How to determine the SAPS for Systems

HI, I have the cuestion concerning to value SAPS
I need to know the value = 600 SAPS
value memory = ???
value CPU   =  ????

Hi Eli Daniel Ramones,
You should do the sizing of the sap system that you want to install, depending of the paramteres yoy obtain a several SAP units, that will be converter for your hardware vendor as a specified machine, that you need.
https://service.sap.com/sizing
good luck

Similar Messages

  • Call RFC for Lookup from BPM. how to determin the correct target system

    Hi
    I have a scenario where i am sending a sync call to SAP R/3 to fetch some sata using the BPM.
    The issue is I can have multiple SAP systems so to determin the SAP system for the correct lookup is necessary.
    in the rec determination step of Config I can configure multiple receivers but this isthrowing an error saying the multiple receivers cannot be determined for sync step.
    Any idea why is such an error occuring
    Regards
    Nikhil

    Nikhil,
    Multiple Receivers cannot be configured for a Synchronous Interfaces. reason is that when you are sending the request message to the target systems, XI will recieve multiple responses for one request and this is aginst the concept of Synch Message Processing.
    You will have to have an option of determining the receivers inside your BPM and using separate Send Steps for each of these.
    Regards
    Bhavesh

  • How to determine the values for Model Parameters in Forecasting

    Hello Gurus,
          On basis we will determine the values  for the Model Parameter values (Alpha, Beta, Gamma, Sigma).
    Thanks,
    Siva.

    Dear Siva,
    the values are dependent from the forecast stratey and forecast model.
    The forecast strategy determines the method or the techniques that are used to create the forecast. You set the forecast strategy in the forecast profile.
    There are some settings that you must make for certain forecast strategies. The table below shows you which settings these are. You make these settings either in the univariate forecast profile or under the Model and Parameters tabs of the Forecast view on the demand planning desktop.
    Model initialization is the process by which the system determines the necessary model parameters for the chosen forecast model. These parameters are in following link:
    http://help.sap.com/saphelp_scm50/helpdata/en/ac/216b74337b11d398290000e8a49608/frameset.htm
    I hope this helps you further.
    Regards,
    Tibor

  • How to determine the sender business system for ABAP client proxy

    Hi All,
    I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
    Is it the logical system which is reflected in Technical System?
    let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
    And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
    If no, please correct me.
    Thanks in advance
    Leo

    Hi lawrence
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
    Regards
    sandeep

  • How to determine the week for credit management?

    Is there a transaction that will show the week for which credit is determined. For example, when running RVKRED88, it shows the week the order is processed under.

    Hi Rocha,
    In Credit management S066 and S067 information structures play a vital role in updating the credit values of a customer. This works in tandem with the update group present in the OVA8 settings in case of automatic credit check.
    When an order is created S066 information structure and OEIKW field is updated which increases open order value. when order is delivered S067 information structure and OLIKW field is updated which increases open delivery value and decreses S066-OEIKW
    When delivery is billed S067-OFAKW value (Open billing)gets increased and S067-OLIKW gets decreased.
    Updation is through the information structures S066 and S067.
    In the transaction code OMO1 select the information structure and double click it. You will be faced with parameters pop-up.
    In this pop-up you have radio buttons day ,week  and Month. _Based on the value you choose here you will get day or week or month for the Period split: info structure field present just besides horizon field of dynamic credit check in OVA8 Screen_If you choose week it will be till the end of the week and if you choose Month it will be end of the month. it is how system considers.
    For example if we have created an order today i.e. 19/08/2011 and the Period split: info structure in the OVA8 has 1month.
    System evaluates dynamic credit check as today's date + one month =19/09/2011which is =30th september,2011.
    So while evaluating credit for the order, system will consider all the open orders whose  delivery date is on or before 30th september + open deliveries + open bills + A/C receivables.
    Edited by: mokirala tilak on Aug 19, 2011 11:00 AM
    Edited by: mokirala tilak on Aug 19, 2011 11:23 AM

  • How to determine the mount point for directory /tmp ?

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
    "Free Space: Rac2: /tmp"
    Cause: Could not determine mount point for location specified.
    Action: Ensure location specified is available.
    Expected value: n/a
    Actual value: n/a
    I have checked the free space using the command:
    [root@Rac2 /]# df -k /tmp
    Output:
    Filesystem     1k-blocks     used     Available     Use%     Mounted on
    /dev/sda1     30470144     7826952     21070432     28%     /
    As you see above, the free space is enough, but could not determine mount point for /tmp.
    Do any folk understand how to determine the mount point for directory /tmp ?
    Thanks.

    I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
    My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
    I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

  • How to determine the maximum allowable length of a filename for Window ?

    Hi all,
    Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
    Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
    I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
    However, while i try to extract some files from the zip file i just created, i encountered the error
    java.util.zip.ZipException The filename is too long.
    I am using the class ZipFile to extract the files from the zip file like the following
    String absPath = "A very long filepath which exceed 260";
    ZipFile zipF = new ZipFile(absPath);  //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
    Thanks

    Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

  • How to determine the proper size for Oracle 8i Data Base Objects

    Hi,
    I'm working on an Oracle 8i Data base. I'd like to know how to determine the proper size for the Data Base objects such as tables, datafiles, tablespaces...
    Thanks.

    Start with the docs.
    http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/schema.htm#949
    Best Regards
    Krystian Zieja / mob

  • Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

    Dear Experts,
    Can you please suggest me list of activities require to automatically  create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
    i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
    Ram

    Hi Raghu,
    Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
    In SAP ECC system:-
    Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
    Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
      2.  In SAP GTS system:-
    Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
    Ensure that the Number range is maintained for those GTS  Business Partners.
    Also, some time you may be required to maintain the organisational structure to ensure full working.
    I hope this will be helpful to you.
    Regards,
    Aman

  • Availability of the SAP Discovery System for Enterprise SOA

    Hello Everybody,
    will the SAP Discovery System for Enterprise SOA only be avaliable as a appliance as I've read on NetWeaver04s on Discovery System? Will there be a normal installation like a IDES System?
    Perhaps a good idea for a quick start would be a peinstalled Linux Based VMWare Image :-).
    Regards
    Gregor

    Hi Gregor,
    among the reasons for shipping the Discovery System as an appliance are legal reasons. So as long as there are 3rd party components involved (from SAP perspective) you'd need to be an official distributor for them. Obviously this restriction applies to VMWare Images as well.
    An IDES-like installation is facing the challenge of integrating multiple components (that normally have to be installed separately) and their configuration data during the set-up already. This can be done as the example of Rapid Installer shows. But it is certainly more work to accomplish it.
    As always: Making a complex system easy to use/set-up requires extended efforts behind the scenes. So it is always necessary to find the trade-off between "time to market" and "plug-and-play". So currently the availability as appliance is a compromise of both.
    Best Regards,
       rAimund

  • Tablespace allocation type system  how oracle determines the extent size

    HI
    It may be silly question but the I have to ask and get some knowdge
    Suppose tablespace allocation_type is system then how oracle determins the inital extent and max extent size?

    Was this tablespace converted to locally managed from an existing tablespace? If so, the existing extents still exist after the conversion. Also depending on the Oracle version and maybe platform the pct_increase parameter is still honored after the conversion which can lead to odd sizes. The current value of this parameter may not be the value that was in effect when extents were allocated.
    Also Oracle enhanced the logic to not leave odd sized extents unused so that if by rights the system should take a 64K extent but there is a 56K extent available (perhaps at the end of a file) it can be used to fill the extent request.
    HTH -- Mark D Powell --

  • How to customize the program for maximum performance on my system?

    How to customize the program for maximum performance on my system?
    My system: i7-5820k processor, motherboard msi x99s gaming7, DDR4 RAM 8GB ,videocard MSI 970/

    What program?
    Mylenium

  • Insufficient rights - How to determine the correct rights?

    All,
    Does anyone know how to determine the correct rights if you get the error message "Insufficient rights for operation"?
    In SAP backend systems you can start transaction SU53 to check your "missing" authorizations, but is something like that also possible in MDM?
    I also don't see any detailed information in the logs or reports.
    If anyone has an good suggestion, please let me know, since I don't want to do "trail and error" to know what Functions to set to Execute and what Tables/Fields to set to Read/Write (because there are quite some combinations to check).
    p.s. I've read the complete reference guide of the MDM console and sometimes it's really obvious what Functions and Tables/Fields you have to set, but for instance when I want to give authorization to maintain Relationships in the DataManager and have set the Main table and all Relationships to Read/Write and have set all Records and DataManager functions to Execute it still doesn't allow me to maintain the relationships on the records! I only get the message "insufficient rights" and it's unclear what rights are missing!
    Regards,
    Marcel

    hi Marcel,
    I doubt if we have anything in MDM to show you what authorizations are missing.However,you can check the following :
    1. What activity are you trying to perform when you get this error.
    2. Check if authorization are given in the role for that actitvity.
    3. Check how many roles are allocated to user and  Is authorization given in all roles if more than 1 role is assigned to that user?
    Please let us know answer of the queries...
    Regards,
    Vineet

  • E613 SYST: You cannot determine the period for rule 03

    Dear All,
    We are configuring asset module and using MSTL dep key for Tax books. When we tried to create an asset with MSTL dep key, we encountered error - 'E613 SYST: You cannot determine the period for rule 03'. when verified config OAVH Define Calender Assignments transaction,  Period control '03' is missing for fiscal year variant K4. Period control is exisiting  in Maintain Period Control and but not in Define Calender Assignment. What I understand these period controls are being delivered by SAP. Not sure why period control '03' is missing.  all other period control keys are available.
    question is how to add period control 03 so that we can use MSTL dep key. we are currently using 4.7c. Any suggestions would be appreciated.
    thanks
    Sunil

    message went abruptly before I finish.
    +++++++++
    continuing from previous email
    Period control 01 has following entry in the transaction
    Fiscal Year Variant        Per control          Name of the period control             Year      Month      Day      Period        Mid Month
    K4                                      01                        Pro rata at period start date        blank       0            0             blank        not selected
    If I follow SAP help to define period control '03', then I just need to copy period control '01' which is listed above and select 'Mid Month' check box.
    Wondering anyone did this in the past. MSTL depreciation key is being used in MACRS tax for US. I am sure people who  have implemented assets module for US with tax dep, they might have encountered this issue.
    thanks
    Sunil

  • How to install the SAP Java Connector

    Hi,
    I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
    ===
    u2022 Copy the librfccm library and the libsapjcorfc library to busines
    sobjects_root/enterprise120/PLATFORM_PATH, where busines
    sobjects_root is the full path to your businessobjects directory,
    and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
    is solaris_sparc for an installation on Solaris.
    u2022 Use symbolic links for the location of the librfccm library and the lib
    sapjcorfc library.
    u2022 Add the location of the librfccm library and the libsapjcorfc library
    to the library path.
    ===
    Do I have to do all 3 steps or is the 1st one (copying of files) enough?
    On the other hand, the SAP Java Connector guide says:
    ===
    Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
    Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
    ===
    So, what to do?
    Thanks!

    Thanks for your help. So i copied the 2 files as mentioned in point 1.
    Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
    I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
    I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
    Thanks again!
    Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

Maybe you are looking for