How to delete the single record from the ODS
HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay
Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash
Similar Messages
-
How to speed up the deletion of 11million records from the table
Hi,
How to speed up the deletion of 11million records from the table.
I need expiditious reply. Please do the needfull in advising
RegardsPlease try to understand the question.Well it would help if you would answer some of the questions you have been asked as your question is not complete and clear and no matter how hard we try, we really need you to try and ask the question properly.
So as previously asked
Which simply supports the idea that we need:
1) better definition of the business purpose (why)
2) oracle version
3) operating system
4) hardware configuration
to give a moderately accurate answer.
I would like to add
5) How many rows in total in the table to begin with.
6) What is your delete statement
7) Is this a one time operation or will it happen regularly
8) Can you use partitioning. -
Deleting a single item from the trash.
Hello
Is there a way to delete a single item from the trash, while leaving all other items in the trash?I don't believe so and I'm not sure why you would want to.
Items should not be placed in the Trash unless you intend to delete the items. The Trash is not designed for and should not be used as a temporary storage location. -
How to delete a line item from the sales order
Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
KumarHi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx. -
PI 7.1 How to delete a published service from the service registry?
Hello,
I have the same problem in the pi 7.1, like Rahul in CE (Composition Environment) with the deleting of published services.
How to delete a published service from the service registry?
In the WS navigator I found only this operation:
deleteClassificationSystemValues and deleteClassificationSystem
I miss the operation deleteService.
Have you an idea?
Bye
StefanHi all,
I have opened an oss message and now I have an answer:
Use this Service: ServicesRegistrySiService and the operation deleteServices with the logical key of the service as parameter.
The logical key can be seen from the SR UI in the details of the endpoints.
Bye
Stefan -
How can delete my iphone5 data from the date its restored?
how can delete my iphone5 data from the date its restored?
it's unclear what you mean
if you wish to remove your iphone5 data you connect it to iTunes on the computer and click the restore button and choose restore to factory defect -
How to delete an old network from the list on the iPad?
Anyone know how to delete an old network from the listing and then add a new one? I did it when I first got my iPad and cannot remember how I did it! Hey, I'm an Apple rookie but I am trying. Take care and thanks in advance for any help.
Setting > General > Reset > Network Reset
-
How to delete 100+ released requests from the import queue?
Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
ThanksTo delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5. -
How to delete a single request from DSO in BI 7.0
Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
PrathapIN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk -
How to delete a particula record from InfoObject
Dear All,
I got some problem situations and would like some suggestions from any of you.
<b>Problem detail</b>- one process chain was failed due to could not activate an ODS-A
- ODS-A and ODS-B contained InfoObject-0BP_GUID
- errors were found and referred to the InfoObject-0BP_GUID.
- The errors referred to one record composed of incorrect data. I still wondered where it came from since normally, 0BP_GUID keeps only guid.
I'd like to delete the incorrect record.But I do not want any impact to InfoProviders.
I'm not sure how to resolve this case. This has to be very carefully managed because it happened on production system.
Actually, I did find one thread in this forum "Delete SID table content". But I'm not sure whether it could be applied to my case.
Any suggestion would be appreciated.
Thank you very much.
-WJ-Unfortunately you cant delete data without inpacting the data in the. This is how BW works and you will appreciate this because youur transaction data is secured and you wont face any data issues later on. Let me give you an example. Lets sa your ODS or cube stored sales data and in the ODS you have sales org, customer and amount. When you run the report, data is read from this cube /ods, but to fetch the master data it goes to the master data tables via SID. When the transaction data gets loaded and when you try to delete a record in master data, it will let you do.
If you still wish to do, proceed as follows:
1. Delete the data in cube first.
2. Delete the particular record from the master data table.3
3. Reload the data to the ODS / cube.
Without deleting the transaction data in the ODS / Cube the system wont let you delete the data in master data and you will get any of the following messages.
(a) " not all master data could be deleted
(b) "the master data can not be deleted".
Ravi Thothadri -
hi friends,
i am working in flex 4 mxml web application with action script....i am using a data grid and one delete button outside the gird.
i have two records in the same name in grid, when i click one record from the grid and click delete means that time ,both records will delete from that grid
which record having the same name..
how to do this?
any useful suggesssion or snippets code for this..
Thanks in advance,
B.venkatesan.hello,
first get the length of the datagrid.
suppose your datagrid id is db and you want to delete the the row which have same name .....
first get the selected row and from that name of the selcted row.
supoose selected name is
var index:int=db.selectedindex;
var selname:string =bd.dataprovide.getItemAt(index).name;(name id datafield of the column).
now you got the selected name search for the same rows in datagrid.
var totallen:int=(db.dataprovider).length;
for(var i:int=0;i<totallen;i++)
var checkduplicate:string=bd.dataprovide.getItemAt(i).name;
if(checkduplicate==selname)
db.dataProvider.removeItemAt(i);
this will delete all the row which are with same name with selected row name...
Gajanan Hiroji | [email protected] | www.isacglobal.com -
How to delete the child record from the database
how to delete a parent and child record from the database can we do it in the servlet and my database is oracle
I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.
-
How to handle the failed records from the table when using DB Adapter
Hi,
I am reading some records from table using DB Adapter inside my synchronous BPEL process. Say like reading 100 records from table in between after successful reading of 90 records an error occured in 91st record due some various reasons(like DB down, Connection interrupted etc.). Then how to handle this situation, whether i have to read all the records from the begining and is there any option to continue from where it stopped reading.
Can please anybody help me out in the regard?
Thanks in advance
Regards,
Aejazwe had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M. -
How to delete a shortcut favorite from the browser in the WORK Area
Hiho,
creating a shortcut favorite icon of a browser-website in the work area shows up a symbol to use this shortcut. In the private area I can delete this favorite-symbol by tapping longer on the icon an a trashcan shows up, so I can delete the icon (and the browser favorite from the private area). Not so in the work (buisiness) part of the BlackBerry, there is no possibility to delete this icon. I can't find a policy on the BES10 server or thomething on the Z10, any ideas how i can remove the icon?
Greetings... IfraniHi Ifrani!
I´ve the same problem on my Z10!
CommanderApollo -
How to get first 10 records from the database using JSP
i want ot get first 10 records from the database and then after clicking the next button in the page,it must show the next precceding 10 records from the database.i am getting the first 10 records .but how to post to the same page to get another preceeding 10 record.
Search the forums - this has been asked a lot. I usually recommend experimenting with tops and order bys until you're satisfied.
Kind regards,
Levi
Maybe you are looking for
-
How to display URL images and URL link (html) from Smartforms?
Hi Gurus, I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the
-
My mid 2010 macbook pro 13 inch screen is cracked, how much will it be to fix?
My mid 2010 macbook pro 13 inch screen is cracked, how much will it be to fix?
-
Why can i not open mobi formats
Why can i not open mobi files with adobe
-
Only bass from my P7800 7.1's
Hey everybody,?Newbie here. I bought my P7800 speakers a couple hours ago and nothing seems to want to play except for the front speaker and the subwoofer. But the front speaker only plays anything when I run a diagnostic test on my sound card and th
-
Oracle Database 9.2.0.1 on Window 8 server machine
Hi guys! I have problem with installation of Oracle Database 9.2.0.1 on Window 8 server machine. I need installation Guide of Oracle Database 9.2.0.1 for "Windows 8" server Machine. anyone can help me how can i install?