How to determine the changes in Acrobat SDK version.

Hi
Please let me know how to determine the changes in an Acrobat SDK version w.r.t. the previous one.

Hi,
The easier way is to read the SDK documentation : What's New for Acrobat SDK.
Regards,
Joe

Similar Messages

How to Determine the Oracle Identity Manager Server Version?

Friends,
I have two questions about the Identity Manager...?
How to Determine the OIM 11g Server Version?
How to Determine the OIM 9 Server Version?
Thanks

The bundle patches are found by build number. If you go to metalink and check the bundle patches, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. This is written to the XSD table during patching. Once installed, there is no identifier that says "BPXXX applied".
-Kevin

How to determine the size of the JVM process?

Hi,
How to determine the total process size of the JVM process (that includes Heap, Non Heap and Native memory)?
Is there any command to obtain this value on Solaris (for Sun JVM)?
I refer the process size to http://middlewaremagic.com/weblogic/wp-content/uploads/2010/11/Java_Heap_Diagram_12.jpg) here.
Many thanks for your help in advance!

Hi,
Make sure that Total Heap + Native memory will be consider as total Memory.
That means in 32 bit you will have only at most 4 GB for process + additional 2 GB for OS.
So let assume if you have 4GM RAM then out of the 4GB you can allocate 2GB as Heap and 512m as Perm in case of Hot spot and remaining will be consider as Native memory.
But in case of 64 bit will change you will have good amount of the memory so you can use plenty of Heap and Perm size.
Still if you have query let me know.
Regards,
Kal

How to determine the u2018equivalent position of the same organizationu2019?

Hi,
"Position change is a transfer from one position to an equivalent position within the same org reporting structure and under the same chief position"
How to determine the u2018equivalent position of the same organizationu2019?
Cheers.

u can identity the position with help of the Holder
say for ex: A is the holder of the Position for Executive now the user performent an event called change of position so he changed to Manager (here we can find the chageing on the basis of some parameter so i have taken holder as Parameter as we dont know which has changed or wht has changed)
in this case we can use the report RHDESC20 se38
not an exact solution for ur question
will try to find some other way

How can determine the duration of an audio file

Hi,
i'm making speech recognition project using java. i can capture sound by michrophone and playback it. the type of the sound is .wav.
my question is how to determine the recording duration (for example: determine the duration for 0.25 second) because i must recorded syllable,the assumtion is needed less than 0.5 second to say a word. and then.. can this wav file be changed into... binary or integer ?
thanks for your help

FYI I'm newbie in Java,
Yes, I want to limit the audio file lengths to a certain value. What should I do?
I have read wav file using an AudioInputStream, for audio format I'm using sampleRate = 8000.0F and sampleSizeInBits = 8. My friend said if I used 8 bit for sampleSizeInBit (resolution in amplitude) the binary file should be -128 till 127 in range according to the bit. I try this code and the result is binary file which is zero, positive, and negative.
the code
try{
audioInputStream.read(audioBytes);
for (int i=0; i<audioBytes.length;i++){
System.out.println(audioBytes);
catch(IOException ioe){
System.out.println("Error"+ioe);
I'm not sure that the code is right, but it works. Should I change the audioBytes into integer before? I try this code but it doesn't work.
int a = new int[audioBytes.length];
for (int i=0;i<audioBytes.length;i++){
a[i] = new Byte(audioBytes[i]).intValue();
this binary file has been printed in console (Im using texpad). So, how I can write that to file.txt? I'm using FileoutputStream but it doesn't work correctly. Here is the code
FileOutputStream fos = new FileOutputStream(strFilePath);
{audioInputStream.read(audioBytes);
fos.write(audioBytes);
catch (IOException ioe){
System.out.println("Error"+ioe);
When I open file .txt is read as character like this üüüüüüüüüüüüûüüüûüûûû ||||||| ||||||| ||||||||||||||||||||||||||||| ےےےےےےےےےےےے (like using alt plus number)
Edited by: anasfr on Mar 19, 2009 9:02 AM

How to call GUI/Dialog in Acrobat sdk Plugin

How to call GUI/Dialog in Acrobat sdk Plugin using VC++ here is my code
ACCB1 void ACCB2 MyPluginCommand(void *clientData)
HMODULE hAppInst = GetModuleHandle(NULL);
DialogBox(hAppInst, MAKEINTRESOURCE(IDD_DIALOG1), NULL, NULL);
HWND hWnd = ::CreateDialog(hAppInst, MAKEINTRESOURCE(IDD_DIALOG1), NULL, DlgProc);
::ShowWindow(hWnd, SW_SHOW);

You can, with care, use Windows API calls in a plug-in. But you have to understand the process of loading resources. In particular, the calls you use try to load resources that belong to the main executable, which is Acrobat.exe. Plug-ins have their own instance handle, which is conveniently stored in gHINSTANCE.
In certain cases, especially modeless dialogs, there may be extra calls to make things work properly.
You do need to know how to use the Windows API, and your sample lines seem confused, unless you intended to first display a modal dialog then open the same dialog as modeless. That's something for another forum,

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the field size

I am going to make a multiplatform application that hopefully
will run on linux and windows 2000.If the os is 2000, then I will use
vb.net/aspx else I'll use java servlets. I make the connection
to the web server ( through HTTP) not directly to database server.
So, the resultset will be stored in the String object. The columns
will be separated by delimeter. Our problem is how to determine
the size and type of the fields of mssql,oracle and postgres database
so that we can include it in the String object.
Ex.
String sResultSet=new String();
ResultSet rs=statement.executeQuery(sSQL);
while(rs.next()){
sResultset=sResultSet + rs.getString(field1) + "||" + rs.getString(field2) + "||";
vertical bars acts as delimeter
supposedly this is the code:
sResultset=sResultSet + rs.getString(field1) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||" + rs.getString(field2) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||";
supposedly this is the code if rs.getFieldType() and rs.getFieldSize() methods are existing
Anyone can give me an idea how to get the field type and field size of the database?
thanks in advance

Yes, but I dont know how to do it.
Can you give me an example of using it.
Thanks in advance

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

How to determine the type of the jobject... similar to instanceof

hi,
I would like to know how to determine the jobject reference of an instance is of which class.
this is something similar to instanceof we use in java.
is there any thing like 'instanceof' in JNI. if there how to use it?
i got this as objective question for which answers were(i do not remember exactly)
1.instanceof
2.assignedto
i could nt het much help in googling.
thanks in advance

Hi
The JNI provides a native version to the java instanceof operator, this function takes two arguments
an object refrence and a class refrence and reports JNI_TRUE.
jclass myclass = env->FindClass("your class name");
if(env->IsInstanceOf(obj,myclass) == JNI_TRUE)
// obj is of type myclass
}Regards
pradish

How to determine the changes in Acrobat SDK version.

Similar Messages

Maybe you are looking for