How to display a message on status bar while an LOV is active?

Hi,
Can any suggest me that how can I display my custom message on the status bar of my form, while an LOV is displayed on the screen.
I populate an LOV in an Item in the form. I need my status bar to display a message while my LOV is Displayed and also this message to be there on the screen when we moves between the records on the LOV.
This can be partially achieved by 'message' built-in, but the text message so displayed disappears as soon as u move between the records displayed by the LOV.I want this to be retain there even when we move between records(the data displayed in the LOV) in LOV.
Can anyone suggest the solution?
Many thanks in advance.
Cheers
Naresh

hi i am not sure about displaying the information on status bar , what i feel is u can do something like this.
take one display item which shud be non database item and u can assign the message u want to display to this display item when ever u navigate thro' records.
i hope this can solve ur problem
thanks and regards
chaitali

Similar Messages

Display a message in status bar when error in a block based procedure

Hi
I have a block based on procedures.
If I have an exception when I try to insert a record for example, how can I display a user friendly message in the status bar ?
here is my insert procedure :
PROCEDURE emp_insert2(t IN emptab) IS
BEGIN
    FOR i IN t.first..t.last LOOP
    INSERT INTO emp (empno, ename, job, hiredate, sal)
    VALUES(t(i).empno, t(i).ename, t(i).job, t(i).hiredate, t(i).sal);
    END LOOP ;
EXCEPTION
    When DUP_VAL_ON_INDEX then
        Raise_Application_Error( -20002, '^This identifier already exists^' ) ;
END emp_insert2;When I use the ON-FORM trigger and ERROR_CODE and ERROR_TEXT variables, I get an FRM-XXXX message saying :
40735--INSERT-PROCEDURE trigger raised unhandled exception ORA-00001.
I want a message like :
ORA-20002 This identifier already exists

Hello,
ORA-20500: ^This identifier already exists^ ORA-06512: à "SCOTT2.EMP_PKG", ligne 48
I cannot figure out what is the problem described by the second part of the message.
why numeric or value error in this case ? ( ligne 48 corresponds to the raise_applicaion_error instruction )There is no problem with the second part it is just for showing the line number it not the numeric or value error the code for numeric or value error is ORA-06502. See the below link for more information
http://www.techonthenet.com/oracle/errors/ora06512.php
So, now you can display your customized message in status bar using the error code which you defined in RAISE_APPLICATION_ERROR like below...
DECLARE
     errcode VARCHAR2(50) := DBMS_ERROR_CODE;
     errtxt VARCHAR2(1000) := DBMS_ERROR_TEXT;
BEGIN
     IF vErrCode='-20500' THEN
        MESSAGE('Here display your customized message.');
     ELSE
        -- Handle the rest errors...
     END IF;
END; -Ammad

FM to display warning message at status bar

Hi,
can any body give me the FM to display the warning message
at status bar.
Thanks in advance

Hi,
To give a warning message , you dont need any function module. You can use the keyword 'MESSAGE' and give the type as 'W'.
Do a F1 on the keyword MESSAGE for further details.
regards,
Advait

Message in Status Bar while using ALV Objects

Hi All,
If we use ALV in objects (Build in class and methods for ALV),is it possible to display a error message using Message statement in Status bar.
Thanks in advance.

Hi,
Yes, it is possible. You can do it using the ALV Object Model (ALV OO methods) within an event handler method. For example, the event "added_function of cl_salv_events" can be used and you can add code similar to the following code within the event handler method:
CASE e_salv_function.
WHEN 'XYZ'.
MESSAGE w001(00) WITH 'Message text goes here...'.
ENDCASE.
The warning message will either show up as a popup or in the status bar depending on your user settings. Of course, you can also use other message types (e.g. I, E, S) or other message techniques besides the message statement.
Best Regards,
Jamie

SAP GUI 7.20 and Animated Messages in Status Bar

Hello Experts,
Is there a way to disable "animated" display of messages in status bar when Signature Design is active? Currently messages are scrolled from left to right and then fade in. (Please note that this is a different from "Animated Focus" or "Animation" feature and only unique to Signature Design Theme). It would be nice to disable the animation so messages are immediately displayed without disabling Signature Design. I have asked this question in the past and there was basically no way to accomplish this. Is there any hope that this would be included in future patches for SAP GUI 7.20?
Thank you!
Abdul

Daniel,
Have you had any luck with this issue? We recently installed SAP GUI 7.20 patch 2 and are having similar issues. While working in t-code SWDD, "Workflow Builder", I am automatically logged out of SAP and the LOGON pad also closes out and I forced to sign back in. This is happening when I drag and drop an event into a step and enter in information that should normally prompt a warning/error message after hitting the "Enter" key.
Thanks in advance.
Edited by: Michael Kostek on Oct 7, 2010 9:11 AM

How to pass message in Status Bar

How can I pass message in status bar.
I typed bellow line but get some error.
void itemFileOpen_actionPerformed (ActionEvent e) {
statusBar.setText(" need Help ");
Error: (456) method setText(java.lang.String) not found in class oracle.dacf.control.swing.StatusBarControl.
Warning: Deprecated APIs are used. Please recompile with the 'deprecation' option for details.
null

Sergio,
Even though your form is based on the Apps Template form, double-check to ensure it has all of the triggers it should have, like the Form level Key-Commit. The easiest way to make this comparison would be to open your custom form and then open one of the EBS forms like "ARXCUDCI". If your comparison shows no significant differences you might be dealing with a situation when the message is displaying in the Console (status bar) but something else is clearing the console. Check for any Clear_Message calls.
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

How to display messages in status bar

Hello,
Im developing some forms that will be published in EBS 12.1.1
Im using Oracle Forms Builder v 10.12.0.2.
Those forms are based on the Template form.
I have the following problem: Messages are not displayed in the status bar (for example messages about how many records were affected when the user press Save)
Do you know if I need to set up any property or another task that I need to do in order to see the messages ?
Thanks in advance,
Sergio Maestri

Sergio,
Even though your form is based on the Apps Template form, double-check to ensure it has all of the triggers it should have, like the Form level Key-Commit. The easiest way to make this comparison would be to open your custom form and then open one of the EBS forms like "ARXCUDCI". If your comparison shows no significant differences you might be dealing with a situation when the message is displaying in the Console (status bar) but something else is clearing the console. Check for any Clear_Message calls.
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

Supress message in status bar when using Call Transaction

Hi,
I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
Please let me know for more information.
Thanks,
Manoj.

>
kaka79 wrote:
> I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
> But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
> I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table).

ALV Report - Field Overflow message in status Bar

Hi
I am trying to display ALV report , ALV report is displaying fine but on execution of report , an message in status bar is coming as "Field copy Number can not be totalled because of field overflow."
Can anyone tell why such messgae is comming?
Thanks,
Debadatta

Just a wild guess, treat the below as an example.
Eg:
assuming one field in the output is of length 2 type i.
values: 20, 30, 60, 45.
Totalling the values result as 155. but due to the length of the field as 2. We can encounter the overflow message.
Considering the above example, manually total the values of your numerical columns and see if any of the column is execeeding the specified length.
Regards
Eswar
Note: Reward if you find the info useful.

Error Message in Status bar

Hi ,
i am getting an error message in pop-up box ,can we show this same error message in status bar..?
Thanks.

Hi shiva ,
data : dtype type c value 'S'.
MESSAGE E053(z4) DISPLAY LIKE dtype.
my code is like that,but still it shows in popup window.
can you check it once...?
Thanks

Regarding message in status bar

Hai SDN members , i have to display message in status bar , my requirement is like this ,ihave three fields in gui screen 1 is shipment num ,2 is shipment type and 3 is packing ref . and if i give the input in this three fields ,then the shipment number should be displayed in status bar

hi,
u want message after pressing some button or enter?
u need to write this in USER_AOMMAND module of PAI, in when case..
like
when 'SAVE'.
MESSAGE s000(zmsg_fmtr) WITH srn.
here zmsg_fmtr is my message class
and this is my 000 message in that mssage class
Record Saved Successfully with Serial Number &
in place of & my passing parameter (srn) will come on status
reward if usefull...

How to display a message in Selection Screen

Hi,
I am inserting values into a system defined table by using a report.
For this i have created one selection screen by using all the table fields and i am inserting the values which user has given in selection screen by using Insert statement.
Now i want a message in status bar of selection screen when Insert command is success.
Please give me some help on this
Thanks
Venkatrami Reddy B

Hii
This is the Way...
AT SELECTION-SCREEN.
<<FOR VALIDATIONS>>
START-OF-SELECTION.
INSERT <<statement>>.
IF SY-SUBRC EQ 0.
MESSAGE 'Record inserted' type 'S'.
LEAVE LIST-PROCESSING. "Now the message appears in Selection screen

ENDIF.
REWARD IF HELPFUL.

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to display a message on status bar while an LOV is active?

Similar Messages

Maybe you are looking for