How to disable an I/O field at runtime of the screen

Hi Guru's,
Here's the scenario..I have to diable one I/O field in the screen at runtime. If I will click one radio button, one I/O field should be disalbed. How can I do that? Please help!! I'm doing a report program, do someone have an idea how to make this work?
Any help will be appriciated
Thanks and regards,
Mackoy

Hi Morris,
Still got no answer..here's my code below..
selection-screen begin of block scr01 with frame title text-001.
*& select options
select-options: ps_matnr for mara-matnr,            "Article
                      ps_date for mkpf-budat obligatory. "Date
selection-screen end of block scr01.
selection-screen begin of block scr02 with frame title text-002 no intervals.
parameters: Site radiobutton group rb1,
                   Article radiobutton group rb1.
selection-screen end of block scr02.
*& Events
at selection-screen on radiobutton group rb1.
if article = 'X'.
     loop at screen.
       if screen-name = 'PS_MATNR-LOW' and screen-name = 'PS_MATNR-HIGH'.
          SCREEN-INPUT = 0.
          screen-invisible = 0.
         MODIFY SCREEN.
       ENDIf.
     ENDLOOP.
     perform display_site.
endif.
thanks and regards,
Mackoy

Similar Messages

How can I unlock my iphone??? on the screen I only have the apple logo and a thing that looks like if the phone is working but no advance

how can I unlock my iphone??? on the screen I only have the apple logo and a thing that looks like if the phone is working but no advance

Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Hi All, my iPhone 3GS is showing rotate lock : how can I reset back to be able to see the screen/website in landscape position. Thank you.

hi All, my iPhone 3GS is showing rotate lock : how can I reset back to be able to see the screen/website in landscape position. Thank you.

Double tap the home button to bring up the multi-tasking bar, swipe left to right, far left is the orientation lock button, tap on/off. Tap home button when finished.

How do I get my whole picture to show on the screen where I can see the entire image?

How do I get my whole picture to show on the screen where I can see the whole image?

Hi & welcome to the forum.
We need more details to be able to help you. Can you please explain your situation in a bit more detail?
Also, please let us know what version of Photoshop you have and what OS you're running.
-ST

Hello, I have a question for you. receipt of some Internet providers or notices notifications on the lock screen and I consume the battery on my iPhone 4S. would you please tell me how do I block these ads in blue letters on the screen me? thanks

hello, I have a question for you. receipt of some Internet providers or notices notifications on the lock screen and I consume the battery on my iPhone 4S. would you please tell me how do I block these ads in blue letters on the screen me? thanks

Hi demir67,
Welcome to the Support Communities!
The articles below will show you how to block text messages from your iPhone:
iPhone User Guide for iOS 7:
Send and receive messages - iPhone
http://help.apple.com/iphone/7/#/iph01ac18d71
Block unwanted messages. On a contact card, tap Block this Caller. You can see someone’s contact card while viewing a message by tapping Contact, then tap the "i" with the cirle. You can also block callers in Settings > Phone > Blocked. You will not receive voice calls, FaceTime calls, or text messages from blocked callers.
iOS 7: Understanding call and message blocking
http://support.apple.com/kb/HT5845
Notification Center - iPhone
http://help.apple.com/iphone/7/#/iph6534c01bc
Set notification options. Go to Settings > Notification Center. Tap an app to set its notification options. You can also tap Edit to arrange the order of app notifications.
Cheers,
Judy

Disable / enable table control field at runtime

hi ,
i am working on a custom transaction in which i have a table control...depending on a table value i have to disable an input field inside the table control...
i know in a normal field we use
loop at screen.
if screen- name = 'XXX' or screen-group = 'XXX'
screen-output = 0.
endif.
but inside a table control field how to modify it.
Regards
Harish Ramakrishnan

All you need to do is put some code in a module of your PBO.     This will change the cell attribute of a single row.
PROCESS BEFORE OUTPUT.
* PBO FLOW LOGIC FOR TABLECONTROL 'I_INTRCON'
* MODULE I_INTRCON_CHANGE_TC_ATTR.
* MODULE I_INTRCON_CHANGE_COL_ATTR.
LOOP AT   I_INTR
       WITH CONTROL I_INTRCON
       CURSOR I_INTRCON-CURRENT_LINE.
<b>    MODULE I_INTRCON_CHANGE_FIELD_ATTR.</b>
ENDLOOP.
MODULE SET_CURSOR_FIELD.
MODULE STATUS_0200.
module i_intrcon_change_field_attr output.
modify i_intr index i_intrcon-current_line.
if i_intr-check = 'X'.
    loop at screen.
      if screen-name = 'I_INTR-RCVQTY'.
        screen-input = '1'.
      endif.
      modify screen.
    endloop.
endif.
endmodule.
Regards,
RIch Heilman

How do I create a text field that automatically enters the same info on proceeding pages

I know this is a basic question for Acrobat Pro, but I'm a newbie at it. Basically, I work with pdf forms in education and I would like to figure out a way where if I enter for example someone's birthdate in page 1, and it automatically enters it in pages 2, 3, 4 and so on of the same document.
Also, along the same lines, is there an easy way to be able to edit multiple pages of a document at once. Example: A lot of the people at my office that use the copy and paste feature in the pdf documents, and often overlook changing the "he" to a "she" and "his" to a "her" and as a result we end up with filled forms that use the incorrect sex.
I apologize in advance if I'm not being very clear, but is the best way I can describe my problem.
Thanks

1. You can duplicate the field. Right-click it using the Select Object Tool and select Duplicate. You can then select the page range.
Otherwise, you can copy&paste it, or create a new field and give it the same name as the original.
2. No.

How to disable menu bar and dock when playing a full screen game? Like sims 4

i play sims 4 on my MacBook pro and if I go to close to the bottom of the screen or the top the menu bar or dock pops up I was wondering if there is A program or a setting I can use to disable that while in something full screen or gaming

The game itself should already have the option for full screen. But you can go to system preferences dock and check the hid dock option. Then you would have to go to the very edge of the screen to get the dock to reappear.

How to skip the mandatory field validation for clearing the screen fields

Hi Friends,
I have created a module pool screen, and made some fields mandatory. after entering some fields, if i try to clear the fields, am unable to clear. Its throwing the error "Enter all required fields"., since some mandatory fields are there. But i could able to navigate through other screen. Both the "CLEAR" and "NEXT" command are given in the at-exit command only. Next is working but clear is not working.
Please provide me the solution.
Thanks
Karthikeyan.L

Hi,
To avoid automatic input checks you have to assing function type - E to appropriate screen field, which is not to be checked.
These function codes don't trigger PAI processing, instead they go directly to
MODULE mod AT EXIT-COMMAND.
..placed in PAI of the screen. In this way you can ommit automatic checks performed by system on mandatory fields. Please ensure you have assing E type to next and clear functions in GUI status.
Regards
Marcin

How do you change what your mouse looks like on the screen?

I would like to change how my mouse icon looks and how the it looks when something is loading. How do I do that?

You can only change the size of the cursor, not the cursor itself. Apple has determined that the mouse cursor is the way it is supposed to be and the user should not change it.
To change cursor size, go to Sys. Preferences, accessibility, there's a slider for cursor size

How much does an 2nd generation ipod cost to fix the screen?

How much does an 2nd generation 8gbs ipod cost to fix the screen?

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself
iPod Touch Repair – iFixit

How can i get rid of a black speck behind the screen?

Brand new, quad 2.8 GHZ Intel iMac. Beautiful. But has a black speck in the screen. How on earth would i get rid of this? I'm quite positive it's not on the screen. i've wiped it very firmly w/ the cloth provided. the thing is simply on the other side. Ideas?

Hi Peter,
If you can take it back to the Apple store (assuming you bought it from one). I had similar with a 24" iMac last year and they just replaced it there and then no questions, no arguing. They even transferred all my Data to the new machine. It was hassle free and I walked out of the store with a brand new replacement iMac set up like my original machine.
Don't try doing anything to it yourself if it is brand new, it will void your warranty.
Paul

How can open a tax return on sarsefiling every try the screen is blank

How can I open a tax return on sarsefiling ,every time I try the Screen is blank.

Whatever version of Pages that you have, you haven't said, have you updated it to the latest version?
Peter

How to populate a set of fields multiple time in the page ?

Hi All,
JDev Ver : 11.1.1.5
I have a requirement as follows,
My page contains 1. Add Button
2. Five fields.(one input text and four select one choice)
The fields are like one input text and remaining select one choice. And also these fields contains validations.
Actions
On click of add button , I have to show the fields , similarly I have to add one more set of fields in the page below the first set when I click the add button, Like this I will add as many as I need.
How to achieve this requirement,
1. Do I need to generate the view objects dynamically from managed bean ?
2. Do I need to create a custom component ?
For Time being , I have added 3 set of fields pages and showing one by one. I want to do this dynamically.
Please let me know the suggestion for this Requirement.
Thanks,
Gopinath

Hi,
to do this:
1. reate a managed bean that exposes a HashMap property. The HashMap is of type e.g. Map<Person>
2. To create a new set of fields, add a new entry to the HashMap and refresh the af:form. The af:form contains and af:forEach that you use
to iterate as often as you have entries in the HashMap. Each text field you bind to #{bean.HashMapProperty['key'].attribute}, for example
#{bean.HashMapProperty['key'].FirstName}
#{bean.HashMapProperty['key'].LastName}
#{bean.HashMapProperty['key'].EmployeeId}
3. When the user updates a field, the HashMap is updated based on the "key"
4. The managed bean should be in viewScope and referenced from the field's value property
Frank

How to change crystal report data field at runtime ?

Hello everyone,
I have a Crystal Report file ,which i am using to generate report for my windows form project .
In that report i have a filed called as Quantity which data type is set as decimal, the requirement is like that the number of value those comes after decimal point that should be set according to the value which is given by the user at the run time .
For eg: If user gives 1 at the run time then the report Qty field value set one value after decimal point. Like 12.1
if user gives 2 then Qty field the value is 12.22 like tat but user can give from zero to any number.. and if it is zero it should not show decimal
Note: The main idea hear is how to change the filed in Crystal Report decimal point value by using code(or we say writing code we need to set manually as user input it will change)
Can any body help me how to solve this issue .
S.K Nayak

I think you could probably make the field you see a formula field and take a parameter as the number of decimal places.
totext converts a number to a string.
totext({decimalField}, 2)
That's 2 decimal places.
You could probably substitute a {parameter} for that 2.
If not then you could substitute an entire formula.
To explore formulas:
foreach (FormulaFieldDefinition f in rpt.DataDefinition.FormulaFields)
MessageBox.Show(f.Name);
// f.Text = your new formula
Where rpt is an instantiated report.
Or add another string field which you display in the column and do the calculation with the original decimal.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

How to disable an I/O field at runtime of the screen

Similar Messages

Maybe you are looking for