How to determine Firewire chipset?

I'm trying to determine which chipset my Macbook/Leopard 10.5 is using for
Firewire. This comp was purchased less than 2 weeks ago, and I have
gotten information that says Apple switched from Texas Instruments to
Lucent chipsets, which are not compatible with most audio interfaces.
This comp was purchased for being an audio/MIDI production machine.
When I go to System Profiler/FireWire, it only tells me:
FireWire Bus: Maximum Speed: Up to 400 Mb/sec.
That's it -- no manufacturer information or versions, etc.
Is there another way to determine the chipset? Perhaps some Terminal
command?
Thanks!

Restart your computer while holding down control-command-V simultaneously. That should give a stream of information which includes the FireWire chipset. It flashes through quickly before OSX loads up regularly.
I've got the current MacBook Core 2 Duo 2.2 GHz. It says "FireWire (OHCI) Lucent" on the left, halfway down.
I'm sure that they went with Lucent for all the current MacBooks. A FW chipset isn't a commodity part like a hard drive, and the logic board would have to be designed around the specific package type and pinout of the chipset.

Similar Messages

How to determine which chipset my Satellite L300/700 has?

I have a SATELLITE L300/700 (PSLB8A-047004). The User Guide covers several models. It indicates that the chipset determines which memory modules I need for a memory upgrade. How do I find out which chipset I have, please?
Kev.

> I'm still curious about how to determine which chipset I have - any thoughts?
Go to the device manger and click on IDE Ata/Atapi controllers:
http://img814.imageshack.us/img814/7321/chipset.jpg
There you will see your chipset installed on your laptop. In my case, as shown on the screenshot is Intel ICH9m

How do i see what firewire chipset I have?

I want to know what kind of firewire chipset i have in my G5 (late 2004).
I have a problem with my MOTU firewire interface but i cannot find the kind of firewire chipset i have inside my powermac.
Tim

It's likely a problem with the external device not the computer (unless the computer's motherboard has defective FireWire ports.) For external devices the best chipsets are Oxfords'. But the Oxford chipsets are mainly used on the bridge boards used in external drives.
Contact the MOTU tech support for help.

GX720 Firewire Chipset type & 64 bit drivers

Hello all you MSI tech Guru's
I have a couple o quick questions about the FireWire port in my GX720.
my story is this:
I have had to install Win 7 64 bit on my GX720, as some of the applications i work with require a 64 bit OS for them to function correctly (not for the extra ram, they will not install in a 32 bit OS)
I realize that there is no official support for Win 7 64bit on this model of notebook, but using generic drivers, I have gotten 90% of it working (only the intel mass storage, TV cards and 1 "unknown device" are missing drivers).
pretty much everything is working exactly how I'd expect it to in the 64bit environment (including basic use of my FireWire port), however.....
I also run a high('ish) end FireWire audio card (A MOTU Ultralite MK3 for those keen on sound) and am having some unusual issues with it (freezing of audio playback in multiple applications every couple of seconds ), after chatting to some audio experts, they have indicated that the issue may be with the FireWire chipset on the notebooks main board or the FireWire driver for the notebooks Chipset (I am exploring the audio cards role in this error too and an email has been sent to MOTU tech support).
Can anyone tell me:
a.) what the firewire controller chipset make (eg. Texas Instruments, Ricoh, Intel, ect....) & model is ?
b.) is there a generic win7 64bit driver that can be installed for it (instead of the default one that windows uses) ?
Thanks in advance, Kind regards
-Hypalync

Quote
b.) is there a generic win7 64bit driver that can be installed for it (instead of the default one that windows uses) ?
Windows already includes a generic FireWire (IEEE1394) controller driver. There is nothing else to install or update.

Macbook pro models with "Texas Instruments" firewire chipset

Hi
Please, anyone knows wich macbook pro models(MA896LL/A, etc..) in 2007 and 2008 have "Texas instruments" or "Agere" firewire chipset?
Overall between MA896LL and MA896LL/A (mid 2007 and late 2007)
Thanks

Well, I've run a few tests, and learned something new.
CS6 on my MacBook Pro has three acceleration modes now: Software, Hardware (OpenCL) and Hardware (CUDA).
I've run software only... not so great. Then I ran Hardware Open CL, and it "acts" like CUDA did on my Mac Pro with GTX 285... bars that were red turned yellow, and some things ran without rendering! I was pretty surprised by this, as I have only 512MB VRAM, not 1GB VRAM on the 650M.
This is only my not-very-serious edit-on-the-road system, so I didn't spec it out to be a monster editing laptop, but I'm extremely pleased by how well it runs with CS6. I have two very nice, new SSDs inside; one for OS X/apps, and the other for media, as well as 16GB RAM. Each SSD runs at 500MB/sec +/- whether read or write, despite the second SSD being in the space where the optical drive was.
It's too bad there's not just a *wee bit* more space where the optical drive was... or I'd try to stuff THREE SSDs inside, and RAID two of them for media.
So far, I'm really pleased with how well it works with only 512MB VRAM, which was the question I had wanted answered.

How to determine logical database in a program?

Hello guys!
How to determine logical database in a program on Eclipse?
I have not found any options:
Thanks!

Welcome to SDN
Check the table RSOSFIELDMAP
Assign points if useful
Regards
N Ganesh

Anyone know how to determine Macbook Air screen tech? Causing migraines

Hi There,
Last year, I expereinced a lot of mild migraines which I've traced back to a new Macbook Air.
At first I had no idea of the cause (diet, stress etc) but have noticed that my eyes feel uncomfortable looking at the screen of my Macbook Air (I don't have this issue with my Dell monitor).
My eyes don't hurt per se, but I can detect a sublte jittering with the screen - which can turn into a migraine.
After doing a bit of research, it seems like most (but not all) LCD and LED LCD displays use something called pulse-width modulation to control brightness but after calling Apple support, they told me my MBA doesn't use this technology.
Does anyone know how to determine the underlaying technology in Apple displays so I can research the cauase of my headaches? I found a good Ukranian website (in english) that explained pulse-width modulation but it didn't really talk about other technologies.
Any pointers in the right direction would be much appreciated.
Cheers
Ben

What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor:

How to determine whether a recordset is Empty or not ?

Please see my snippet code below :
<%
 String sql="";
 String username="CDS";
 try
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 Connection con = DriverManager.getConnection("jdbc:odbc:Employees","","");
 Statement stmt = con.createStatement();
 ResultSet rs=null;
 sql = "Select * from Employee where code='" + username + "'";
 rs = stmt.executeQuery(sql);
 rs.next();
 if (rs==null)
 %>
 <jsp:forward page="Login.jsp?msg=Username not recognized"></jsp:forward>
 <%
 else
 %>
 <jsp:forward page="Login.jsp?msg=Halo"></jsp:forward>
 <%
 catch(ClassNotFoundException e)
 out.println("Driver not found");
 catch(SQLException e2)
 out.println(e2.getMessage());
 out.println(" ");
 out.println("Wrong SQL Statement");
 out.println(" ");
 out.println(sql);
 out.println(" ");
 %>How to determine whether a recordset has no result ?
From the above code, i use if (rs==null) and that's not worked.
Help me, guys.

ResultSet rs = stmt.executeQuery(sql);
if (rs.next()) {
%>
 <jsp:forward page="Login.jsp?msg=Halo"/>
<%
} else {
%>
 <jsp:forward page="Login.jsp?msg=Username not > recognized"/>
<%
}

Integration MIRO error, how to determine the VST related accounts.

integration Miro error.
Hi gurus,
please resolve the problem urgent.
while doing MIRO Iam getting the following error.
after given PO number in MIRO I getting the following error. please how to resolve the problem.
where i can determin the accounts, which accounts will be effect.
Error in account determination: table T030K key ASHA VST V0
Message no. FF709
Diagnosis
In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
Procedure
Contact your system administrator.
Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
To do this, choose Maintain entries (F5).
How to determine VST

I have already replied to the same question in one of ur earlier posts.
If you want to knowthe GL accounts which are used presently for the transaction VST, you can go to table T030K give the field name KTOSL value as VST and execute. YOu will get the list of all GL accounts which use the transaction VST for all possible tax codes and Chart of Accounts.

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine most recent date from the date column of internal table

Dear friends
would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and time to determine which record is most recently changed...
here the scenario is.
id idnumber chdate chtime
1 123456 20060606 135312
2 123456 20060606 135900
3 123456 20060606 132300
4 123457 20060606 140000
5 123457 20060606 142500
in the above scenario i must keep in my mind that the most recently changed record is identical to its idnumber i can say that:
the record should be fetched this way
id idnumber chdate chtime
3 123456 20060606 132300
5 123457 20060606 142500
because here the id 3 is the most recently changed in the idnumber 123456
where id 5 is the most recently changed in the idnumber 123457
please help me to determin how i am supposed to carry out this task any suggestion, code will be great help of mine.
regards
Naim

After testing my suggestion above, I realized that it doesn't work because the delete adjacent actually will keep the first one and delete the rest. I'm working with Srinivas's code a bit now, I think it is almost what you want. I am under the impression that you dont' want to HIGHest date/time, but just the last record of the sequence, if this is the case, then this code will help. Here we will assign an index to each record per the idnumber, that way we can sort it and get the lastest record.
report zrich_0001.
types: begin of itab_type,
 id type i,
 idnumber type i,
 chdate like sy-datum,
 chtime like sy-uzeit.
types: end of itab_type.
types: begin of itab_type2,
 id type i,
 idnumber type i,
 index type i,
 chdate like sy-datum,
 chtime like sy-uzeit.
types: end of itab_type2.
data: itab type table of itab_type with header line,
 itab2 type table of itab_type2 with header line,
 prev_rec type itab_type.
data: v_id type i.
start-of-selection.
itab-id = 1.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '135312'.
append itab. clear itab.
itab-id = 2.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '135900'.
append itab. clear itab.
itab-id = 3.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '142500'.
append itab. clear itab.
itab-id = 4.
itab-idnumber = 123457.
itab-chdate = '20060606'.
itab-chtime = '140000'.
append itab. clear itab.
itab-id = 5.
itab-idnumber = 123457.
itab-chdate = '20060606'.
itab-chtime = '120000'.
append itab.
clear itab.
 data: counter type i.
* Assign an index to each row per idnumber
loop at itab.
 on change of itab-idnumber.
 if sy-tabix > 1.
 clear counter.
 endif.
 endon.
 clear itab2.
 move-corresponding itab to itab2.
 counter = counter + 1.
 itab2-index = counter.
 append itab2.
endloop.
* Sort it and get rid of older records.
sort itab2 by idnumber ascending
 index descending.
delete adjacent duplicates from itab2 comparing idnumber.
read table itab2 with key idnumber = '123456'.
write:/ itab2-chdate, itab2-chtime.
read table itab2 with key idnumber = '123457'.
write:/ itab2-chdate, itab2-chtime.
Regards,
Rich Heilman

How to determine cursorline in table control

Hi,
Every time an entry is inserted in the table control i need to put the cursorline in the next line.
It is ok while you are using the initial lines of the table control but when you use the scroll it is gone.
The complet scenario is:
- my table control is created with 5 lines.
- Every time the user inserts a line, a new line is created (so you will have always 5 lines behind to complete)
- when the 5th line is inserted, if you want to fill the 6tn you have to use the scroll
- In this moment is when i dont know how to determine the cursorline. It will be different depending how much de the scroll is moved. Maybe the correct cursorline is 5, or 3 or 2... Do you know how i can determine it? Is it possible?
Maybe the way would be to move the table control (scroll) one position and always cursorline would be 5, but i dont know if it possible neither.
Thank you,
Manel

Sorry misunderstood the question.
You will have to use the variable topline from the tablecontrol.
Edited by: Pedro Guarita on Feb 10, 2010 5:25 PM

How to determine IE type(32 bit or 64 bit) in a task sequence while updating Java

How to determine IE type(32 bit or 64 bit) in a task sequence
Hi,
Currently i have to update new version of Java after removing all the previous existing version of Java by using TS in SCCM 2007.
we have both 32 bit and 64 bit browser in the environment. I am stucked in determining whether the browser is of 32 bit or 64 bit.
How to determine IE type(32 bit or 64 bit) in a task sequence so that respective java can be installed for that IE browser.
will highly appreciate quick response.
Thanks in advance.
Daya

But you also need to install JRE x86 on x64 systems, since most people actually use the 32bit browsers on x64 systems.
The detection logic is actually pretty simple -- just check the right registry hive to find the installation location of the BIN\JAVA.DLL. Both pathnames are stored in HKLM\Software\JavaSoft\Java Runtime Environment\1.7 in the registry value "JavaHome",
but the x86 path is stored in the 32-bit hive and the x64 path is stored in the 64-bit hive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How to determine the target system during runtime of a Generic DS?

Hi Experts, good afternoon.
I am coding a Generic Extractor using Function Module. I have to select the field TIMESTAMP on table ROOSPRMSC. To do so, I need the value of RLOGSYS that is the BW system that is calling the Extractor.
Do anybody knows how to determine via ABAP the RLOGSYS (Remote Logical System) during the runtime of the Generic DataSource Function Module?
The table ROOSPRMSC keep the TIMESTAMPs values of the last delta upload for each DataSource and for each BW target system. As I have 2 BW's loading data from the same SAP ECC system, I need to know, during runtime of my Generic DataSource, the actual system that is requesting the delta. That's the reason why I need to know the BW's logical system name that is "runnig" the delta InfoPackage.
Plese, help!!!
Thanks in advance!
Leandro Vani

Leandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck.

How to determine the Docid

I would like to open a web intelligence detail report I created from within an xcelsius dashboard.
However, I can't use the FS command button or URL buton, because I don't know how to determine what the document id for the webi report is. I've gotton lost wandering around the business objects website. Since our company is new to BOBJ, no one on the project team is quite sure how to do this either.
Can anyone point me in the right direction. I'm not a .net or web services developer. I just create universes, webi reports and dashboards.
Thanks.

I can provide you with this tip:
To obtain the document ID, navigate to the document in InfoView, hover your mouse over the document name hyperlink, and look for the ID number in the browser's status bar. You can also obtain the document ID from the Central Management Console.

How to determine Firewire chipset?

Similar Messages

Maybe you are looking for