How to disable IPv6 for loopback adapter (lo0)

I was wondering if anyone knows how to disable IPv6 for the loopback (lo0) adpater. I know how to do it for other adapters using the Network preferences pane, but lo0 doesn't appear there...
Thanks,
- alan

I need to temporary disable ipv6 address of lo0 (which by the way is not 127.0.0.1 but ::1) for testing development purpose..

Similar Messages

  • How to disable IPV6 on localhost

    Someone known how to disable ipv6 on the lo0 interface ?

    I need to temporary disable ipv6 address of lo0 (which by the way is not 127.0.0.1 but ::1) for testing development purpose..

  • How to disable iMessage for a single contact?

    Hello apple communites, I have a simple and hopefully simple to answer question..
    I am curious as to how to disable iMessaging for a single contact.  My sister when she got her phone number originally had an iPhone, she has since gotten an android and kept the same phone number.  However I am running into issues with text messages to her, my phone still thinks she has an iPhone and continues to send every text as an iMessage, resulting in a failed message.  I can easily hit the "send again as a text message" option and the message/picture sends as normal.  I however find this a bit fustrating, and have tried everything I can think of to attempt to disable this.  However all the online tutorials I can find regarding disabling iMessage turns the feature off completly, I don't wish to do that. 
    I have attempted to completely delete, (including all existing all texts and call history), and then re-add the contact, but that does not work either, my iPhone still attempts to send messages to my sister as an iMessge. Any help, if any, would be appreciated. Thanks in advance.

    Your sister needs to disable iMessage on her iPhone if the iPhone is still available if she hasn't already done so.
    If she has, does she have iMessage enabled with the same Apple ID on another iOS device or on a Mac as was used to activate iMessage on her iPhone?

  • How to disable click for open a app mobile? i have picture.

    how to disable click for open a app mobile?
    How i do?
    why adobe captivate need to click for open app.
    i need to open auto.
    thank you

    Swiping down from the midle of the screen will open the search window on its upper section.

  • How to disable debugger for sapscript forms.

    How to disable debugger for sapscript forms.
    Once activated in se71-Utilities-Activate debugger I do not know how to disable it

    Thank you Rich
    I assigned you points for good answer on my preavious mail)
    . Actually my real problem is a transported the SAP script form “znalepke2” , printer definition ”nale”
    and device type “zststartsp” of a thermal printer.
    On original system (ak1) the printout is ok but on target system(ak2)
    not.
    Lateron I transported also :
    R3TR SCPD 1403(as the device type uses this character set)
    R3TR TABU TSP08 (All entries)
    R3TR TABU TSP1D(All entries)
    R3TR TABU TSP1T(All entries)
    I used also report  RSTXSCRP to traport form and device types. L
    Lately I discovered that when I performe printout preview I get also eronneous printout If I ssue an printout preview in language "EN" on system "ak1"(only on system ak1 and form preview in "SL" is oK. What steps you suggest me to solve the prolem
    Thank you in advance

  • How to disable cache for a particular Report in obiee 10g?

    HI
    My name is Rani .Learning obiee10g ifaced 1 interview in that they asked me like how u disable cache for a particular report?

    In the advanced tab of the report, under prefix you need to mention:
    SET VARIABLE DISABLE_CACHE_HIT=1;
    Refer below link
    http://tipsonobiee.blogspot.com/2009/06/step-by-step-to-bypass-all-caches.html
    Thanks

  • How to disable iMessage for certain contacts

    I was wondering how to disable iMessage for certain contacts!

    Try deleting the phone number from the persons contact and then re-entering it as a new number.
    You don't have to delete the entire contact.
    Worked for me.

  • How to disable iMessage for an old Apple ID which is only used for AppStore?

    How to disable iMessage for an old Apple ID which is only used for AppStore?
    I used my old Apple ID for iMessage and AppStore Apps. Now I'm using my iCloud Account (second Apple ID) on my Mac as iCloud and iMessage Account.
    New Apple ID - iCloud & iMessage (**** thing that I can't use my okd Apple ID for iMessage and another for iCloud) on new Mac
    Old Apple ID - AppStore, iMessage days ago
    So now how to disable the iMessage function for my old Apple ID which isn't used anymore?
    Thank you!

    Yeah the problem is that I want to be reachable by:
    *new apple id
    *mobile number
    Earlier:
    *old apple id
    *mobile number
    Problem - if I set in Settings => Messages => Receive at:
    *new apple id
    *mobile number
    Others still can see my old apple id as "iMessage" although it isn't used a iMessage anymore. So how to disbale iMessage function for that?

  • Grid Control how to disable alert for Tablespace UNDO is 99 percent  full

    I am new to Grid control and want to know how to disable alert for UNDO tablespace full.
    Target Name=xxxx
    Target type=Database Instance
    Host=xxx
    Occurred At=Dec 24, 2010 1:21:00 AM EST
    Message=Tablespace UNDOTBS1 is 99 percent full
    Metric=Tablespace Space Used (%)
    Metric value=99
    Tablespace Name=UNDOTBS1
    Severity=Critical
    Acknowledged=No
    Notification Rule Name=Database E-Mail Notifications
    Notification Rule Owner=SYSMAN

    You should post in the grid control foruma.
    But just go to databases, select your database, metric and policy settings, find the tablespace metric, edit and exclude the undo tablespace.

  • How to disable ipv6 address autoconfiguration ???

    I am trying to disable ipv6 stateless address autoconfiguration to implement what this document describes:
    http://docs.sun.com/app/docs/doc/816-4554/6maoq01o3?a=view
    There are several problems though:
    1)The manual says that something must be put inside the hostname6.xxx file but then goes on to give the command as it should be given from the command line instead of the content of the file. The manual should provide some form of exapmle content for the file.
    2)I go to /etc/inet/ndpd.conf and put "ifdefault StatelessAddrConf false" inside, then I pkill -HUP in.ndpd and finally I issue ifconfig eri0 inet6 token fe80::c/10. However nothing happens. The interface address remains the one generated through autoconfiguration.
    Could someone that has knowledge of this subject provide any help?
    Thanks very much,
    Thanasis

    Hi,
    I have a same problem, and think we didn't understand the documentation.
    Here is the link of the ndpd.conf configuration page:
    http://docs.sun.com/app/docs/doc/816-4554/6maoq01qt?a=view#ipv6-ref-10
    I think this is the right sintax:
    if
    Sets per-interface parameters. Use the following syntax:
    if interface [variable-value]
    Table 11�3 /etc/inet/ndpd.conf Interface Configuration Variables
    StatelessAddrConf
    True
    Controls whether the node configures its IPv6 address through stateless address autoconfiguration. If False is declared in ndpd.conf, then the address must be manually configured. For more information, refer to How to Configure a User-Specified IPv6 Token.
    I think the variable is this: StatelessAddrConf
    if-variable-name StatelessAddrConf false
    I think: if StatelessAddrConf false
    But I found the 'false' parameter with uppercase and lowercase letter.
    (It is not working for me!)
    And I found another configuration file, what is include the rules of the address (/usr/sbin/ipaddrsel ).
    Here is the link:
    http://docs.sun.com/app/docs/doc/816-5166/6mbb1kq56?a=view
    Maybe, I found the solution.
    http://docs.sun.com/app/docs/doc/816-4554/6maoq01qt?a=view#ipv6-ref-10
    You can creat a logical interface, and you can set the IP address of this interface.
    Example 11�6 Adding a Logical IPv6 Interface With the -addif Option of the ifconfig Command
    The following form of the ifconfig command creates the hme0:3 logical interface:
    // this is teh example, and it is not perfect on Sol10
    # ifconfig hme0 inet6 addif up
    Created new logical interface hme0:3
    This form of ifconfig verifies the creation of the new interface:
    # ifconfig hme0:3 inet6
    hme0:3: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
              inet6 inet6 fe80::203:baff:fe11:b321/10
    Here is my solution:
    ifconfig e1000g0 inet6 addif 1234:0000:0000:0000:0200:50FF:FE09:B980/10
    ifconfig e1000g0:1 inet6 up
    # ifconfig -a6
    lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
    inet6 ::1/128
    e1000g0: flags=2000840<RUNNING,MULTICAST,IPv6> mtu 1500 index 2
    inet6 fe80::20d:60ff:feee:aba8/10
    ether 0:d:60:ee:ab:a8
    e1000g0:1: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
    inet6 1234::200:50ff:fe09:b980/10
    I have special IP address, but I don't know that it is working or not.
    If you have any idea, please write!
    Br,
    Sanyi

  • EA3500 Smart Wi Fi - How to disable IPV6 to address Parental Control Issue

    Hi
    I've been reading that parental controls does not work with IPV6.
    I would like to disable IPV6.
    How would I do that?
    P.S.: I noticed responses for EA4500 that there is a check box to disable the IPV6.  Very straight forward but my interface
    does not have the same layout of the GUI.  
    Thanks

    Hi petroski1,  the process of disabling IPv6 in your router depends if you’re using the Classic user interface or the Linksys Smart Wi-Fi. You may refer to this link, for instructions: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=bd520bcb07a6474596169...
    If you’re using the Classic one, select IPv6 under the Setup tab and just disable it. And if you’re also using the Linksys Smart WI-Fi, go to Connectivity, select Internet settings, click on IPv6 click edit and make sure to uncheck the enable box.

  • How to disable MOH for "on Hold" button.

    CUCM 6.1
    When on a conference call if a user presses "on Hold" button, music is played for all participants and nobody can hear anything. How can I disable music on hold for all users?
    Please note, I could disable MOH for conferencing. But this is different issue. This is e.g. when everyone is in a conference (no matter what conference system, it could be ready talk, meeting place,...)and a participant receives another call and wants to answer the other call, in this situation I don't want any MOH played for other participants.
    Thanks,
    rdianat

    I first tried "suppress MOH for conference" by service--> service parameters -->select server --> select callmanager --> go to "clusterwide parameters(Feature-General) --> change the "Suppress MOH to conference Bridge" to true"
    This did not work. The reason is that these users are accessing an internet coferencing system like "ready talk" and not a cisco conferencing system, so for Cisco this does not appear to be a conference but it is like a regular call.
    I only have two callmanagers which also serve as MOH servers.
    Media Resources-->Music On-Hold Server -->Set Run Flag to "NO"
    This is explained in "MOH FAQ" from cisco.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a0080094766.shtml#q21
    The other way of doing this is not to assign any MOH server to the MRG or create a device pool without any MOH. (Media Resource Group set to NONE)
    Although the above disabled the MOH, still the TOH "Tone on Hold" which is beep-beeps played every 10 seconds was annoying. So I increased the interval to 20 seconds by the same instructions in "MOH FAQ" how to disable / change TOH. Go to same page explained above but to "clusterwide Parameters(Device-General) and change "Tone on Hold Timer" Value to 20.
    rdianat

  • How to disable iMessage for a specific contact/How to unregister iMessage from former device

    I switched from an iPhone 4 to a Galaxy S3. When my wife who still has an iPhone 4 tries to text me it still sends the message as an iMessage and I NEVER receive the text on my Galaxy S3. It still shows the little blue bubble next to my name when starting a new text thread. So I checked with about 4 other iPhone users that text me on a regular basis and I'm not receiving any of their messages either.
    If the iPhone users turn off iMessage the text comes right through. However I dont expect all the iPhone users on my contact list to turn off the iMessage feature just so they can text me.
    I no longer have my old iPhone. I traded it in at Best Buy so there's no way of going back in the phone to change any settings. The iPhone was wiped of all data and settings anyway before I traded it in.
    I took my wifes iPhone and deleted my contact. Then I added it back. Still shows my name as iMessage. I took my e-mail address out of my contact entry on her phone and it still shows my name as iMessage.
    I logged into "Apple Support - My Support Profile" to try to unregister my device as suggested in another forum but I can't get past the "enter your purchase date" page. It was a refurbished iPhone and the date I purchased the device didn't work. Theres no way I'll ever get the original purchase date since I wasn't the original buyer of that iPhone.
    Any suggestions?? This is an urgent matter as I NEED to receive text messages from my wife and other iPhone users. My wife is willing to turn off iMessage on her iPhone but I don't expect everyone else to.
    I need to find out how to unreigster my old iPhone completely from iMessage.... or find out how to disable a specific contact on my wife's iPhone from using iMessage.

    If you still have an iPhone handy and have the SIM card you used for the phone, then temporarily put your SIM into the other phone and go into Settings and turn of iMessage. If not, the only alternative that I know of is the Support profile, However, you may what to search the More Like This section on the right side of the thread to see if any of the entries there have a green checkmark meaning they are answered.

  • How to Disable CheckBox for a Particular Condition

    Hi All,
    In my application, iam using one table having 5rows , with checkboxes,
    based on one condition i want to  make few checkboxes as default disable in the same table, and some checkboxes i shud make it as enable, so experts please help me how to disable some checkboxes.
    disable means even if we select it shud not get selected, like that is it possible,

    Hi Sushma,
    You can have one more attribute in the same node from where you are populating the table and bind this boolean attribute to the enabled property of your CheckBox.
    and by looping thriugh the table you can check for conditions and based on it set the Enability of the checkbox.
    for (int iRowsCount =0;iRowsCount < wdContext.node<name>().size();iRowsCount++)
    if (condition)
    // Disabling the Checkbox based on the condition
    wdContext.node<name>().get<name>ElementAt(iRowsCount).set<BooleanAttributeName>(false);
    Hope this helps!!
    Cheers,
    Arafat

  • How to disable password for Diagnositics

    Hi,
    I want to disable the password option while I am doing Diagnostics. It is asking for password everytime when I select
    Navigation Menu -> Help -> Examine -> Diagnostics
    Please let me know how to disable this.
    Thanks in Advance!!
    Madhu Kumar

    Hi,
    To disable password protection, set 'Utilities: Diagnostics' profile option to 'Yes'.
    Note: 160151.1 - How to Make Help Diagnostics Examine be Password Protected?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=160151.1
    Regards,
    Hussein

Maybe you are looking for