How to display error message with some variable

Hi
I want to display errror message along with material number which is thr in d LOOP .
Basically i want some variable to display along with error message .
Can anybody suggest me how can i go about it?
Edited by: sonal musale on Apr 14, 2009 12:06 PM

Hi,
In the message class, suppose you use 001 for invalid material message.
So keep it like:-
Invalid Material : &1
in the message class for 001.
Now in loop use as:-
loop at itab into wa.
"perform validations
"if validation fails for current material
MESSAGE e001 WITH wa-matnr.
endloop.
Similary you can use more variables:-
Invalid Material : &1 &2 &3
MESSAGE e001 WITH <variable1> <variable2> <variable3>.
Hope this helps you.
Regards,
Tarun

Similar Messages

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display error messages in BAPI_PO_CHANGE with PO and item ?

Hello Friends,
I am calling BAPI_PO_CHANGE to update delivery flag for 50 POs.
Each PO has 4 line items. For ex.
10001 10 5.00 material1 X
10001 20 45.00 material2 X
10001 30 22.00 material15 X u201Cerror
10001 40 45.00 material41 X
10002 10 46.00 material17 X
10002 20 25.00 material3 X u201Cerror
10002 30 75.00 material5 X u201Cerror
10002 40 44.00 material8 X
u2026u2026u2026u2026u2026..
u2026u2026u2026u2026u2026
Now, suppose some line items have error.
I am able to get it from BAPIu2019s RETURN table.
But how can I display that error message with PO and line item?
NOTE : I am calling BAPI_PO_CHANGE for each PO with ITEM internal table.
Please guide me.
Regards
RH

The it_change_return fields parameter and row identify the PO_ITEM.
Try this...
*& Form READ_MESSAGES_OP_CHANGE
 BAPI_PO_CHANGE Return messages
FORM read_messages_op_change .
DELETE it_change_return WHERE type = 'W'.
DELETE it_change_return WHERE type = 'I'.
LOOP AT it_change_return ASSIGNING <is_change_return>.
 IF <is_change_return>-type = 'E'.
 z_error_flg = 'X'.
 ENDIF.
 v_item = v_item + 1.
 it_log_mess-packagenr = v_packagenr.
 it_log_mess-object = v_object.
 it_log_mess-docnum = v_docnum.
 it_log_mess-itemnr = v_item.
 it_log_mess-type = <is_change_return>-type.
 it_log_mess-id = <is_change_return>-id.
 it_log_mess-mnumber = <is_change_return>-number.
 IF <is_change_return>-parameter <> 'POITEM'.
 it_log_mess-message = text-po1.
 REPLACE '&' WITH z_po_number INTO it_log_mess-message.
 CONCATENATE it_log_mess-message <is_change_return>-message
 INTO it_log_mess-message SEPARATED BY space.
 ELSE.
 READ TABLE it_change_poitem ASSIGNING <is_change_poitem>
 INDEX <is_change_return>-row.
 it_log_mess-message = text-pr2.
 REPLACE '&' WITH z_po_number INTO it_log_mess-message.
 REPLACE '@' WITH <is_change_poitem>-po_item
 INTO it_log_mess-message.
 CONCATENATE it_log_mess-message <is_change_return>-message
 INTO it_log_mess-message SEPARATED BY space.
 ENDIF.
 it_log_mess-message_v1 = <is_change_return>-message_v1.
 it_log_mess-message_v2 = <is_change_return>-message_v2.
 it_log_mess-message_v3 = <is_change_return>-message_v3.
 it_log_mess-message_v4 = <is_change_return>-message_v4.
 APPEND it_log_mess.
ENDLOOP.
ENDFORM. " READ_MESSAGES_OP_CHANGE

How to catch error message inside a variable?

Hi,
I'm trying to catch the error message inside a variable using this this command below:-
<%=odiRef.getPrevStepLog("MESSAGE")%>
Could you please tell me what is the right approach to capture the error message inside a variable.
Thanks
Anindya

Hi Bhabani,
I have done this and select an oracle schema.But the variables only captures the (null).Please look into this.You must have one step prior to this refresh variable. Then only it can get the status as given below.
Returns the one-letter code indicating the status with which the previous step terminated. The state R (Running) is never returned.
D: Done (success)
E: Error
Q: Queued
W: Waiting
M: Warning
If you want the complete error details then you will face issues in case of multi line message. For this best option would be jython variable.Could please provide me some idea how to use this jython variable.I will update you on this soon
Thanks
Anindya

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
 rec(150) type c,
 end of tdata,
 begin of tmtgp,
 costcent LIKE CCSS-KOSTL,
 costelem LIKE CCSS-KSTAR,
 fisyear LIKE CCSS-GJAHR,
 jan(10),
 feb(10),
 mar(10),
 apr(10),
 may(10),
 jun(10),
 jul(10),
 aug(10),
 sep(10),
 oct(10),
 nov(10),
 dec(10),
 end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
 exporting static = 'X'
 changing file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(04)'
 fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field using 'KPP0B-VALUE(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '=CSPB'.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(01)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jan to fieldval.
perform bdc_field using 'Z-BDC03(01)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(02)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-feb to fieldval.
perform bdc_field using 'Z-BDC03(02)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(03)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-mar to fieldval.
perform bdc_field using 'Z-BDC03(03)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-apr to fieldval.
perform bdc_field using 'Z-BDC03(04)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(05)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-may to fieldval.
perform bdc_field using 'Z-BDC03(05)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jun to fieldval.
perform bdc_field using 'Z-BDC03(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(07)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jul to fieldval.
perform bdc_field using 'Z-BDC03(07)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(08)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-aug to fieldval.
perform bdc_field using 'Z-BDC03(08)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-sep to fieldval.
perform bdc_field using 'Z-BDC03(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(10)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-oct to fieldval.
perform bdc_field using 'Z-BDC03(10)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(11)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-nov to fieldval.
perform bdc_field using 'Z-BDC03(11)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-dec to fieldval.
perform bdc_field using 'Z-BDC03(12)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
 exporting filename = filename
 filetype = 'ASC'
 tables data_tab = idata
 exceptions file_open_error = 1
 file_read_error = 2
 no_authority = 6
 others = 17.
 check sy-subrc = 0.
 loop at idata.
 clear imtgp.
 split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
 append imtgp.
 endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
 mode 'N'
 MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
 t_bdcmsgcoll-msgid = <Msg id> AND
 t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
 t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
 t_success-message = g_mesg.
 APPEND t_success.
 CLEAR t_success.
ELSE.
* If there an Error-Do this..
 READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
 IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
 CLEAR g_mesg.
 t_error-msg = g_mesg_incl.
 APPEND t_error.
 CLEAR t_error.
 ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
 t_bdctab.
REFRESH: t_bdcmsgcoll[],
 t_bdctab[].

How To Display Error Message In Self Service Page

Dear All,
I am using 11.5.10 Oracle HRMS self Service ,,,
How can I display error message on the top of the self service page if some action happen ?
Best Regards

Time entry rules maybe?

How to display error message in Billing Output Type (VF03).

Hi,
could anyone suggest how do i display error message via billing (VF03) output type?

i want to display an error message from my sapscript program.
*determine discount
it_zmas-discount = it_zmas-gross_value - zkwert.
MODIFY it_zmas.
ELSE.
MESSAGE ID 'Z0' TYPE 'S' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for ' wa_zmas-matnr.
p_proc_screen = 'X'.
ENDIF.
when user enter billing doc no in vf03, user will click 'issue output type' and select their output type to be printed out.
if there's an error in the print program, it should promt out an error message and do not allowed user to print preview and print the form out.
what i had did previously, i prompt the error message and disable the print preview button. i think its not a good solution and i am not sure how to stop the form from not printing it out.
i was wondering is there any user exit of the output type, vofm (which i had this solutions from my previous question, but unsure how to use it) or any other solutions.
please help.

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
 PERFORM bedat_validate. " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate . " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
 EXPORTING
 i_datum_bis = s_bedat-high
 i_datum_von = s_bedat-low
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
 IMPORTING
 e_tage = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
 IF diffr GT 31.
 MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
 LEAVE TO LIST-PROCESSING.
 ENDIF.
ENDIF.
ENDFORM. " BEDAT_VALIDATE

How to display error message in case of function module ?

In the report i was using " message-id " to display error message....
how to use in function module ?

Hi,
Messages in Function Modules and Methods
Messages have two different functions in function modules and methods:
Normal Messages
If you use messages in function modules and methods without the RAISING addition in the MESSAGE statement, and the caller does not catch the message, the message is handled
normally according to the context in which it is called within the function module or method.
Triggering Exceptions with Messages
If you use messages in function modules and methods with the addition
... RAISING <exc>
the way in which the message is handled depends on whether the calling program handles the exception <exc> or not.
If the calling program does not handle the exception, the message is displayed and handled according to the context in which it occurs in the function module or method from which it
was called.
If the calling program handles the exception, the message is not displayed. Instead, the procedure is interrupted in accordance with the message type, and processing returns to the calling program. The contents of the message are placed in the system fields SY-MSGID, SY-MSGTY, SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Catching Message in the Calling Program
You can catch messages from function modules that are not sent using the RAISING addition in the MESSAGE statement by including the implicit exception ERROR_MESSAGE in the
EXCEPTIONS list of the CALL FUNCTION statement. The following conditions apply:
Type S, I, and W messages are ignored (but logged during background processing)
Type E and A messages trigger the exception ERROR_MESSAGE
Type X messages trigger the usual runtime error and short dump.
Catching messages is not currently supported for methods.
Regards,
Bhaskar

How to display Error message in USEREXIT_NUMBER_RANGE ?

Hi All,
- We are using subroutine USEREXIT_NUMBER_RANGE in include RV60AFZZ to override the existing number range.
- For this, we have created a maintenance view, where number ranges are stored w.r.t Sales Org and Billing document type.
- If a number range is not found in this maintenance view, we display an error message "Number range not found"
If we create billing document from transaction everything works fine.
But, what we want to know is:-
How do we give error message if Billing documents are being created in Batch Input job ?
OR
How to add message to log of batch input job?
Regards,
Ashish

Thanks Gary, for the reply.
But, we dont want the batch job to stop, we want it to continue with the next record.
In that case we believe writing the error to an application log would be better, isnt it ?
Also, how is it possible to just return an error code to the batch program (without writing an application log) from where the current user exit was called ?
Regards,
Ashish

How to display error message in Popup window

Hi,
I have main view and when I click button I opened new pop up window.
I have some validation for the form in pop up window. I want to display the error message in pop up window.
Please let me know how to get it.
Thanks

Hi mami,
Is is very difficulty to request focus to the POP window..in our case we are trying lot of time ..but we are not success to display massage in pop window.
you will put TEXTView in you pop window where you want to display massage in you POPWINDOW.
and Create one context value Attribute as Massage
Value Attribute-----ErrMassage.
ErrMassage Attribute set your Text property of TEXTVIEW UI Element.
If(your condition is TRUE){
//Excute Your code perfectly.
else
wdContext.currentContextElement().setErrMassage("Please provide proper name");
In this way we were this massage showing in our popwindow..
thanks
jati

How to display error messages for Standard validators

I am designing a simple login application.I have two input text-fields,say,email and password.
In my JSF page i have following,
<h:inputText id="email" value="#{User.email}" >
<f:validateLength minimum="1" maximum="6"/>
</h:inputText>
 
Password: 
<h:inputSecret id="password" value="#{User.password}" required="true">
<f:validateLength minimum="1" maximum="5"/>
</h:inputSecret>
Now if the user does not enter anything in one or both of the text boxes i.e if null value is transfered to the server,
I want the JSF to display some error message to the user that he has not filled up all the fields correctly.
Even i tried with something like,
<h:message for="email"/>
but still it does not work.
I am using JSF1.0 Final.
Well this problem was dam simple with JSF1.0 beta beacause of the existence of <h:output_errors>.
Is there any such facility with JSF1.0 final?

Your h:inputText does not contain required="true". I guess, it should. Otherwize, validateLength will not work.

How to display Error Message in APEX from Database Stored Procedure

Hello,
Using APEX version 3.2
DB version 9.2.0.8.0
Internet Explorer version 6
I have an After Submit Page Process that calls a stored procedure. In the exception section I'm using dbms_output.putline to display an error message, but the error message is not displayed in APEX. How can I have the error message generated from the stored procedure display in APEX?
Thanks so much.

Hi Apex_Noob,
I created On Load - Before Header process that uses apex_application.g_notification := :P3_ROLE;I'm sorry but I'm not sure what you mean by "instead of using dbms_output.putline use :P1_ITEM"
I have the following code in my stored procedure
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Role does not exist');Thanks.

How to display error message in BSP

Hi,
I am working on a BSP application where I want to display some error messages if a particular validation fails.
I have written the code for adding the message using CL_BSP_MESSAGES->ADD_MESSAGE in event DO_HANDLE_EVENT. The message passed is added successfully in table M_MESSAGES in method ADD_MESSAGE . But I want to know what code should be written in the layout to display this error message.

Hi,
In javascript you have to do validation(Eror Message) below is the sample code for message
var yourwords = "Enter Carrid"    !';
vae speed = 500;
var control = 1;
function flash()
if ( control == 1 )
windows.status = yourwords ;
control = 0;
regards
krishnakiran
Edited by: Krishna KiranN on Dec 12, 2011 11:53 AM

How to display error message in front end application

Hi Expert,
I have one concurrent program that used to activate and deactivate the responsibilities ,
I want that if any error occured in this program then how can I display the error message in application front end.
Thanks in advance.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display error message with some variable

Similar Messages

Maybe you are looking for