures in BEx Analyzer?

    Hi,
    I have following report.
                         Quantity USA        Quantity China
    Product           100                        150
    Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
    Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
    I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
    E.g.:
    Country          USA
                         Quantity USA
    Product           100 
    If I put both restricted key figures in the query, this line is not shown.
    Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
    Thanks!
    Regards,
    Pascal

    Hi,
    I have following report.
                         Quantity USA        Quantity China
    Product           100                        150
    Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
    Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
    I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
    E.g.:
    Country          USA
                         Quantity USA
    Product           100 
    If I put both restricted key figures in the query, this line is not shown.
    Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
    Thanks!
    Regards,
    Pascal

  • How to copy restricted key figures in query designer ?

    hi,
    i have created a query in query designer (BI 7.0).
    How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
    any ideas ?
    best regards, Martin

    Hi Martin,
    Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
    Hope that helps.
    Regards
    Mr Kapadia

  • How can we restrict Key Figure in the BI System

    Hi All,
    Can any one explain How can i restrict key figures in BI system.
    So when i create a query a specific user  can only execute it if a specific key figure is a part of query otherwise he is not allowed to execute a query.
    For Example:
    A user TEST123 is allowed to execute a query with keyfigure Quantity he is not allowed to execute the query if any other key figure is present in the query
    Regards,
    Deepak

    Hay Diogo,
    Bravo...
    Your suggetions always work for me. The scenario was that
    A user TEST_PLD08 should only allow to see output for the querys which consist of the keyfigure PLDQUACMP and not for other keyfigures while other user TEST_PLD07 is allowed to see the output for  querys consist of any of the keyfiguers.
    so I have assign a authorization profile  PLD_TEST07 to the user TEST_PLD08 with KeyFigures authorization as mentioned below and it is working fine
    I     EQ     :
    I     EQ     PLDQUACMP
    You can forward me more scenarios like this if you can think of more it will be really helpful for me
    Regards,
    Deepak

  • How to build Restricted Key figures in Universe?

    Hi All,
    I have been trying to find a way to build restricted key figures at BO universe level.
    I have gone through the best practices documents and the mdx syntax documents.
    Even though building Restricted key figures at universe level is not a recommended approach, we had a requirement to achieve it.
    I have tried the below possilbe ways but could succeed only half way.
    Please help me and others who has been trying to build the restricted key figures at universe level by guiding us.
    Eg: A restricted key figure A1 is based on a basic key figure A, with a restriction on cost element  C (detail object,cost element key)
    I have built A1 with below syntax and  could get correct result in web intelligence report
    Select block of  A1 measure object in designer
    <Expression>@Select(Key figures\A)</Expression>
    Where block of A1 measure object in designer
    <FILTER KEY="[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="ABCD/1234567"/></CONDITION></FILTER>
    But when I build another restricted key figure A2 out of basic key figure A with restriction on the same cost element key field but a different value like  ="ABCD/678910".
    Both A1 and A2 give correct results individually when they are dragged in a web intelligence query.
    But when both of them are required to be dragged in the same query , no result comes because of the conflicting where clauses,as cost element key can't have both values at same time.
    Then I tried building A1 in below ways, as mentioned in the mdx examples document
    Trial 1:
    Select block of  A1 measure object in designer
    <Expression>(@Select(Key figures\A),[0COSTELMNT].[LEVEL01].[[20COSTELMNT]].[Value].[ABCD/1234567])</Expression>
    Trial 2:
    Select block of  A1 measure object in designer
    <Expression>(@Select(Key figures\A),[0COSTELMNT].[ABCD/1234567])</Expression>
    Trial 3:
    Select block of  A1 measure object in designer
    <Expression>([Measures].[D787I2PW5YTGMTKL83RWBH80W],[0COSTELMNT].[ABCD/1234567])</Expression>
    All the above expressions parse OK at universe level. Trial 1 gives a database error while running the query.
    Trial 2 and Trial 3 nither throw any error nor return any result for A1.
    If any one has tried and succeeded in implementing restricted key figures at universe level,please provide us some inputs.
    Thank You.
    Naresh

    Hi,
    this seems to be identical to this one:
    Re: Condition Object for previous month data on current month input
    I would suggest you close one of them as two entries asking the same is not a good idea
    Ingo

  • How to make restricted key figure global  (There are same topics)

    Gurus,
    Sorry to post this question again but I was not happy with other topics answers. I am developing a SAP BSC (Balanced Scorecard) version 6.0. In order to generate results I need to use 'Calculated Key Figures' (SAP BSC does not read Restricted ones). No problem so far. However I have a query from the Controlling area of my company where all financial KPIs are restricted in Rows (right side of Bex) instead under 'Restricted Key Figures' area on the left panel. They are not global. It is a lot of them. My option, for while, is to recreated all of them on the left side and than transform them in 'Calculated Key Figures'.
    There is other way to 'move' these 'Selection' to make them global on the left side? This would save me two weeks.
    Kind Regards,
    Gilson Teixeira

    Hi,
    In Query Designer,in left panel....expand 'KEY FIGURES' tree and rght click on 'Restricted Keyfigures'--->new restricted KF.
    regards
    MR
    Message was edited by: M.R Sashi

  • Customer Ext Variable is NOT working correctly in the Restricted Key Figure

    Hi all,
       I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
        0CALMONTH  and it will be populated through  Customer Exit and it works fine.
        In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
        variable  passed the value of  range as '01/1996' to '04/2008' in RSRT.
        The properties of the variable are:
              Type of Variable -  Characteristic, Processing by - Customer Exit, Variable Represents - Interval
              and Variable is - Optional.
              No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
      This variable is used in Restricted Key Figure to calculate the number of matching records between
       01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
       But, there are records with 0CALMONTH between 01/1996 & 04/2008.   
       How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
       Thanks in advance.
    Regards,
    Venkat.

    Hi Clemens Li
    I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
    Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
    Hi Abhii
    I have given below the fieldcat coding.
    Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
        wls_fieldcat-col_pos   = wpv_pos.
        wls_fieldcat-fieldname = wpv_champ.
        wls_fieldcat-tabname   = wlc_tabname.
      wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
        wls_fieldcat-seltext_l = wpv_libelle.
        wls_fieldcat-ddictxt   = 'L'.
        wls_fieldcat-no_out    = wv_no_out.
        APPEND wls_fieldcat TO gt_fieldcat.
    Kind regards,
    Jegathees P.

  • Query Designer restricted key figures using a prompt value

    Hallo Experts,
    I would like to restrict key figures after user has beeen prompted to enter a date. I have 2 key figures:
    a) KF1, Date1
    b) KF2, Date2
    User should be prompted to select a specific date: e.g. 01/2011. After selecting/entering the prompted date value, it should be given to date objects for intance Date1=01/2011 and Date2=01/2011.
    How could I achieve it in Query Designer without using customer_exit function? Reason is that non-experienced users will use this report and they should not be confronted with complex query. Do you have any idea?  
    Many thanks
    Mamadu

    Hi,
    I assume that you need to restrict the value of keyfigures by date based on user input data on variable selection screen.
    First create one user input variable on your date field say for eg calday.
    Now restrict your KF1 with calday and choose that vairable which you created.
    For second KF2 which seems to me need to be restricted with offset of +1 based on the date entered by the user.
    So restrict this KF2 with calday and use the same variable with offset of +1
    I just misunderstood you ned calmonth or day because in requirement you have given month but you are calling it as date.
    If its month then replace calday with calmonth..
    Hope it helps.
    Regards,
    AL:
    Edited by: AL1112 on Dec 21, 2011 9:42 AM

Maybe you are looking for