How to determine the week for credit management?

Is there a transaction that will show the week for which credit is determined. For example, when running RVKRED88, it shows the week the order is processed under.

Hi Rocha,
In Credit management S066 and S067 information structures play a vital role in updating the credit values of a customer. This works in tandem with the update group present in the OVA8 settings in case of automatic credit check.
When an order is created S066 information structure and OEIKW field is updated which increases open order value. when order is delivered S067 information structure and OLIKW field is updated which increases open delivery value and decreses S066-OEIKW
When delivery is billed S067-OFAKW value (Open billing)gets increased and S067-OLIKW gets decreased.
Updation is through the information structures S066 and S067.
In the transaction code OMO1 select the information structure and double click it. You will be faced with parameters pop-up.
In this pop-up you have radio buttons day ,week  and Month. _Based on the value you choose here you will get day or week or month for the Period split: info structure field present just besides horizon field of dynamic credit check in OVA8 Screen_If you choose week it will be till the end of the week and if you choose Month it will be end of the month. it is how system considers.
For example if we have created an order today i.e. 19/08/2011 and the Period split: info structure in the OVA8 has 1month.
System evaluates dynamic credit check as today's date + one month =19/09/2011which is =30th september,2011.
So while evaluating credit for the order, system will consider all the open orders whose  delivery date is on or before 30th september + open deliveries + open bills + A/C receivables.
Edited by: mokirala tilak on Aug 19, 2011 11:00 AM
Edited by: mokirala tilak on Aug 19, 2011 11:23 AM

Similar Messages

  • How to determine the values for Model Parameters in Forecasting

    Hello Gurus,
          On basis we will determine the values  for the Model Parameter values (Alpha, Beta, Gamma, Sigma).
    Thanks,
    Siva.

    Dear Siva,
    the values are dependent from the forecast stratey and forecast model.
    The forecast strategy determines the method or the techniques that are used to create the forecast. You set the forecast strategy in the forecast profile.
    There are some settings that you must make for certain forecast strategies. The table below shows you which settings these are. You make these settings either in the univariate forecast profile or under the Model and Parameters tabs of the Forecast view on the demand planning desktop.
    Model initialization is the process by which the system determines the necessary model parameters for the chosen forecast model. These parameters are in following link:
    http://help.sap.com/saphelp_scm50/helpdata/en/ac/216b74337b11d398290000e8a49608/frameset.htm
    I hope this helps you further.
    Regards,
    Tibor

  • How to disable the link for Credit -check at item level

    Hi Experts,
    I have an issue tht we want to make a block to the link available for
    credit-release at item level. In the view of the item, when we select the item
    in edit view we have a button saying MORE and in tht we have CHEC CREDIT RELEASE.
    We want to disable this.
    I found tht if we made some changes in do_prepare method, we can solve this issue.,but i was
    check fi anyother way we can do it.
    Awaiting for the replies.
    Thanks,
    SA

    Hey Saurabh,
    If you dont want the functionality occurred due to that button, just simply comment the event handler code for that particular button. That will definitely help.
    Let me know if that work.
    Regards,
    Shobhit

  • How to determine the version of Identity  Manager 9.1 with the build number

    Friends,
    I have a query this compilation of Identity Manager that show below that corresponds Identity Manager version: 9.1.0.1, 9.1.0.2 or 9.1.0.3
    As I can determine this information.
    Diagnostic Dashboard
    System Information:
    Application Server: JBoss
    Oracle Identity Manager Installation:
    Product Version: *9.1.0.1860.16*
    Build Number: 1860.16
    Host: serveroimoooo53
    Location: C: / IOM / xellerate
    Thanks

    That is version 9.1.0.1 base installation.
    You can find the information by logging into metalink (http://metalink.oracle.com) and searching. I used the Build Number to return results.
    -Kevin

  • How to determine the SAPS for Systems

    HI, I have the cuestion concerning to value SAPS
    I need to know the value = 600 SAPS
    value memory = ???
    value CPU   =  ????

    Hi Eli Daniel Ramones,
    You should do the sizing of the sap system that you want to install, depending of the paramteres yoy obtain a several SAP units, that will be converter for your hardware vendor as a specified machine, that you need.
    https://service.sap.com/sizing
    good luck

  • BP for Credit Manager - Launchpad Configuration

    Dear Experts,
    We have installed the Business Package for Credit Manager 1.4 on our SAP NetWeaver Portal and everything seems to be running smoothly.
    We would like to change some long text in the report launchpad, but we don't know how to. Normally I can configure the launchpad texts and queries in transaction SPRO on the source system, but an entry for Credit Manager does not exist.
    How can we configure the launchpad for Credit Manager?
    Thanks in advance.
    Andrew

    Hi Experts,
    If you know the answer to this question please help!
    Regards,
    Andrew

  • How to determine the mount point for directory /tmp ?

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
    "Free Space: Rac2: /tmp"
    Cause: Could not determine mount point for location specified.
    Action: Ensure location specified is available.
    Expected value: n/a
    Actual value: n/a
    I have checked the free space using the command:
    [root@Rac2 /]# df -k /tmp
    Output:
    Filesystem     1k-blocks     used     Available     Use%     Mounted on
    /dev/sda1     30470144     7826952     21070432     28%     /
    As you see above, the free space is enough, but could not determine mount point for /tmp.
    Do any folk understand how to determine the mount point for directory /tmp ?
    Thanks.

    I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
    My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
    I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

  • How to determine the maximum allowable length of a filename for Window ?

    Hi all,
    Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
    Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
    I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
    However, while i try to extract some files from the zip file i just created, i encountered the error
    java.util.zip.ZipException The filename is too long.
    I am using the class ZipFile to extract the files from the zip file like the following
    String absPath = "A very long filepath which exceed 260";
    ZipFile zipF = new ZipFile(absPath);  //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
    Thanks

    Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

  • How to determine the proper size for Oracle 8i Data Base Objects

    Hi,
    I'm working on an Oracle 8i Data base. I'd like to know how to determine the proper size for the Data Base objects such as tables, datafiles, tablespaces...
    Thanks.

    Start with the docs.
    http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/schema.htm#949
    Best Regards
    Krystian Zieja / mob

  • How to Determine the Oracle Identity Manager Server Version?

    Friends,
    I have two questions about the Identity Manager...?
    How to Determine the OIM 11g Server Version?
    How to Determine the OIM 9 Server Version?
    Thanks

    The bundle patches are found by build number. If you go to metalink and check the bundle patches, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. This is written to the XSD table during patching. Once installed, there is no identifier that says "BPXXX applied".
    -Kevin

  • How can I change the start day of the week for weekly view?

    How can I change the start day of the week for weekly view?
    <P>
    This function is configured in the code in file <loadpoint>/CalendarServer/cal/uicust/en/main.html:
    <P>
    i18n['def first day'] = '1';
    <P>
    Note: 0 is Sunday, 1 is Monday, etc.

    Click system perferences below ur screen then click language&text and you just select ur peference langauge

  • IPCC 7 Determine the week number of a month

    Hello,
    I am working towards determine the week number of month and make appropriate routing changes only for that specific week. I have tried using the trunc(), getdate() and weekday(). But i fail to get the week number of a month, but I believe I have managed to the week number of a year.
    The example I have considered is: On Tuesday and Thursdays in second week of every month the calls to be routed to a different skillgroup.
    Please let me know if anyone has any suggestion for this.
    Thanks,
    FYI,
    CM 4.1, CRS 3.5, ICM 7.1

    Hi buddy,
    Great stuff!! Your link gave me another hint of the possible solution, I was working on ICM but not sure why i did not consider CRS for this requirement , The CRS has a builtin function, I have used this builtin Methods which provided me what i expected.
    The debug on the script resulted the week of the month for today which is "4".
    Please let me know your view.
    Thanks again!

  • How to determine the u2018equivalent position of the same organizationu2019?

    Hi,
    "Position change is a transfer from one position to an equivalent position within the same org reporting structure and under the same chief position"
    How to determine the u2018equivalent position of the same organizationu2019?
    Cheers.

    u can identity the position with help of the Holder
    say for ex: A is the holder of the Position for Executive now the user performent an event called change of position so he changed to Manager (here we can find the chageing on the basis of some parameter so i have taken holder as Parameter as we dont know which has changed or wht has changed)
    in this case we can use the report   RHDESC20  se38
    not an exact solution for ur question
    will try to find some other way

  • How to determine the Current Domain name from inside an Mbean / Java Prog

    We have registered an Application Defined MBean. The mbean has several APIs. Now we want to determine the currrent domain using some java api inside this Mbean. Similarly we have deployed a Webapp/Service in the Weblogic domain. And inside this app we need to know the current Domain. Is there any java api that will give this runtime information.
    Note: We are the MBean providers not clients who can connect to the WLS (using user/passwd) and get the domain MBean and determine the domain.
    Fusion Applcore

    Not sure if this will address exactly what you are looking to do, but I use this technique all the time to access runtime JMX information from within a Weblogic deployed application without having to pass authentication credentials. You are limited, however, to what you can access via the RuntimeServiceMBean. The example class below shows how to retrieve the domain name and managed server name from within a Weblogic deployed application (System.out calls only included for simplicity in this example):
    package com.yourcompany.jmx;
    import javax.management.MBeanServer;
    import javax.management.ObjectName;
    import javax.naming.InitialContext;
    public class JMXWrapper {
        private static JMXWrapper instance = new JMXWrapper();
        private String domainName;
        private String managedServerName;
        private JMXWrapper() {
        public static JMXWrapper getInstance() {
            return instance;
        public String getDomainName() {
            if (domainName == null) {
                try {
                    MBeanServer server = getMBeanServer();
                    ObjectName domainMBean = (ObjectName) server.getAttribute(getRuntimeService(), "DomainConfiguration");
                    domainName = (String) server.getAttribute(domainMBean, "Name");
                } catch (Exception ex) {
                    System.out.println("Caught Exception: " + ex);
                    ex.printStackTrace();
            return domainName;
        public String getManagedServerName() {
            if (managedServerName == null) {
                try {
                    managedServerName = (String) getMBeanServer().getAttribute(getRuntimeService(), "ServerName");
                } catch (Exception ex) {
                    System.out.println("Caught Exception: " + ex);
                    ex.printStackTrace();
            return managedServerName;
        private MBeanServer getMBeanServer() {
            MBeanServer retval = null;
            InitialContext ctx = null;
            try {
                //fetch the RuntimeServerMBean using the
                //MBeanServer interface
                ctx = new InitialContext();
                retval = (MBeanServer) ctx.lookup("java:comp/env/jmx/runtime");
            } catch (Exception ex) {
                System.out.println("Caught Exception: " + ex);
                ex.printStackTrace();
            } finally {
                if (ctx != null) {
                    try {
                        ctx.close();
                    } catch (Exception dontCare) {
            return retval;
        private ObjectName getRuntimeService() {
            ObjectName retval = null;
            try {
                retval = new ObjectName("com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean");
            } catch (Exception ex) {
                System.out.println("Caught Exception: " + ex);
                ex.printStackTrace();
            return retval;
    }I then created a simply test JSP to call the JMXWrapper singleton and display retrieved values:
    <%@page contentType="text/html" pageEncoding="UTF-8"%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
       "http://www.w3.org/TR/html4/loose.dtd">
    <%@ page import="com.yourcompany.jmx.JMXWrapper"%>
    <%
       JMXWrapper jmx = JMXWrapper.getInstance();
       String domainName = jmx.getDomainName();
       String managedServerName = jmx.getManagedServerName();
    %>
    <html>
        <head>
            <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
            <title>JMX Wrapper Test</title>
        </head>
        <body>
            <h2>Domain Name: <%= domainName %></h2>
            <h2>Managed Server Name: <%= managedServerName %></h2>
        </body>
    </html>

  • Service Interfaces for Credit Management using WS-RM

    Hi,
    We are implementing FSCM Credit Management on EHP 5 without using PI. For this we are WS-RM and have configured following service interfaces:
    CreditCommitmentNotification_In
    CreditCommitmentNotification_Out
    CreditWorthinessQuery_In
    CreditWorthinessQuery_Out
    However, when we create sales order, credit check is not being perfomed. Do we need any other service interface for implementing Credit Management?

    Hello,
    I am using ECC 6 ehp 5 Which Enables you to Implement FSCM services via WS-RM (Web Service Reliable Messaging) instead of having to use Previously PI.
    I require to implement the scenario is:
    Credit Management (FSCM) and Integration with FICA without requiring PI.
    I think I have covered all the technical configuration, but do not know how to test credit management and integration with FI-CA, appreciate if you can do to get a guide.
    As indicated by the WSRM configuration guide, run the report SRT_ADMIN_CHECK and the result is:
    Cross-checking system settings
    bgRFC destination is Operational
    bgRFC destination is registered supervisor
    WSRM event handler is activated
    Task is active watcher
    Data collector for monitoring is not activated
    ICF All nodes are active for SOAP Runtime
    Ending cross-check of system settings
    thank you for your help.
    Regards.

Maybe you are looking for

  • How to print hard-coded data in multiple language in sapscript.

    Hi All, How to print hard-coded data in multiple language in sap-script, here the requirement is when printing the output we can see the window heading, description which are mostly hard-coded here I want to print these in both language as fallows, G

  • Manual addition of line item allowed in Outbound delivery

    Dear Experts,          In the "Outbound delivery" document created with reference to "sales Order" if we tried to add one more line item manually then, system is accepting that line item without any warning / error message.             but as per our

  • Displaying frames in premiere pro 2.5

    The frmaes of clips in timeline son't seem to be whole frames. I have set the view frame setting to 1 frame but this does not work and is a problem when deleting frames. I have selected pal etc so what am i doing wrong? Thanks jane

  • Excise calcultaions in MIGO

    Dear Seniors, I have mantained all selections in J1ID..still while doing MIGO, it is telling BED, AED and SED for the excise item is zero Please check excise base for the item is zero ! where i am missing. kindly tell me please. Regards, JanaMM

  • File shareing is not working WHY

    I have an Imac running 10.7 and a g5 running 10.5.8 the G5 we are usung as an in house server. It working fine for 5 months then our internet went down and now it no longer works. This is how I have it set up. on the g5 I have file shareing turned on