How to display Currency Unit beside value in BEx Report?

Hi,
I have 2 separate Amounts in the columns area. Their respective currencies exist as Characteristics in Unit dimension. How do I display the amount along with currency unit beside it?
As of now my Report looks like....
Amount 1              Amount 2
2000                     3000
I would like to display it as......
Amount1           CUR                Amount2          CUR
2000                 EUR                 3000               USD
Thanks,
SD
Edited by: Sebastian D'Souza on Jan 16, 2009 11:40 AM

Hi Sebastian,
Yes it can be possible to get the currency unit along with currency in ur report.
To do this, first of all u need to have the currency unit in ur flat file or else in ur data.
If u have so, here are the steps to do that.
1.Double click ur amount info object under 'currency/unit of measure tab' , in the unit/currency field just give as 0currency.
2.And then activate ur info object.
3.In Transformations u will find another field '0currency', just map it to the amount field.
and then do the process as usally loading data to target, and the execute the report.
u will be able to see currency unit filed also.
hope this helps u.
Thanks,
Sai Chand.

Similar Messages

  • Display Currency symbol with value in ALV Report

    Hi Experts,
    I need to display currency symbol with value in ALV Report like if currency type is dollar then $200.
    Here I am using field catalog type slis_t_fieldcat_alv and suing field merge catalog FM: 'REUSE_ALV_FIELDCATALOG_MERGE'
    I tried like this
        IF <fs_fieldcat>-fieldname = 'STPRS'.
          <fs_fieldcat>-seltext_s = 'Std Cost '.
          <fs_fieldcat>-seltext_m = 'Std Cost'.
          <fs_fieldcat>-seltext_l = 'Std Cost '
           <fs_fieldcat>-tabname = 'MBEW'.
          <fs_fieldcat>-ctabname = 'T001'.
          <fs_fieldcat>-cfieldname ='WAERS'.
          <fs_fieldcat>-datatype = 'CURR'.
        ENDIF.
    Please any one can suggest the solution for this.
    Advance Thanks.
    Regards,
    Bala Achari

    Hİ,
    Check this link.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=24379571
    Take care.
    Çağatay

  • Preventing display of currency unit infoobject values in a report

    Hi,
    For a currency type key figure, there is a currency unit infoobject specified. This has INR (Indian Rupees) as its value in the infocube for all the records. When I display the KF in a report, the value of the associated currency unit also gets displayed with it. Is there any way to not get this display of the associated currency unit other than not having any currency unit values in the infocube?

    Hi Jr,
    Thanks, that works.

  • How to display the max channel value on the report automatially?

    Hi all,
    I have 2 text boxes start and target ready on my report. I need one of my channel minimum value and the other channels max value to dispaly automatically in start and target box respectively.
    How do i go about it?
    Rsh
    Solved!
    Go to Solution.

    Hello Jason,
    There is an easy way to do this, and there is a more involved way to do this. I am hoping the "easy" way will solve your question, so I don't have to think about the solution that involves a little more effort:
    Starting with DIAdem 2010 there is a way to add properties to the legend (see image below) of any axis system. What I did for this example was to simply add the legend for the 2D graph (that's a simple check box in the "Curve and Axis definition" dialog, and then dragged the maximum value of any channel onto the legend. It will automatically add a new column to the legend table and display the maximum (or any other channel property) in the legend. This of course works separately for each axis system on a page.
    Starting with DIAdem 2011 there is a new "Curve Snippet" function that allows to create tables such as the one shown in the image below. Please have a look at the DIAdem 2011 example called "2D Tables as Legend and Legend for Axis System Labeling" to see how this was done, it's a little more effort, but it also adds extra flexibility:
    Do either of these look like a workable solution for you?
    Best regards,
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • How to display texts automatic. besides entered value for a field in Trans.

    How to display texts automatically besides the entered value for a field in a standard transaction screen. For example you have a value table and a text table associated to it. Then on entering the value field and pressing enter the text associated should get displayed immediately besides the value. Like if you have 'LOC' as the value and 'Location' as the text associated to it, on entering this value 'LOC', you automatically get the text 'Location' printed besides it automatically in a transaction screen ?
    Message was edited by: Sarika Kedia

    Hi sarika,
    Welcome to SDN.
    1. first of all, such display of text,
       is not automatic.
       (it appears to be automatic)
    2. At design time,
       a) take one extra field for text
         and mark it as OUTPUT ONLY
    3. Then in PBO coding,
        call some module, and in that module
        write code
    4. The code should be to
       select from TEXT Table
       into the work area.
    EG. THE SCREEN TEXT FIELD NAME IS
    T510A-FIELDNAME.
    CLEAR t510a.
      SELECT SINGLE * FROM t510a INTO t510a
      WHERE trfar = FIELVALUE.
    5. This will take care of
       displaying the text value of that field.
    regards,
    amit m.

  • How to display my input history values on Filename filed (selection screen)

    Hi All,
    Please let me know how to display my input history values under the field of selection screen.
    I created Zprogram as below.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
      PARAMETERS: P_FILE  TYPE RLGRAP-FILENAME OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK B1.
    I displayed a selection screen of my Zprogram, my cursor put on P_FILE field, and enter BACKSPACE key,
    so it doesn't display my input history values.
    Of course I've selected Local Data History 'ON' of my GUI option,
    so it's displayed my input history values on any other fields.
    If you know why, please let me know.
    Regards,
    Rie.

    In the GUI options, there is also a setting for the maximum length of fields for storing the history, maybe it is set to small, as your selection field is length 128.
    Alternatively you can switch to a STRING, I have observed that the history is displayed after the first letter is being entered (maybe dependent on GUI version, who knows...)
    Thomas

  • How to ceate a new Country key,currency ,version and value type for report

    hi,
    can you please let me know How to ceate a new Country key,currency ,version and value type for report
    along with tables and tcodes.
    thanking you

    Not clear on your comments
    How to ceate a new Country key,currency,
       version and value type for report
    because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
    Can you let us know you want to develop a report and if so, from which transactions, you want to take datas.  You have to be clear on this.
    thanks
    G. Lakshmipathi

  • IP: How to hide currency/unit from input-ready query headers?

    Hi,
    Is there a way to hide currency/unit from input-ready BEx web query headers? I've used NODIM-concept for read-only reports, but with input-ready it won't work since formulas cannot be input-ready. Is there a setting somewhere or workaround? The web query is published by WAD.
    Thanks!
    Aki

    Hi Aki,
      If you wanna do this in input-ready query, there is only one scenario: you restrict 0UNIT and 0CURRENCY as one certain constant value for the 'Characteristic Restrictions' in the 'Filter', and DON'T set the according 'Can Be Changed at Execution' selected. Then the 0UNIT and 0CURRENCY can be put into 'Free Characteristics', no neccessary moving them to data area.
      If there're multiple value for 0UNIT or 0CURRENCY for your planning, you can't hide them in data area of INPUT-READY query, since they belong the dimension 'U'.
    Hope this will help.
    Gerald

  • How to handle currency & unit fields in call transaction?

    Hi,
    Can any one tell me How to handle currency & unit fields in call transaction? & how to dael with error for this fields? whith some sort of coding.
    Thanks In Advance.
    Pravin

    Hi Pravin,
    The same topic has been discussed in the following thread:
    How to handle currency & unit fields in BDC recording method?
    Regards,
    Chandra Sekhar

  • How to display struts form list values?

    HI,
    How to display struts form list values?
    I am having master and child data.
    I can set list values master and child in action class.
    How to display the master and child data in struts jsp form.
    <logic:iterate id="result" name="listofEmployees" >
    <td ><bean:write name="result" property="id"/></td>
    <td ><bean:write name="result" property="name"/></td>
    <td > <bean:write name="result" property="list"/>  </td>
    </tr>
    </logic:iterate>Here I am displaying master data succesfully.
    How to iterate values of <td ><bean:write name="result" property="list"/></td>in action class i added bean class to this list.
    how to iterate this list with java bean and display my child data
    Thanks
    sai

    Struts 1 or 2?
    I guess 2 'cause you're just talking about Action, without mentioning the Form.
    In STRUTS 1 it goes like this: forward to the page and use logic:iterate tag. Don't know about STRUTS 2, but It shouldn't be too different.
    bye.

  • How to Display  'purchase order text' in MM03 using report program

    Hi Friends,
    Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
    'Purchase order text' tab displays purchase long text of particular material .
    I coded as:
          SET PARAMETER ID 'MXX' FIELD 'E'.
          SET PARAMETER ID 'MAT' FIELD k_final-matnr.
          SET PARAMETER ID 'WRK' FIELD k_final-werks.
          CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
    It displays Purchasing tab other than Purchase Order Text tab of MM03.
    Please suggest me how can i solve this.
    Is there any parameter id to set values for Purchase Order text tab

    >
    Madhu Mano Chitra wrote:
    > I want how to navigate to MM03 'Purchase Order text'  tab/ view using ABAP code.
    > could any suggest me
    You can call a transaction and pass it a BDC table that tells it where you want it to go.  You have to work out for yourself what to put into the BDC table.  The code below works for tcode CATSSHOW.
    DATA: bdcdata_wa  TYPE bdcdata,
          bdcdata_tab TYPE TABLE OF bdcdata.
    DATA opt TYPE ctu_params.
       CLEAR bdcdata_wa.
        bdcdata_wa-program  = 'CATSSHOW'.
        bdcdata_wa-dynpro   = '1000'.
        bdcdata_wa-dynbegin = 'X'.
        APPEND bdcdata_wa TO bdcdata_tab.
        CLEAR bdcdata_wa.
        bdcdata_wa-fnam = 'SO_STATU-LOW'.
        bdcdata_wa-fval = '20'.
        APPEND bdcdata_wa TO bdcdata_tab.
        CLEAR bdcdata_wa.
        bdcdata_wa-fnam = 'ANDZEIT'.
        bdcdata_wa-fval = SPACE.
        APPEND bdcdata_wa TO bdcdata_tab.
        CLEAR bdcdata_wa.
        bdcdata_wa-fnam = 'PAST'.
        bdcdata_wa-fval = 'X'.
        APPEND bdcdata_wa TO bdcdata_tab.
        IF p_selscr = SPACE.
           CLEAR bdcdata_wa.
           bdcdata_wa-fnam = 'BDC_OKCODE'.
           bdcdata_wa-fval = '=ONLI'.
           APPEND bdcdata_wa TO bdcdata_tab.
        ENDIF.
        opt-dismode = 'E'.
        opt-defsize = 'X'.
    CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

  • How to display subtotals in separate column in alv report?

    hi,
    I am displayed the subtotals  for QUantity field BDMNG in Reuse_alv_grid_display  in the same column.
    but I want to display subtotal in separate column.
    How to display subtotals in separate column in alv report?
    thanks&regards.
    samba.k

    Hi
    As far as i know you can't do this,the option you have is to create one more column (subtotal) and populate it by manual calculation at every subtotal (not alv subtotal but yours) .
    Best Regards
    Yossi

  • How to eliminate # for empty date value in BEx Analyser

    Hi Gurus,
    Can any one please let me know how to eliminate # for empty date value in BEx Analyser.
    Thanks in advance
    peter

    Hi
    add the following macro to your workbook (template workbook):
    Sub SAPBexonrefresh(qstring As String, resultArea As Range)
    For Each c In resultArea
    If LCase(c.Value) = "not assigned" Then c.Value = ""
    Next
    End Sub

  • How to display multi line headings in procedural alv report

    Hi experts,
    How to display multi line heading in alv( procedural alv report) report.
    some columns single line and some columns multi line in the same report.
    ex: 
                  solvent consumed          solvent recovered
                   fresh |   recovery             recovery | spent                            batch no                         storage
    I am using procedural alv .pls give me idea.

    Hi Ram,
    Check the sample report [how to display multi line headings in procedural alv report|http://sample-code-abap.blogspot.com/2008/01/printing-multiple-line-header-and.html]
    Thanks,
    Duy

  • How to remove unassigned(#) value in bex report in 04s

    Any help on hiding/ removing unassigned(#) value in bex report in 04s , the query is created on an infoset( left outer join).

    you can exclude # in your restriction...
    assign points if it helps

Maybe you are looking for