How to delete a specific request out of the InfoProvider

Hi all,
we have a generic datasource to extract our CO-PA data. Unfortunately this datasource can not deliver any delta at the moment. This is why we need to have a full upload. In InfoPackage we select the single period 001, 002, or 003.
Now in March we only need to load the period 003 daily. In my process chain I would like to have a function that deletes only the request of this infopackage and not also the requests of the previous months, so I don't need to load all everyday, but only the current month.
Do you know such a process type?
Thanks in advance!

Hi Sandra,
1. Try "Delete Overlapping Requests from InfoCube" process type.
2. You can also do this in the InfoPackage. Goto Data Targets tab "Automatic Loading of Similar/Identical Requests"
These two are only possible for a Cube.
Anup.

Similar Messages

  • How to delete a specific request from ODS

    Hi all,
    We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is  for archive records. We need all of the records from  both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
    thanks,
    Yigit

    Hi,
    Thanks for your code. But is there any function module to delete most recent request from the ODS.
    I had 2 requirements...One in need to delete from ODS & Other one from Cube.
    FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
    Can please you send FM & ABAP Code to delete request from ODS.
    Thanks in advance.
    Yigit
    Message was edited by:
            Yigit

  • ABAP to delete a specific request (last one) from a Cube

    Hello Experts,
    In a process chain, I would like to delete the last request in a cube before proceeding through with the rest of the PC. For that purpose, I have an ABAP program which will retrieve the "last request ID" from the cube, then call FM RSSM_DELETE_REQUEST to delete that request using that ID and the cube name.
    Once in a while, this deletion doesn't work: the request status is set to erroneous and the PC goes on with its life.
    I am currently investigating this issue and have no mean to easily test it, including getting the actual error code from the deletion FM if there is any, so I'm looking for leads or ideas on the possible reasons of such a problem : the cube is fairly simple and doesn't use compressed requests or aggregates. When I delete the request manually, there are no problems.
    Is there any other FM more appropriate to delete a specific request such as the last one? Or some best practices associated with this particular task... I'm very new to SAP Netweaver so don't hesitate to point out the obvious.
    Regards,
    Guillaume

    Hello Matthew,
    I may be wrong, but it seems that "Delete Overlapping Request" won't be enough to obtain the specific behavior I am looking for.
    To give a more detailed description of the context, this specific Cube is used as a history cube, and until a specific date, the latest request, and only this one, not the previous ones which came from the same DTP, must be deleted and then replaced with the new data loaded in the process chain. This data is a value which gets updated everyday but after a specific date (loaded from a table), it's no longer updated and considered "history" and the new data won't replace the previous request but will be added to the cube. Not sure if that was clear
    Here is an example.
    The cube contains three requests, A, B and C.
    At D1, a new request, D, is loaded and since D1 isn't the "specific day", C is deleted (being the last request) and replaced with D. => The cube contains A, B, D.
    At D2, a new request, E, is loaded, and this time time D2 is the "specific day", so D isn't deleted and E is loaded into the cube which now contains A,B,D,E.
    I hope this cleared up the actual purpose of this routine.
    Do you think there is a way (some conditions or something like that?) to set a "Delete Overlapping Request" to achieve this? This would be much simpler than the current solution.
    However, it would still be nice if I could understand what is wrong with the straightforward ABAP program we use in the first place.
    Regards,
    Guillaume

  • How to delete a single request from DSO in BI 7.0

    Dear Experts,
    Could you please tell me how to delete a single request from DSO?
    I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
    Please suggest me this issue.
    Regards,
    Prathap

    IN DSO--its a very basic thing....
    ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
    So ,each new request has a realationsip with the older request.
    So in the cases:
    1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
    e.g older request  entries:
    a x 1
    new request
    a x 2
    change log
    a x 1
    a x -1
    a x 2
    so its quite obvious you can't have  a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
    2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
    I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
    thats request reverst posting
    IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
    regards,
    rk

  • I transferred pictures over from my computer to my iPhone 5 and now i cannot delete them on the phone and cannot work out how to delete them from my phone by the computer?

    I trasferred pictures over from my computer to my iPhone 5 and now i cannot delete these pictures from my phone, and i cannot work out how to delete them from my phone by the computer as the pictures do not show up in my files on the computer, how can i remove them i have over 400 pictures that need removing?

    If you have a Mac with iPhoto, plug the iPhone in and open iPhoto. Choose to import the photos. Once they have been imported, there should be an option to "Remove Imported Photos from Device". Choose this.

  • Program to delete a specific request from a Cube

    Hi Everyone,
    I've been trying to delete a certain DTP request from a cube but I'm unable to delete it. Is there any ABAP program to delete a specific request from a cube by provinfing requeset ID as the input.
    Thanks,
    Ram

    HI
    SE37RSSM_DELETE_REQUESTGIVE YOUR REQUEST NO & INFOCUBE NAME here. and execute.
    Table is :RSBKDTP contains DTP and target details.
    Hope it helps

  • How to delete unreleased transport request where the objects are locked

    Hi Experts,
      I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

    Hi,
    First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
    Than go to se10 and delete what you want.
    I hope it helps.
    Bulent

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • How do you get your iphone out of the connect to itunes screen?

    How do you get your iphone out of the connect to itunes screen?

    What error message is it displaying? Check this Apple support document for information on specific error messages when restoring the iPhone. http://support.apple.com/kb/ts1275

  • How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    Hi subhajit nag,
    I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
    Below is the sample what I am talking to:
    So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
    You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
    If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
    Hope this resoved your problem..
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
      <![CDATA[
       [Bindable]private var textInputWidth:int = 250;
       [Bindable]private var textInputHeight:int = 25;
      ]]>
    </mx:Script>
    <mx:Canvas id="canvas1">
      <mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas2">
      <mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas3">
      <mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
    <mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
    </mx:Application>
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari 

  • HT201250 How do I restore photos from Time Machine?  All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file.  I can't figure out how to break individual photo files out of the iPhoto file.  Any idea

    How do I restore photos from Time Machine?  All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file.  I can't figure out how to break individual photo files out of the iPhoto file.  Any ideas?

    You might post this query on the iPhoto forum and perhaps someone there can provide an answer.
    I tried this on my MBP and it seems that you have to restore the entire iPhoto Library.  What I did was put the current library in a separate folder on the desktop and then I restored the library from a prior date.  If you were to do that, you then could extract the desired photos and then delete the restored library.  Then place the current library back to the original location and import the desired photos.
    Not tidy but it seems it will work.
    Ciao.

  • I cant remember my password to logon to my mac, how can i change it with out needing the old one?

    i cant remember my password to logon to my mac, how can i change it with out needing the old one?

    http://support.apple.com/kb/HT1274

  • How to set a specific starting time for the falling snow code snippet

    Hi everyone
    I want to use the falling snow code snipet but I don't want it it to start as soon the movie starts.
    So how to set a specific time to start the falling snow?
    Thanks
    Patricia

    put the code (that's not in a function body and excluding variable declarations and import statements) in a function body and call it using the timer class.

  • How can i get HD video out from the lumia 900. ? ...

    How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?

    Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • How to delete an operation from order using the bapi

    Can somebody please tell me how to delete an operation from order using the bapi
    BAPI_ALM_ORDER_MAINTAIN.
    Following was the test data for the BAPI.
    000000 OPERATION DELETE 0000040052810070
    000000 SAVE 0000040052810070
    Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
    So, can you please tell me where Iam going wrong.

    Hi Subash Mohanvel,
    Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
    Unless you call this database saving of the records/values will not get reflected in the system.
    Hope that helps.
    Regards
    Kapadia
    ***Assigning points is the way to say thanks in SDN.***

Maybe you are looking for

  • Mapping in FDMEE

    When Creating a Import Format in FDMEE, how does the Data Load Mapping work...it's confusing. I am using EBS, There's 5 segments and it will not allow me to map Segment 1 to the Accounts Dimension, it forces me to select a Segment 2, Segment 3....Seg

  • Touch screen ghost clicks

    Hello, I have a Touchsmart notebook that seems to have  a mind of it own. Occasionally, once in 2 weeks almost, the touch screen picks a spot ( the same spot ) and keeps selecting it every 5-10 seconds. When this happen you cannot navigate or even sh

  • Calling Function in Stored Procedure

    Hi all, I've created table below, CREATE TABLE TEST   ID                  NUMBER(3)    NOT NULL,   selectcode          VARCHAR2(10),   value_use           VARCHAR2(10),   bin_no              NUMBER(10),   markup              VARCHAR2(40),   descr    

  • Weblogic server 9.2.2 installation on Windows 2003 64bit

    Hi, I need to install Weblogic 9.2.2 server on Windows server 2003 SP 2, however as this is an old version I have not been able to find documentation on how to do the installation. Where can I find installation instructions for this? Please help Than

  • Help! pageContext is NULL in custom tag constructor!

    I'm having a problem with a custom tag class, and I'm not sure whether it's because I'm doing something wrong, or because I'm running into a bug with Tomcat, JDK1.4b2, or something else. Basically, I'm finding that the pageContext object is null in t