How to delete columns in table control (tab Services) for transaction ME51

Hi, gurus!
We're facing this problem in our upgrade: we have a batch input (ME51) in order to create purchase requisitions, but we get an error with the dynpro data (program: SAPMM06B, dynpro: 0102).
We are sure we populate all the required fields in that screen.
The only possible reason we find for that error is the fact that we have two new entries in table control (in tab services=> Current settings there are 67 fixed columns)
We had to add in table T162V (which previously had only 65 columns for each variant): ESLL-SRVMAPKEY y ESLL-EXTERNALID, as described on note 1382685, so table control and table T162V could have same number of fields.
We guess we could solve the batch input error deleting those fields in both table control and T162V, but don't know how.
We really would appreciate any clue.
Thanks in advance.
Best regards,
J. Madariaga

It's an own batch input.
The error is: "Batch input information for dynpro SAPMM06B 0102 does not exist", but the fields in that screen are alright.
And that batch input works fine in another client with same patch level, but without fields ESLL-SRVMAPKEY and ESLL-EXTERNALID in table T162V, so I guess that could be the problem (not sure about it, of course).
Regards,
J Madariaga

Similar Messages

How to delete columns in table control

hi
1) I have creted a table control with five columns
now i want to delted the tow of the five coluent pls let me know how to delete it
1) also i am useing a module pool programming (code if needed i will paste)
in that the requirment is to select data from a ztable and aloow user to enter new ship to data only whne the corresponding records exists in kna1 table
and to populate the name1 value automatically from table kna1 whne user enters ship to number
pls suggest
regards
Arora

Hello,
Requirement 1
i believe you need to delete a row from the control table based on the user input...
if thats the case then definitely in the control table the multiple line selection will be activated .
in PAI of the control table screen...
if user has clicked delete.
loop at control table records..
if the selection code for the line is 'X'.
Delete from the internal table.
endif.
endloop.
endif.
Requirement 2..
i will give an outline on the checks
a)first let the user enter the data...in the PAI of the screen...write the code to do the checking....if your requirement is not satisfied provide a warning/error message or delete the record and give a message stating the reason for deletion...
in PAI.
for a control table...
loop at the table records
select from table and check if user record is O.K
if not delete the record and give message
endif.
endloop.
b)similarly inside the PBO write code to fetch the name1 from Kna1 table for the ship to number if that ship to number is not empty
in PBO of that screen
if ship_to is not initial.
select text for ship_to number to the display field
else.
clear the display field
endif.
reward if the suggestions were useful
Regards
Byju

How to add column in table control for transaction APPCREATE

Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...

You can add new columns
If you add new columns in tr. PHAP_CATALOG

How to delete data in table control

Hi,
I am doing module pool programming. After the user enters the data in table control after saving the data. if the user wants to remove the line item the line item shd be removed from the screen and data base.
Please Give me vaulable Suggestions
Regards

Hi,
Screen 8002 (with table control) --> select records --> press delete button --> delete selected records
Now you wan to delete those records selected by the user at runtime when DELETE button is clicked.
Take another internal table and work area same as the initial internal table and work area used in screen 8002 which is to be used to delete the selected data.
Take the names of the input/output fields as work_area-field_name and select column in table control as work_area-flag.
Also take a flag field of size 1 datatype character as the last field in the internal table and work area while declaration.
You must have passed a code in PBO of the screen for reading internal table into the table control.
So it reads the internal table into the table control whenever you perform any action on use command.
All you need to do is to write a code to modify the internal table form the table control while performing any user action.
Remember to change the LINE SEL option in attributes of table control as MULTIPLE.
At screen logic,
PROCESS BEFORE OUTPUT.
MODULE status_8002. "for pf-status
LOOP WITH CONTROL po_tab. "po_tab is table control
    MODULE pass_data. "to pass data into table control from internal table
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_8002. "for user command(back and exit)
LOOP WITH CONTROL po_tab.
    MODULE modify_data. "to modify data from table control into table control
ENDLOOP.
MODULE delete. "to delete the selected records
In PBO,
*&      Module STATUS_8002 OUTPUT
MODULE status_8002 OUTPUT.
SET pf-status 'ZAB_PFSTA'. " pf-status
DATA : line_count TYPE i.
DESCIRBE TABLE it_ekpo
LINES line_count.
po_tab-lines = line_count + 10.
" to make table control scrollable
ENDMODULE.                 " STATUS_8002 OUTPUT
*&      Module PASS_DATA OUTPUT
MODULE pass_data OUTPUT.
READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
ENDMODULE.                 " PASS_DATA OUTPUT
"it_ekpo is internal table and wa_ekpo is the work area
In PAI,
*&      Module MODIFY_DATA INPUT
MODULE MODIFY_DATA INPUT.
MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
"modify records from table control into the internal table
ENDMODULE.                 " MODIFY_DATA INPUT
*&      Module DELETE INPUT
MODULE DELETE INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'DELETE'. "when delete button is clicked
      SORT IT_EKPO BY FLAG DESCENDING. "sort by flag(selection column value)
      CLEAR WA_EKPO1.
      CLEAR WA_EKPO.
      REFRESH IT_EKPO1.
      LOOP AT IT_EKPO INTO WA_EKPO WHERE FLAG = 'X'.
        DATA : J TYPE I.
        CLEAR J.
        J = SY-TABIX. "assign index value if a record is selected
        MOVE-CORRESPONDING WA_EKPO TO WA_EKPO1. "append selected records to another
        "work area and append to another internal table to delete
        APPEND WA_EKPO1 TO IT_EKPO1.
        DELETE IT_EKPO. "delete the selected records from initial internal table
        " to reflect the changes on the table control
      ENDLOOP.
      IF J = 0.
        MESSAGE I006. "if no record selected
      ELSE. "if some records are selected
        DELETE ZEKPO FROM TABLE IT_EKPO1. "delete from database table
        COMMIT WORK.
        IF SY-SUBRC = 0.
          MESSAGE S007. "success message (records deleted)
        ENDIF.
      ENDIF.
ENDCASE.
ENDMODULE.                 " DELETE INPUT
Now at PAI, you have delete records and these changes are reflected back to the internal table.
Now when PBO is executed it will again read the initial internal table and will not show the deleted records.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

How to delete records in Table control

Hi,
i defined a table control in which it has 5 records and i have 1 ''DELETE button.
if i select a record and if i click on delete button.
The selected button has to be deleted.
Please let me know how i can i do..if possible with sample codes..
Thanks in advance.

Hi Andrew,
In the PAI event, you need to handle the DELETE logic.
Just have a look at the following code.
OK_CODE = SY-UCOMM.
Case OK_CODE.
When 'DELETE'.
Loop at internal table where CHECKBOX = 'X'. " Checkbox is marked.
lv_sytabix = sy-tabix.
If sy-subrc eq 0.
Delete from itab index lv_sytabix. " Deleting values from ITAB
Endif.
Endloop.
Endcase.
Also have a look at this demo dynpro code. This will let you know the exact syntax.
DEMO_DYNPRO_TABCONT_LOOP_AT.
Hope this will help.
Thanks,
Samantak.

How to delete record from table control in BDC?

Hello friends,
I am running a BDC program to delete records.
I have file with following records and i got these records into t_itab.
Material     Plant     Start date     End date     Cost
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100004     S002     09/01/2008     09/31/2008     56.00
MQ100008     S003     09/01/2008     09/31/2008     57.00
Now, I have BDC transaction in which table control screen which contains following structure.
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100002     S002     09/01/2008     09/31/2008     56.00
MQ100004     S003     09/01/2008     09/31/2008     47.00
MQ100005     S004     09/01/2008     09/31/2008     25.00
MQ100006     S012     09/01/2008     09/31/2008     76.00
MQ100007     S033     09/01/2008     09/31/2008     17.00
MQ100008     S011     09/01/2008     09/31/2008     95.00
MQ100009     S002     09/01/2008     09/31/2008     46.00
I have recorded from SHDB in which first record will be delete.
So, when i loop through t_itab,instead of deleting MQ100001,MQ100004 and MQ100008 from BDC screen,
it is deleting MQ100001,MQ100002 and MQ100004 (first record for each process ).
Which i don't want to.
Is there any facility in BDC to put records on top which i want to delete?
Please guide me.
Regards,
RH

Hi,
While doing recording check for Filter button available for the table control, if it available then do the recording for the same.
Once it is done while passing the data from internal table put the value into Filter field.
Hope it resolves your issue.
Thanks & Regards.
Nagaraj Kalbavi

How to delete record from table control using BDC?

Hello friends,
I am running a BDC program to delete records.
I have file with following records and i got these records into t_itab.
Material     Plant     Start date     End date     Cost
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100004     S002     09/01/2008     09/31/2008     56.00
MQ100008     S003     09/01/2008     09/31/2008     57.00
Now, I have BDC transaction in which table control screen which contains following structure.
MQ100001     S001     09/01/2008     09/31/2008     55.00
MQ100002     S002     09/01/2008     09/31/2008     56.00
MQ100004     S003     09/01/2008     09/31/2008     47.00
MQ100005     S004     09/01/2008     09/31/2008     25.00
MQ100006     S012     09/01/2008     09/31/2008     76.00
MQ100007     S033     09/01/2008     09/31/2008     17.00
MQ100008     S011     09/01/2008     09/31/2008     95.00
MQ100009     S002     09/01/2008     09/31/2008     46.00
I have recorded from SHDB in which first record will be delete.
So, when i loop through t_itab,instead of deleting MQ100001,MQ100004 and MQ100008 from BDC screen,
it is deleting MQ100001,MQ100002 and MQ100004 (first record for each process ).
Which i don't want to.
Is there any facility in BDC to put records on top which i want to delete?
Please guide me.
Regards,
RH

One option is to identify the table and find out the location as the number of row which should be deleted from the table and then in the bdc program instead of postioning the cursor on the row 1(using the statement perform bdc_cursor ....(01)), replace the 01 with the row number.
Second option is that if a filter control is available for the table control, then filter the data each and every time with the material number to be deleted and then delete the first row.
Regards
Farzan

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to get sum of quantity column in table control

Hi, expert ,
Someone can guide me how to get som of qty column in table control ?
I created a screen with a table control and has a qty quantity field .
I want to show total of qty in a field .
my code like this ...
PROCESS AFTER INPUT.
LOOP AT I_tab.
    CHAIN.
       FIELD I_tab-COUNTQTY MODULE caculate_total_qty .
    endchain.
    MODULE UPDATE_TOTAL_QTY .
ENDLOOP.
but, when I Back to the previous screen
It's caculate again so I always get wrong Total quantity .
anyone can help me ...

Hi , Dhina
I have another question .
I use internal table data in table control to update database table .
The data in the db will be change ,
but each record I want to delete in table control , it's still exist in database .
my code is
WHEN 'SAVE'
     MODIFY YDSGBT53 FROM TABLE I_YDSGBT53 .
     COMMIT WORK .
END CASE
How to fix my code and let it can change and delete data in database ?
or
when I delete record in table control I must to delete data in the database too .
Edited by: TitusFang on Jun 16, 2011 3:21 AM

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

How to Enable and Disable column in Table Control.

Hi all,
I want to make certain column of Table control as Enable or Disable on Button action.
Enable means ready for input and Disable means not ready for input.
Please send me sample code.
Thanks in advance.

Hi Vipin,
    You have to loop through the table columns to set the properties in the PBO of your screen.
Here is the sample solution.
delcare a workarea for the columns in the table control in your top include.
Table Control .
CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN '0100'.
DATA: WA_COLS LIKE LINE OF TAB1-COLS.
in your screen
PROCESS BEFORE OUTPUT.
MODULE INTIALISE_100.
*&      Module 0100_INTIALISE OUTPUT
MODULE INTIALISE_100 OUTPUT.
    LOOP AT TAB1-COLS INTO WA_COLS.
      WA_COLS-SCREEN-INPUT = 1.
      MODIFY TAB1-COLS FROM WA_COLS TRANSPORTING SCREEN-INPUT.
    ENDLOOP.
ENDMODULE.                 " 0100_INTIALISE OUTPUT
modify the screen-input property as required for the table control columns.
Please provide points if helpfull.....
Thanks,
Karthik
Message was edited by: Karthik
        Karthikeyan K

How to bring cursor in Table control??

Hi to all
How to bring cursor in Table control when entering into screen
can anyone tell me??? pls explain with example..
thanks
senthil

Hi,
Check the below code
data l_tc_name             like feld-name.
data l_tc_field_name       like feld-name.
get actual tc and column
get cursor field l_tc_field_name
             area l_tc_name.
Regards,
Vind

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

How to delete columns in table control (tab Services) for transaction ME51

Similar Messages

Maybe you are looking for