How to delete or Update the data in the MEAN table

Hello Gurus,
I would like to delete or update the data in the MEAN table...how to do it.
Precisely I would like to change the status of Main EAN Indicator (field HPEAN).
Kindly let me know ??
Rehards
Senthilll

programmatically, you may use [BAPI_MATERIAL_SAVEDATA|https://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata&cat=sdn_all] [EAN|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_material_savedata+ean&adv=false&sortby=cm_rnd_rankvalue]
Regards,
Raymond

Similar Messages

  • How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
    Set up steps so inset, update or delete operation takes place across the servers.
    It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
    Also please describe would it be different for SQL Server 2012?
    If so, then what are the steps?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
    Set up steps so that inset, update or delete operation gets done correctly across servers.
    I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
    Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

  • Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    If you just installed iCloud does that mean you updated the iOS that's running on your iPad?  If so, you'll want to restore all the programs you have from the backup you hopefully made.
    Refer to these articles for help.
    iTunes: Backing up, updating, and restoring iOS software.
    If you don't want to use iCloud, simply don't activate it.
    You can also download the programs again.
    If you live in a country that supports re-downloading apps then you can re-download them.  You can refer to this article for more help.
    Downloading past purchases from the App Store and iTunes Store
    What to know if your country supports downloading past purchases?
    iTunes in the Cloud Availability

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • How to delete the dat afrom the Ztable in GRP

    Hello Experts,
                             How we can delete the data from the Ztable created by the developer , in the Production server ,please give a brief idea  about it , thanks in advance.

    see this:
    to delete data from z table
    also follow this mentioned by jagadish in above thread:
    start tr. se16n
    type the table name and press ENTER.
    Then type the string "&sap_edit" into the command line and strike Enter
    again.
    enter your selection criteria.
    run.(F8)
    now you can easily delete the lines you want (and then save)
    All Changes are noted in the tables
    SE16N_CD_DATA and
    SE16N_CD_KEY.

  • How can we delete the data in e-fact table.

    how can we delete the data in e-fact table.

    hii,
    You cannot delete the request individually but you can one of the following:
    1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
    2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
    3. Reverse posting is another possibility.
    hope it helps,
    partha

  • I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore from backup it shows the previous OS X (Leopard) beside the date of the backup. Will it go back if I restore?

    I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore it from the backup it shows the previous OS X (Leopard) beside the date of the backup that I want to select. Will it go back to Leopard if I restore it from the backup?

    No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
    App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
    After you restore from TM, check HD > Incompatible Software

  • How can i get the date of the last update of one PL/SQL package ?

    Hello,
    How can i get the date of the last update of a PL/SQL package
    named MYPACKAGE ?
    Thanks in advance ! ;-)

    to get the timestamp,last ddl time of object
    select timestamp,last_ddl_time from user_objects
    where object_name='<package name>';
    this will give you last transaction time ,date of object

  • How to view the date when the Customers credit limit updated in SAP-FSCM?

    How to view the date when the Customers credit limit updated in SAP-FSCM?

    OK you can look at field - LIMIT_CHG_DATE in the table - UKMBP_CMS_SGM via SE16
    I would assume you would want to run it based on a date range.

  • Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

    Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

    See these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual, Mountain Lion Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.
    Once you get familiar with the Mac, see:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    How to Speed up Macs, ,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths and
    Myths of required versus not required maintenance for Mac OS X for information.

  • How do i update the date on the calender icon in cloud

    How do i update the date on the calender icon in cloud?

    Hi Scott, There is no single-click to update all the Adobe CC apps, but you can go through the Adobe Application Manager to download the Creative Cloud app, which will let you install the new CC versions of photoshop, premiere, etc.
    So basically you will still have your CS6 software, and it will install the CC software next to it.  That way if any of your plugins haven't been upgraded yet, you can still use CS6.

  • How to correct the data in the psa table?

    1Q. There are lot of invalid character in the infopackage of say 1million records. it takes lot of time to check each and every record in the data package(PSA)and correct it. i think there is an efficient way to reslove this issue that is going in the PSA table to correct all the records. is it right, if yes how to do it?
    2Q. If say there are 30 data packages in the request and only data pacakge 25 has the bad records. if i correct the data in the PSA and push it to the data target, its gone process all the data packages one by one that takes lot of time and delay our process chain job that has depedency on the load. can i just manually process this data package only. if yes how to do it?
    3Q. when i successfully correct all the bad records in the data package and push it from the PSA. the request dont turn to status green and have to manually turn this request to green in the data target after i verify all the data packages have on bad records and it is a delta update. is my process right? as it is a delta what are the pitfalls i have to watch for? and the next step after this is compress the request this is very dangerous because this basic cube have lot of history and it will take a long time probably weeks to reload it. how to take precuation before i turn it to stutus green in the data target?
    Thanks in advance! and i know how to thank SDN experts by assining points.

    Hi,
    1Q . Update the invalid chars in the filter table using tcode RSKC and also write a ABAP routine to filter out the invalid characters.
    2Q. For the incorrect data packet, you can right click on the data packet in the monitor details tab and say update manually. That way you don't need to reload the entire request again.
    3Q. When you reload the request or update individual data packet again, the request should automatically turn green. You don't have to turn it green manually. The pitfall is, if you turn a delta request green, you have chances of losing data and corrupting the delta. Best practise is never turn a request green manually.. Even if you compress the requests, you can use selective deletion to delete the data and then use an infopackage with the same selections, that you used for deletion to load the same data back.
    Cheers,
    Kedar

  • How does replicate recover trail raw data to the true values?

    How does replicate recover trail raw data to the true values?
    or
    How replicate use the trail file?
    recover the trail file col values to a SQL?

    user5834416 wrote:
    How does replicate recover trail raw data to the true values?
    or
    How replicate use the trail file?
    recover the trail file col values to a SQL?GoldenGate "capture" (extract) parses the redo/archive logs and writes out trail data in a GG-specific, database independent format. The trail contains changed-data events: inserts, updates & deletes (and optionally DDL events.) The GG replicat reads this data and converts the data to SQL to be applied to the target.
    The GG trail files are not the same as the data as originally seen in the redo logs (GG is not doing any type of log-shipping of redo logs). The actual data in the trail isn't really important for end-users; it's an implementation detail (much like you shouldn't care what Oracle's redo log format is). But you can use "logdump" to inspect the contents of this (binary) file... again, kind of like LogMiner can be used to inspect archive logs.
    There are a number of (conceptual) analogies one can draw between Oracle redo logs & GG trail files. But they're not the same. Your questions are mostly internal implementation details that are not really important for understanding how GoldenGate works. Nonetheless, it is useful to become familiar with logdump for advanced troubleshooting.
    Good luck,
    -m

  • How can I select a radio button in a table regarding the data in the cells?

    Hi everyone
    This is the issue: I need to select the RadioButton which is in a table with data related to transfers in the cells next to it, so I need to select the correct radio regarding the data next to it.
    This is the whole process: First I go to the Add Recurring Transfer section and select the parameters of the transfer (Accounts, date, amount, months etc), then with VB code I capture those parameters from the page and store them into Global variables for further usage on my E-tester script.
    Right after that I need to select the radiobutton regarding the data of the transfer that I already created in order to delete it or modify it (Please see Attachment selectradio1.jpg)
    So How can I move along the table and compare each cell with the variables that I created with the transfer information, so when I finish comparing a row cell by cell and if all the comparison match well in that row, I could select the radiobutton of the row.
    Note: Second Attachment selectradio2.jpg shows the source code of the table...If you need more info please let me know
    Could you please help me with this problem?? I'm Kind of frustrated with this issue jejeje

    Here is an example. I uploaded mock html so that you can actually try this code. I think this does exactly what you are asking.
    Private Sub RSWVBAPage_afterPlay()
    Dim tbl As HTMLTable
    Dim tblRow As HTMLTableRow
    Dim tblCell As HTMLTableCell
    Dim strValue As String
    Dim rButton As HTMLInputElement
    ' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
    strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
    ' Strip out the ; for inner text comparison
    strValue = Replace(strValue, ";", "")
    ' This will get the table but can be modifoed to be more specific
    Set tbl = RSWApp.om.FindElement(, "TABLE")
    ' This loops through all the rows in the table until a match to the strValue is found
    ' then clicks the radio button. Findelements allows you to specify a root element
    ' once the correct root row is found, FindElemets can get the correct radio button
    For Each tblRow In tbl.rows
      If tblRow.innerText = strValue Then
        Set rButton = RSWApp.om.FindElement("account", "INPUT", "NAME", , , tblRow)
         rButton.click
       End If
    Next
    End Sub
    I also uploaded the script I created. You should be able to run it and see how it works.
    This should get you going.

  • How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

    how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.

Maybe you are looking for