How to delete Business partners in use

Hi All,
I have accidently removed some  business partners from table BUT000. After I realized it I tried creating them again but I got the error that Personal Address does not exist. After some help from experts I realized that this is because entries for those business partners were still there in some tables like BUT020. Now i tried deleting these business partners entirely using BUPA_TEST_DELETE. But i got an error saying that these BP's are in use in some transactions and hence cannot be deleted.
Please advice how can I achieve this.
Thanks in Advance,
Saket

Hi Saket,
Check the Tcode - BUPA_DEL.

Similar Messages

  • How to delete Business partners in Business partner master data

    Dear sir,
    I had  remove some business partners in Business Partner maserdata. but i will remove some business partners one error will come into picture that error is " You cannot remove business partner; linked Sales Quotations exist  [Message 3502-79] "
    How to remove that bp in bp master data. plllz tell me how to solve these problem step by step process in sap business one 2007 B

    Hi,
    If you have created a Sales Quotation or for that matter any document for  the Business Partner you are trying to delete, you cannot delete the Business Partner from the database.
    As transaction and document is linked to the BP, then you cannot delete it.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • How to delete  Business partner in solution manger.

    hi friends
    I have two business partner BP1 & BP 2 assigned to  xxx user(1 user).
    but i want to delete the BP1 and it was not in use.
    i have tried below transcation but i can not delete 
    Program : BUPA_TEST_DELETE
    tcode : BUPA_DEL
    > given BP1  and executed
    > i am not able to delete and giving below message.
    Delete Business Partners
    No Business Partners Deleted
    can any one knew how to delete
    regards
    raja

    Hello Raja,
    Have you checked and implemented the following notes (check they are correct for your release and sp level)
    BUPA_DEL
    SAP Notes:
    893900  Report for inconsistencies b/w BUT000 &  relationships
    1383199 BUPA_DEL: Fatal error stops deletion process      
    1393366
    1111635  
    Apoloigues for the list of notes but it seems any inconsistency in details for the business partner may block the deletion and there are many corrections linked to this transaction.
    Hope the above help,
    Paul

  • How to delete Hyperion Planning member using ODI

    Hi All,
    Anyone know how to delete Hyperion Planning member using ODI? And how to update account type on Hyperion Planning Using ODI?
    e.g.:
    I have a member with account type Saved Assumption, and I need to change to Revenue, but it cannot change. But if I change to Expense, it can. So what's wrong with the mapping?
    This is my csv file for update a member on Hyperion Planning.
    Parent,Account,Default Alias,Operation,Data Storage,Two Pass Calculation,Account Type,Time Balance,Skip Value,Data Type,Exchange Rate Type,Use 445,Variance Reporting,Source Plan Type,Aggregation,Member Formula
    Account,Statistics,,Update,,,,,,,,,,,,
    Account,Meal,,Update,Store,,Expense,,,,,,,,,
    Account,Test1,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
    Account,Test2,,Update,Never Share,,Revenue,Average,None,Non-currency,none,,,Consol,~,
    Account,Test3,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
    Thanks in advance.
    Regards,
    Sumardi
    Edited by: Sumardi Wijaya on Mar 31, 2009 10:57 PM

    Hi,
    To delete a member you use the Operation column, the following values can be used.
    Update – This is the default and is used if not populated, it Add, updates, moves the member being loaded.
    Delete Level 0 - Deletes the member being loaded if it has no children
    Delete Idescendants –Deletes the member being loaded and all of its descendants.
    Delete Descendants –Deletes the descendants of the member being loaded, but does not delete the member itself.
    Does the member you trying to change to Revenue have a variance reporting set to "Expense" as it will need to be set to "Non Expense"
    Also in your interface you can add logging options in the IKM, this maybe will give a clearer indication where your problem lies.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to migrate Business Partners?

    Hi All,
    How to migrate Business Partners from one Solution Manager to another?
    Both Solution Managers are 7.0 SPS 17.
    We have already move users and roles.
    It looks like that we loose messages from projects when we try to migrate them with SOLAR_MIGRATION because of the missing Business Partners.
    Thanks & Best Regards,
    Leif Pedersen

    Hello Leif,
    I have the same problem. Did you figure it out?
    thanks,
    Ingrid

  • How to create Business Partners (in Person category) from Customer Accounts

    Hi all
    In ECC 6.0, I am creating Business Partners (Master Tenant w Customer Account) from 'employee' Customer Accounts and the system is defaulting to the 'Organization' category.
    Does anyone know how to configure it so that Business Partners are created in the 'Persons' category when FLBPD1 is executed?
    Thanks in advance.
    Dion
    Edited by: Dion Ng on Jan 20, 2009 8:05 AM

    Hi Dion,
    Now I understand your issue.
    The system uses BadI CVI_MAP_BP_CATEGORY to determine with which category the bp will be created.
    This Badi check with which Title (TITLE_MEDI) the customer is created and according to the definitions made in table TSAD3 - Forms of Address (Key) (Business Address Services) (SPRO / Flexible Real Estate Management (RE-FX) / Business Partner  / General Settings for Business Partner / Business Partner  / Basic Settings / Forms of Address / Maintain Forms of Address ) the system creates the bp with the specific category. This is standard!
    If this is not enough for you please let us know.
    Regards,
    DAS

  • Unable to delete Business Partners in CRM

    I have used TCode BUPA_PRE_DA to mark a certain BP to status "to be deleted". The message said "Business Partner 123 has status 'Flagged for Delettion". When I went to delete the BP using BUPA_DEL, I couldn't do it. The message says, 'no business partners deleted'. I have SAP_ALL and SAP_NEW authorizations. Am I doing it the right way? What could be the issue? If there is an alternative, please suggest.
    Vijay

    Vijay,
    There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
    Regards
    Pankaj

  • How to Remove Business Partner Address using DI Server

    Hello,
    I need to remove Business Partner Addresses using DI Server, the example in the SDK only mentions the remove of the entire business partner, but I need to delete only one of the business partner addresses, how can it be done?

    Hi,
    the usage of the "UpdateWithSubDeletion" method of B1 object atom might be an option.
    You need to update the complete business Partner with the changed amount of addresses.
    The usage is tricky, you need to retrieve the BP, which you want to update, first via synchronous retrieval method using import/export mode.
    From the retrieval result you should start to update every segment with all fields including the BPAddresses segment in exactly the same sorting order as displayed from the synchronous retrieval.
    Best regards
    Bastian

  • Can we delete Business Partners & corresponding Collection items.

    Dear all,
    In our Quality system, we have an issue Collections management. I maintained the Business partner number range though BUCF, but forgot to check the External Flag.
    I made sure that the customer number range (XDN1) is equal to the Business partner number range.
    I ran MDS_LOAD_COCKPIT -  to create the Business partners, even though it gave few errors, I ignored them thinking we can create them later.
    After the Business partners were created, I executed FDM_COLL_SEND01 (Distribution of Data to Collections Management). Later when I generated the collections worklist, I found that something went wrong.
    Eg. Business partner 750000(BUT000) was created for customer 750018(KNA1). This happend to all other business partners.
    So Can anyone please let me know how can we rectify this? Is there a way to delete / reset entire collections data including the Business partner master data.
    Thanks in advance.
    Krishna
    Edited by: Krishna on Aug 10, 2010 11:18 PM

    Hello Krishna,
    First run the /BUPA_DEL to delete all the BP's. Once this is done we need to create a custom program to delete the GUID's from the table CVI_CUST_LINK.
    Get in contact with your ABAPer and tell him to create a custom program to delete the GUID's from the table CVI_CUST_LINK. Once this is done you can create your BP's with the Mass BP creation program.

  • How to delete a single message using iOS 8

    how can I delete a single message in iOS 8

    Hey Geezer4765,
    I have an article for you that can explain how to accomplish this:
    Manage conversations - iPhone
    http://help.apple.com/iphone/8/#/iphf2d85437
    Delete a message. Touch and hold a message or attachment, tap More, select additional items if desired, then tap .
    Delete a conversation. In the Messages list, swipe the conversation to the left, then tap Delete.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How to Delete duplicates rows without using rowid/distinct.

    How to delete duplicates rows present in a table without using rowid or even distinct.

    How about:
    SQL> SELECT * FROM t1;
             A          B
             1          2
             2          3
             1          2
             4          4
             4          4
             4          4
    SQL> DELETE FROM t1
      2  WHERE (a, b) IN (SELECT a, b FROM t1
      3                   GROUP BY a, b
      4                   HAVING COUNT(*) > 1) and
      5        rownum = 1;
    1 row deleted.
    SQL> /
    1 row deleted.
    SQL> /
    1 row deleted.
    SQL> /
    0 rows deleted.
    SQL> SELECT * FROM t1;
             A          B
             2          3
             1          2
             4          4Although, if I was asked a similar question with all those restrictions, my first response would be along the lines of: Is this question indicative of the way I will have to work if I join this company? If so, there is no point answering because I wouldn't touch this job with a ten foot pole.

  • How to delete requests in PSA using Process chains

    Hi All,
    Can anyone explain me how to delete all the requests in PSA using Process chains.
    This is what I did...
    1. use Process type 'Deletion of Requests from PSA'
    2. Settings:
    Object Type - PSA table
    Object Name - <Datasource name>          
    Older than - 0 (Zero) days
    These settings doesn't work. Can you please let me know exact settings to use for deleting all the requests in PSA of a datasource.

    Hello Praveen,
    That's what I thought too. But if I use '1' one day, what if I need to run it twice same day? So this doen't work for my requirement.
    Any other suggestions?
    Thanks.

  • How to delete/update GPS data using Lightroom?

    Title says it all, but I'll explain why I need it.
    I have a Sony SLT A55 which is apretty good camera, it has a GPS.
    The way GPS work in this camera is it gets a fix, and then updates every undetermined time the position. That's okay, what is stupid in its design is, if you haven't taken pics in let's say 24 hrs. and you move several miles away and start shooting indoors (no GPS signal available) it will mark all your pics with your last known position, so now I have several photographs with a location I left several DAYS ago. I'd prefer the camera not to record GPS data than having a wrong location, but that's another thing for the Sony forums.
    So, now I want to delete (or update would be another option) the GPS data from the pics that are tagged with wrong locations.
    I'm shooting RAW,
    Is there any way to do it inside Lightroom?

    I’m a Nikon user, and here’s how I geotag my images when I want to (not very often). I use a Nokia N95 smart phone and Nokia Sports Tracker to track coordinates with timestamps. I use Nikon’s ViewNX2 to import the images from my camera (or card) to the final destination (folder) of the images. I also transfer the log file from the Sports Tracker to my computer. Then I use ViewNX2 to geotag the most recently imported set of images with the log file from the Sports Tracker. (I don’t know why but I have to adjust the time offset by one hour, fortunately this setting is sticky so I don’t have to do it every time). When the images are geotagged, I do an in-place import in Lightroom, and Lightroom recognizes the GPS coordinates.
    ViewNX2 is a free download, and I think this scheme can be used to geotag jpg of tif images from any camera. The raw file capability of ViewNX2 is understandably restricted to Nikon cameras. You could try Geosetter, another free download. The problem with my system is that Geosetter did not understand the log files of my Nokia N95. GPSBabel can translate the log files to a format acceptable to Geosetter, but since ViewNX2 does importing and geotagging (and time-offsetting the N95 log file), I have no need for additional programs.
    WRT to the original question ("how to delete/update...") you could try the following: write all metadata (keywords, settings) to your master image files in LR. Then use Geosetter or some other additional tool to modify the GPS data or the affected images. Finally, synchronize the images back to Lightroom, and select the option to use metadata from the images (instead of LR's catalog).
    Best regards
    Antero

  • HT204053 How to delete apple ID and use another

    I created two apple id's and I'm trying to figure out how to delete the extra

    Cpalmer75 wrote:
    I created two apple id's and I'm trying to figure out how to delete the extra
    This is Not Possible...
    From Here   http://support.apple.com/kb/HE37
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

  • How to delete icloud and still use find my iphone and delete old purchases

    hi everyone,
    i want to get rid of my i cloud accout as i think i use nothing on it.
    how do i do this?
    if i delete it can i use find my iphone?
    also in itunes, purchases,app
    there are about 100 apps i would like to DELETE not hide, this somehow is also connected to icloud
    any help will be great.
    im not very good with itunes or computers so please explain it to me in very easy terms
    Cheers guys

    Find My iPhone REQUIRES an iCloud account.
    iTunes purchases are permanently tied to the Apple ID (which is typically also the iCloud account) that they were acquired with.
    The iCloud account is used on a daily basis by anyone with an iPhone.
    iCloud accounts, which are Apple IDs, cannot be deleted.

Maybe you are looking for