How to delete a word mistake in a vocal track without deleting the whole track

How to delete a work mistake in a vocal track without deleting the whole track

jon w. (nichimyoun) wrote:
How to delete a work mistake in a vocal track without deleting the whole track
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

How can I protect formulae in a newly created spreadsheet without locking the whole sheet ?

How can I protect formulae from being overwritten on a newly created spreadsheet without locking the whole sheet ?

Olly,
I'll be picky here on nomenclature ;-)
Tables and other Obects can be locked, but Sheets can't be locked.
If you wish to shield some parts of your content from accidental modification, arrange your layout to put that sensitive content in tables separate from the tables that need to be accessed, and lock the sensitive ones. It's also possible, but rather clunky, to place shields over the sensitive area. A shield can be made by Inserting a Shape and positioning the shape over the sensitive area. With the shape selected, go to the Graphics Inpector and set the Opacity of the shape to zero. You will then be able to see through the shape but will no be able to Click through it to get at the cells below. This method is inconvenient because you have to worry about keeping the shape aligned with the table should the table need to change size or shape.
Jerry

How to delete THE WHOLE Reading List of Safari iOS 8 in one shot?

I know how to delete individual items one by one by sliding them to the left, I know how to clear their cache in Settings and I know how to clear Safari's history but nothing clears the whole Reading List in one stroke.
How do you do?
Thank you very much in advance for your answer.

Please read this book.
http://www.amazon.com/s?ie=UTF8&rh=i%3Astripbooks%2Cp_27%3AMatthias%20Zierke&field-author=Matthias%20Zierke&page=1
Rg,
Harshit

How to delete the whole array programmatically

Hello,
Is it possible to destroy/kill an array programmatically (not delete subset)? If yes, please tell me how. THanks in advance.
Sugento

Hi Devchander,
Thank you for your reply. I'm really surprised. Are you always working? By emptying an array, it means LabVIEW still has that particular array in memory, doesn't it? what if I want to completely destroy the array to prevent memory issue?
I have a PXI-6515, an industrial 24V DIO card, that I used to monitor optical sensors. I just found out after I hooked it up that the output from DAQmx for DIO is a 1-D boolean array. I like to be able to plot the digital signals on the Digital Waveform Graph, and to do that I have to use shift register and concactenate the previous array with the newly read digital signal. I only want to keep the array when a certain criteria is met. When it's no longer met, I want to "destroy" the array. Attach is a sample VI. Is this an efficient way to plot a Digital signal? also, since i'm using 24V, i can't use the TTL counter. Is there a VI readily available to count signal highs and lows? I have made a VI that specifically does this but I'm just wondering if there is LabVIEW function that does it. Thanks.
Peter
Attachments:
testing Digital signal array.vi ‏33 KB

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to delete the trailng zeros in my table

Hai
I had a serious problem
My table name called nrgp_main
Here nrgpno declared as char(8) i had changed as 10 by mistake and i have update two times
the number is like this 003800001 i need to cut the first '0' and update it
Thanks & regards
Srikkanth

Duplicate post
how to delete the trailng zeros in my table

How to delete the PO..?

Hi all
Can anybody explain me how to delete the purchase order
1.Before release ..?
2.After release..?
Thanks
sp-mm

How to use "me98" to delete PO from system completely?
I am using "me98"(archive) to delete a PO that have a mistake for vendor code.
The following step is:
the 1 step: I maintained and saved a variant. For this variant, I have to create a name for this variant and select the PO which want to delete. it's right?
the 2 step: I maintained a "Start Date". For "Start Date",I select the "immediate " to execute it. Is it right?
the 3 step: whether I maintained the "Spool Params" or not? May I execute it immediately or not?
I have no idea for deleting PO via the "archive". How can i do that ?
Archiving is not deleting. What do you think why SAP developed that much programs to retrieve and read data from an archive.
Archiving is saving and keeping data for a certain period (based on local laws for data retention and auditing purposes) outside of the production data base. Such a job is usually done to keep the database small and fast.
While doing archiving the records are written to a file and verified to be readable and then the original record gets deleted from the database. Only if you delete then the file with the archived data you have deleted the record forever.
Sometimes people seems to work like a burglar and want erase every single evidence for an error. But even errors, or especially errors are subject to be audited if they are corrected in the right way. This is the same for financial and tax auditiors as for auditors for ISO 9000.
To be able to archive, you need to setup the path from SAP to the archive. You need to define the size of your archive and how may records should be kept there.
Step 1: Create variant for Archiving. Give it a name. Enter your PO number. Flag One step procedure. Flag detailed log. Erase flag for test run.
Step 2: Maintain your start date, you can use Immediate in such a small case.
Step 3: Maintain spool parameters. Enter your printer and set the values if you want to print immediatly and if you want keep the print. I suggest to hold the spool in the system. This helps you to determine any error.
Step 4. Execute the variant.
It creates 4 jobs:
ARV_MM_EKKO_SUB...., ARV_MM_EKKO_WRI.... ARV_MM_EKKO_DEL.....
ARV_MM_EKKO_STO.... If one of the steps fails, then everything is rolled back, hence nothing is archived, the record is still in your database. In this case use the jobs spool and joblogs to find out what happend.
http://www.sap-img.com/materials/how-can-we-delete-purchase-requisition.htm
Regards,
Ashok

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to delete the one of cost centers in Splitting Structure(OKEW)?

Dear All,
I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
How to delete the one of cost centers in Splitting Structure(OKEW)?
Jocha

Hi Chang
Welcome to SDN! Its our pleasure to help you here
Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
Br, Ajay M

ADF Desktop Integration : How to delete the table in Excel?

Hi,
I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
I could not find a way to delete that table.
I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
My question how to delete the table not corrupting the Excel.
Thanks
Pavan

Pavan,,
Welcome to OTN.
You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
Refer the documentation for more info.
http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
-Arun

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

Does any one know , how to delete the others in itunes. it takes lot of space

does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

How to delete the films in VLC in my ipad?

I sync some films(.avi) for VLC to my ipad via itune(I bought free VLC in ipad). One problem is too slow to see in ipad, many mosaic occurred. The other problem is how to delete the films in VLC on my ipad.. there is no any button to delete, only add button..

But what if the videos don't appear in the list under the Apps Tab >File Sharing?
They definitely are on the iPad. I can watch them with VLC. But the VLC list is empty when I select it. Most of my File Sharing lists are blank even though I can access the files I placed on there with my iPad. (Worse, Comic Reader has a list of files but none of those files are accessible on the iPad but a completely different set is readable on the iPad!)
Any ideas?

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

How to delete a word mistake in a vocal track without deleting the whole track

Similar Messages

Maybe you are looking for