How to delete the sales org information from BP Master Data in SAP CRM 5.0

Hi Guruu2019s
How to delete the sales org information from BP Master Data in SAP CRM 5.0
Thanks...
Mahesh Pasupunuri

Hello
There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
Regards
Joaquin

Similar Messages

  • How to delete the duplicate email address in BP master data

    Hi,
    When  you get an email ids from the third party vendor and you are loading into CRM BP master data.  how to delete the duplicate email address already exits in the system.  In CRM you can create the same BP with different id.   I would like to know how to delete the email address during importing email addresses from the third party tool.
    During the campaign you are sending email to all your customers, when the customer want to unsubscibe the email address from your list, how to unsubcribe the email address and how to updat the BP master data. 
    If you are sending the email to customer, you are using html or simple text, if the customer wants only html or simple text, how you to specify in the system?
    thanks,
    arul

    Hello Arul,
    welcome to the SDN CRM Development forum.
    1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
    2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
    3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
    Regards
    Gregor

  • How to delet the credit card details from apple id account

    how to delet the credit card details from apple id account

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on your phone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payments link on your account's page.
    Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID)
    If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information?

  • How can delete the serve.bannersdontwork virus from Safari on Mac?

    Hello @all,
    How can delete the serve.bannersdontwork virus from Safari on Mac?
    About every 8-20 clicks Safari opens a webside named serve.bannersdontwork.
    I can not remove this with my Avira antivirus programm.
    Can anybody help me?
    THX
    Hallo an alle,
    Ich habe mir einen Virus eingefangen, serve.bannersdontwork, auf Safari.
    Alle 8-20 clicks öffnet sich diese Seite "serve.bannersdontwork" und leitet mich auf andere weiter.
    Über mein Antivirusprogramm Avira konnte ich den Virus nicht beheben.
    Auch die erweiterung AdBlock hilf hier nicht weiter.
    Wer weiß, oder hat eine Ahnung, wie man diesen Virus wieder los wird?
    Danke schonmal im voraus!!

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Can not open sales order balance from BP master data

    Hello All,
    for a particular customer i am not able to open the sales order balance field in BP master data.
    It is showing the amount but the orange arrow does not appear.
    can any one please tell me why i am not able to drill down into Sales order field in BP master data?
    Thanks in advance.
    Prachi Kulkarni.

    HI Gordon,
    All the users are getting this issue for the particular customer.
    even my self (super user) also not able to drill down into the sales order field.
    we have assigned Professional Licenses to all the users.
    Thanks,
    Prachi.

  • How to delete the Transport Request release from SE09

    Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on  ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
    hope u will help me asap
    thanks
    hardeep

    Hi Hardeep,
    Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
    when u delete a request all the objects saved or locked onto that request are released or unlocked.
    So all the objects that were previously locked or saved onto a req are now ready to save into another req.
    Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
    another option is release the req but do not transport it to target system.
    Regards
    Ellora

  • How to delete the unwanted entries directly from the UWL of MSS

    Hi experts
    I see an unwanted item stuck in WL of approver but not in his
    inbox how can i delete this entry form UWL,ihave tried refreshing UWL but the problem still persists please explain.
    when trying in the dev system
    *I actually applied leave from a test user
    his manager is able to view this workitem in his inbox
    then went into the background SAP and manually completed the workflow
    now if i go to the managers inbox i dont see it there
    but i still see it in UWL
    Could there be any reason for this,Please advice*
    Thanks in advance for your anticipated cooperation

    Hello,
    It is not easily possible to delete the workitems from UWL in MSS except using Batch program in backend ECC.
    Check again in the ECC, the workflow is got trigered and there is surely workitem in the manager's SAP Inbox. Check the tcode swia, enter the workflow task number and the workflow is got triggerred.
    Use swi5 tcode to see the Completed Workitems and to be completed workitems for that Employe (manager).
    The other reason could be.....somebody might hv executed this wf item, but still lying in UWL lists in  MSS.
    Try to re-register the system using UWL Wokflow Administrator in System Administration.
    Hope this helps.
    Regards,
    Anil Kumar.

  • *How to Delete the Old Forecast Versions from Cube & DSO? *

    Hi BI Gurus,
    I am currently designing my BI Model to deliver the APO DP requirements.
    It would be great if some one can give me an Idea how to achieve the below:
    We have a requirement that needs to me maintained the Data as Versions.
    1. We are extracting the Data form APO DP planning area and maintaining the Versions based on the Forecast Version in BI. The Forecast Version in BI will hold the Versions in Calmonth format (MMYYYY).
    2. Load frequency-- Monthly load for (36 months worth of forecast data)
    3. Need to maintain 12 Versions and once we reach the 13th Version (13th load) then we need to delete the 1st Version
    4. Data Flow details:
    Export DataSource(PSA)> W.O-DSO->CUBE
    Your help will be much appreciated.
    Thanks in advance
    Group BI

    Hi Shanthi,
    Thanks very much for your reply. But I am not able to understand your reply.
    My Requirement is: We load monthly once to Standard DSO and Cube form WO DSO.
                    |---> Standard DSO
    WO-DSO-|
                    |---> Standard CUBE
    We generate the Forecast Version based on the System Date (we take Month to Forecast Version Object).
    Example: We started loading form March-2008. We loaded 12 Versions by Feb-2009. When we do the next load which is 13th load, we want to delete the data we loaded on March-2008 from both DSO and CUBE.
    Hope this is more clear now.
    Once again thanks very much for your help.
    Regards,
    Group BI

  • DIAdem: How to store the input channel information from the Analysis modules

    Hi,
    I would like to know if there is a way to store the input channel name(s) when executing modules from the Analysis Panel. For example, when I run an FFT on a set of data: x-channel: "[1]/Time" y-channel: "[1]/Voltage" , I would like to be able to store this information as a custom channel property in the output file (ex. "[1]/AutoSpectrum").  
    The only place I've found that contains this "history" information is in the log section of the Analyze Panel. However, I have not been able to figure out how to access the information in the Analysis log programatically through VBS scripting.
    Thanks

    Hi Brad,
    So here's where I'm struggling. My tool is more a set of tools. I have created custom bars that launch the appropriate dialog box for each tool. Let me give you and example of the kind of work flow I that might be used:
    The user loads up a TDM file or imports data using a DataPlugin. Then, they launch my tool for going through each channel and adding custom properties (sensor type, sensor location, etc). Once all properties have been applied to the channels they close that tool. Now they fire up the Smoothing module in ANALYSIS and save the result as a new channel. Next, they launch my tool for computing the Shock Response for that event. When the user has the desired output, they run my plotting SUD. This is where they can select which report template to use and which channels to plot. The selected channel(s) used for plotting doesn't have all of the custom properties that we taged in the original data channels.
    As you can see, the process involves using some of my own custom SUDs where I can keep track of everything but also allows the user to use any of DIAdem's native functions. This is where I am struggling to be able to keep track of the channels used as input. I can "see" the info I need listed in the log section of the ANALYSIS Panel but can't pragmatically access it (the info in the main display window). It would be really handy if this info was automatically stored in the channel properties of each output channel.
    I guess my only option is to (in the plotting SUD) not only ask the user for the channels to plot, but also ask them to select the coresponding original channels that have the custom properties.
    James

  • Sales order does not extract plant information from material master data

    Hi experts,
    I have created a sales order. However, the plant in the shipping tab can only be manually entered.
    I have made the check:
    the customer material master data does not have the plant info.
    the customer master data does not have it either.
    It is defined in the material master data: sales:general/plant
    But the sales order did not extract this information. Why does this happen?
    Thank you in advance.
    Best regards,
    Fan

    Hello Friend,
    As right stated by you,
    The Plant will be copied from the master data to the sales order, if not it should be manually entered
    The Sequence System will search for the Plant is as follow..
    1. Customer material infor record, If it was not maintained then it will search in
    2. Customer master, if the entre was not maintained in the SHIPPING TAB
    3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
    So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
    This might be the issue.
    Please revert if you want further details
    regards,
    santosh

  • How to delete a submenu menu item from a master page?

    I am having trouble deleting a submenu item from a menu on a master page. I'm not sure where or how it was created, but simply selecting it and trying to delete it, is not working...

    Sub-menus are generated by your site structure. Either delete the page or disable it from menus with the contextual menu. If it's not a page, make a temporary change to the site structure and then change it back to force Muse to refresh, it might be a glitch.

  • How to handle the One-Time Customer Process (Customizations - Master Datas)

    How can we handle the processes of one time customers (for example sales from a store without a warranty process fort he products)? Iu2019m planning of creating a different sales document type and use a single customer number for all of the documents created. On the other hand SAP has a solution for the one-time customers but I donu2019t know its details. Can anybody explain me the standard one-time customer process of SAP (the needed customizations and the master datas to be created)?
    Thanks in advance for the answers....

    Hi..
    the one-time customer is an account group (CPDA) that is used for "walk-in" or "cash" buyers. although this account group can be used for regular sales orders, this is intended to be used with the Cash Sales type of sales documents, where no accounts receivable is created. you also need the one-time customer as a "dummy" and avoid creating many customer masters for buyers who may only do one transaction with your company.
    when you use the one-time customer account group in the Cash Sales order, you enter the one-time customer number in the sold-to party field. the system will then prompt you to enter the actual name (and address) of the buyer. you can have the option of generating SD reports with the real names of the customers.
    you create the one-time customer the same way you do with the regular Sold-to party. there are some differences, in the sense that this is a "dummy" account. you do XD01 or VD01 to create the account, choosing account group CPDA. you also make entries in the sales areas.
    Regds
    MM

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • Custom fields to the sales area tab of customer master data

    Hi Guys,
           i have one requirement, where i need to add Zfields to the Sales tab in sales area data of customer master. Can somebody give me steps how to do it? do we need to do screen programming or just appending KNVV so that functional consultants can do configuration based on account group?
    help would be appreciated
    Thanks in advance
    Siva

    Hi,
         .First in IMG - Enterprice Structure - Definition
    Create the Organisational Units you want to use
    2.Then In Enterprise structure - assignment
    Setup the sales areas you want to use in SD
    Then go to XD01/ VD01 and create a new customer to whom you want to sell goods & service thr a particular sales area which you have already set up in IMG.
    YOu can create a customer master for only those sales areas which you have created in Step 2 above.
    Then create a sales document type VOV8 and then assign sales document type to sales area in which you want to use.
    IMG-Sales & distributin-sales-sales document-sales doc header
    Do all other assignments like item category determination, schedule line category, pricing procedure determination etc
    and then you can cretae a sales document using the particular sales area.
    <b>Reward points</b>
    Regards

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

Maybe you are looking for