How to delete the transparent frames that Pluraleyes adds to replaced audio clips in an event ?

Hi there,
I have a workflow issue working with Pluraleyes 3 and FCPX.
MY CONTEXT
So I imported all my clips into FCPX (about 300 from camera 1, about 300 from camera 2 and separate audio which ran almost with only very few interruptions on set).
I synced everything with PE which gives me back the following :
1. a new Event with replaced audio clips.
2. a new Event with one giant multicam clip.
3. a new project completely synced BUT with the non-replaced audio clips
MY PROBLEMS
1. Problem is that the clips have additional transparent frames before and after their actual video (i.e. PE makes new clips from video and longer bits of audio that do not begin/end at the same time).
2. The giant multicam clip has plenty of chunks where audio was recorded but where no video was.
MY QUESTIONS
PE has created plenty of useless clip lengths. How can I get rid of them with some batch process ?
OR if I say that another way
How can I create an EVENT that contains clips with the exact same length as the originals, only with the corresponding audio replaced ? (Please remind that I have LOTS of clips)
Moreover, the clips within the new events created by PE have (not surprisingly) lost all keywords I gave to the clips before syncing with PE. Is there any way to fix this ?
Thank you so much because it feels like PE's job is kinda useless  :-/

It's the Shift key. It's not a button. It's shifts from lower case to upper case when typing. It's been called the Shift key since the 19th century.

Similar Messages

  • Hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

    hi, since the last update i find my rented movies remained under rented although unplayable. now i find some, as before the update, are deleting fully - can anyone tell me how to delete the unwatchable covers that remain?

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How to get the users list that can Add/Remove or modify Vendors in Oracle?

    How to get the users list that can Add/Remove or modify Vendors in Oracle?
    I need to generate a report like name and responsibility. Thanks

    That query gives the Supplier information.
    But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
    I assume it should be based on the Responsibility.

  • How to delete the iCloud account that is linked to my gmail account.

    Recently I bought the Iphone 5s. I created a new icloud account during the set of the phone. Unknowly it is linked to the Apple ID i used. Whereas there is another icloud account im using that i would like to link with my Apply ID then the newly set up one.
    Anyone has the answer? Been trying for hours.

    Deleted.
    Message was edited by: randers4

  • I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downlo

    I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downloaded the new version of Firefox. I just want the old version of it back since I apparently can't download the Adobe stuff that is necessary to keep my computer safe from Hackers. It sure would have been nice to know there was an issue with the new Firefox Update BEFORE I uploaded it. I have Vista which is usually an issue with both Adobe and Firefox. I don't seem to be able to run much of Adobe at all on my computer because of the Vista.
    == This happened ==
    Every time Firefox opened

    I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

  • Does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

    does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

    Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

  • HT2905 Most all of my 1700 songs have been duplicated in iTunes. I have downloaded the instructions how to delete the duplicates but it says "sort by the date you added" and i have no column that says that. I am running windows xp.

    Most all of my 1700 songs have been duplicated in iTunes. I have downloaded the instructions how to delete the duplicates but it says "sort by the date you added" and i have no column that says that. I am running windows xp.

    Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
    tt2

  • How to delete the photo-storage (phone shows that 21GB is used but no photo is on it) ?

    How to delete the photo-storage when phone shows 21 GB used and no photo is on the phone?

    Look at 'PhoneClean'
    <http://www.imobie.com/phoneclean/download.htm

  • How to delete the data from partition table

    Hi all,
    Am very new to partition concepts in oracle..
    here my question is how to delete the data from partition table.
    is the below query will work ?
    delete from table1 partition (P_2008_1212)
    we have define range partition ...
    or help me how to delete the data from partition table.
    Thanks
    Sree

    874823 wrote:
    delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
    Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
    How the table implements its structure is a physical design consideration.
    Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
    When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
    And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
    Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
    This is a crucial concept to understand and get right.

  • How to Delete the dimension from the cube ?

    Hi ,
    how to Delete the dimension from the cube ?
    i have added the new dimension by assiging one characteristic to that dimension .
    now i  want to delete it ,
    but system saying that   Dimension ZXXX  contains InfoObjects; deletion not possible .
    how to delete it ? any help .
    Thanks

    Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
    Right click on the cube-->Delete data.
    Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
    Then right click on Dimension-->Delete
    Regards,
    Pavan

  • ADF Desktop Integration : How to delete the table in Excel?

    Hi,
    I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
    I could not find a way to delete that table.
    I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
    My question how to delete the table not corrupting the Excel.
    Thanks
    Pavan

    Pavan,,
    Welcome to OTN.
    You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
    Refer the documentation for more info.
    http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
    -Arun

  • Reg:How to delete the column in table control also from database table.

    Hi Experts,
    Once again thank u all for giving the responses.
    one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
    With Regards,
    Saroja.P.

    Hi,
    If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
    "This portion of code inside the LOOP...ENDLOOP.
    IF sy-ucomm eq 'F_DELETE'.
       gt_itab2-check = mark.  " Store the MARK field status into your internal table's correspoding field 'check'
      MODIFY gt_itab INDEX tabcontrol-current_line.
    ENDIF.
    iF sy-ucomm eq 'DELETE1'.
      DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
    ENDIF.
    Now you can modify your database table using the MODIFY statement.
    MODIFY ZDB FROM TABLE gt_itab.

  • Does any one know , how to delete the others in itunes. it takes lot of space

    does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

    Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
    There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

  • How to delete the old code in the EXIT_SAPLRSAP_001

    Hi All,
    In R3 system, I wrote an exit for 2LIS_11_VAHDR  by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
    and can we create new project and can we assign to the Enhancement RSAP0001.
    Can anybody suggest me in this
    Thanks in advance......
    Narendra

    Hi Narendra,
    You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
    SE38>zxrsau01>change-->find out your data source
    Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
    If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
    Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
    Hope it helps
    Thanks
    Teja

  • How to delete the beta version in icloud?

    I purchased iWork half an year ago and I use it in icloud. But since the beta version has appeared, it´s not possible to work with my own software. Who knows how to delete the beta version from icloud?

    You can't delete it.
    Why do you need to?  Why can't you just work with your documents like everyone else does, by opening iWork software on your Mac and using File > Open, etc to see your docs that are in iCloud?  Why would you need to use your browser?

Maybe you are looking for

  • How to print Last Page Balance on Next Page Header

    I am using Report 3. I have three field in my repeating frame. 1. received 2. issue 3. balance Balance Field is running total of received and issue. I just want to print balance outside of my repeating frame at the end of page and then in header of n

  • Printing multiple sizes from a PDF - Choose page source by PDF page size is set

    I've tried this in both Reader 7 and 8.1. What I am experiencing is this: A user is printing a document which has both legal and letter sized pages. I have selected Choose page source by PDF page size when printing. The document will print all pages

  • No sound with avi files

    I have Quicktime 7.2 as well as DivX Player. I have also downloaded FlashPlayer and Flip4Mac But I cannot read properly some avi videos. Some work very well but I don't have the sound (but I do have the image). What do I need to do??? Thanks Manu

  • My sister is  getting my messages!!!!

    I got an iPhone 5c for Christmas. So I gave my sister my iPhone 4 since she needed a new phone. I used my information to set up both of our phones. After awhile my sister started getting every single message I was getting and even sees everything I s

  • Does EAS needs to running for Business Rule Migration

    We are having issues with EAS server in one of the env, so it is offline. The user wants to access BR from that env, so EAS server needs to be running for migrating those BR using LCM or LCM would connect with the Database repository for the migratio