How to display field Functional Location Field in Asset Master Data

Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
Frans

Dear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at 
present and consequently is not supplied.                               
In particular, you cannot use the field as a criterion for a selection  
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.                                                        
regards Bernhard

Similar Messages

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • Field in asset Master data "Planned retirement on / control

    Hi all,
    I would like to know how to deactivate the control for the field "Planned retirement on"?
    The control is the following "Simulate only to planned retirement" indicator in the selection screen of the given standard report.
    Where can I found this indicator?
    Thanks for your help!
    Cheers,
    Karim

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How can i add STORAGE LOCATION field which is not...............

    hi,
    sap gurus,
    good morning to all,
    how can i add STORAGE LOCATION field which is not in the standard tables namely
    KOMP, KOMK, and KOMG.
    how to include it in our FIELDS FROM FIELD CATALOGUE.
    if we include this field is there any impact on the standard tables.
    plz let me know this.
    bcz
    we are selling our products in two ways
    (1). one is straight from factory ie direct sales from factory
    if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
    deliver him which ever is economical either rail or road.
    before coming to second case of selling the goods
    we will do STOCK TRANSPORT ORDER from plant to different storage locations.
    if we did STO thru road we have to sell the goods thru road only.
    if we did STO thru rail we have to sell the goods thru rail route only.
    (2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
    location which is not registered under excise.
    if the goods came by road then it will be delivered by road only.
    if the goods came by rail then it will be delivered by rail only.
    my logic here is
    basing on the
    storage location, transportation types, and distance i want to create condition record
    that captures exact frieght at the sales order level.
    confirm whether i am right or wrong.
    regards,
    balaji.t
    09990019711.

    Hi,
    It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
    But if you have no choice expcept to change the standard tables to meet your requirement -  then you need an access key to modify the object, which is available from the market place.
    Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
    Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
    REWARD POINTS IF HELPFUL
    Regards
    Sai

  • Functional Location field is Grayed out in change mode

    Dear Experts ,
    I have created an equipment automatically  through serial number managed material .
    But the equipment created has no functional location assigned to it .
    Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
    Pls tell me how can i assign a functional loaction to this automatically created equipment ??
    Regards
    Anis

    Hello Thyagrajan ,
    In IMG ...
       Equipments --> Equipment Uasge Period --> Define Installation at functional Location
    I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
    Is ther anywhere else in IMG that i need 2 assign/check .
    while trying 2 assign a functional location for this equipment the system give the error :
    No InstallLocation entered: Data transfer not possible
    Message no. IA036
    Regards
    Anis
    Edited by: anis bazmi on Oct 26, 2009 9:48 AM

  • Activation of Function Location field in Fleet Objects

    Dear All
    In Fleet Management, the Function Location field is inactive by standard. How can we make the Function Location field active for usage?
    Regards
    BK

    hi
    For your equipment category mark the installation at functional location in T code OIEP
    regards
    thyagarajan

  • How to display the selection screen fields for selected checkboxes

    Hi all,
             I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
    and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
    Thanks
    sriman.

    hi,
    Try this code
    report z_13317_sdn2.
    tables : mara, marc, dd03l.
    parameters : p_chk1 as checkbox user-command ABC,
                 p_chk2 as checkbox user-command PQR,
                 p_chk3 as checkbox user-command XYZ.
    select-options : s_matnr for mara-matnr modif id A,
                     s_ersda for mara-ersda modif id A,
                     s_werks for marc-werks modif id B,
                     s_lvorm for marc-lvorm modif id B,
                     s_tab for dd03l-tabname modif id C.
    data: v_chk1,
          v_chk2,
          v_chk3.
    at selection-screen output.
      loop at screen.
        if screen-group1 = 'A' or
           screen-group1 = 'B' or
           screen-group1 = 'C'.
            screen-input = 0.
           modify screen.
        endif.
      endloop.
      loop at screen.
        if v_chk1 = 'X'.
          if screen-group1 = 'A'.
            screen-input = 1.
            modify screen.
          endif.
        endif.
        if v_chk2 = 'X'.
          if screen-group1 = 'B'.
            screen-input = 1.
            modify screen.
          endif.
        endif.
        if v_chk3 = 'X'.
          if screen-group1 = 'C'.
            screen-input = 1.
            modify screen.
          endif.
        endif.
      endloop.
    at selection-screen.
      if sy-ucomm = 'ABC'.
        if v_chk1 = ' '.
          v_chk1 = 'X'.
        else.
          v_chk1 = ' '.
        endif.
      endif.
      if sy-ucomm = 'PQR'.
        if v_chk2 = ' '.
          v_chk2 = 'X'.
        else.
          v_chk2 = ' '.
        endif.
      endif.
      if sy-ucomm = 'XYZ'.
        if v_chk3 = ' '.
          v_chk3 = 'X'.
        else.
          v_chk3 = ' '.
        endif.
      endif.
    Regards,
    Sailaja.

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • Displaying Evaluation groups field in the asset master data

    Dears,
    The Evaluation group fields in the allocation tab in the asset master data was not displayed in the layout, is there is any harm of displaying it in the production system after 3 years from Go-live.
    i think it should not make any harm, i just want to confirm.
    Regards,
    Ahmed Samir

    Salam Ahmed
    There is no harm.. These fields are used for reportng. They dont impact the process in any way
    Br, Ajay M

  • How to count of Functional Locations

    Hello Experts,
    Could you please advise me how to count a Functional Locations in Plant Maintenance module?
    I would like to find and amount of Functional Locations which are::
    1. Assigned for particular plant
    2. In status Active
    3. In status inactive
    4. In status Deletion flag
    I was trying to perform this by search in table IFLO but there is no way to filter by statuses and I'm not sure if this table is a good place for such query because the amount of FLocs was much more higher than I expected.
    Thanks in advance for valuable answers:
    Lukasz Kurlit

    Hi Lukasz
    Indeed you can use IH06 to get Functional Location's List with your classification.
    so, to get the information about the sum of it, I admit there is no a real function to count the Functional Locations, but you can do as follow :
    1. Get The List of your classification with IH06, then
    2. Get the sum of your classification by click on 'Spreadsheet' or press 'Shift + F4' from your keyboard
         (Just like to export the list into spreadsheet)
    3. They will give you the information about the sum of the list you want to export.
    I hope it can be a help for you.

  • Displaying the function location no. in task bar

    Hi All,
    Please help me in displaying the function location no. in task bar as message.
    Following is the code I am using :-
    CALL FUNCTION 'ENQUEUE_EZIFLO'
        EXPORTING
            MODE_IFLOT     = 'E'
            MANDT          = SY-MANDT
             TPLNR          = IFLOT-TPLNR
            X_TPLNR        = ' '
            _SCOPE         = '2'
            _WAIT          = ' '
            _COLLECT       = ' '
       EXCEPTIONS
             FOREIGN_LOCK   = 1
             SYSTEM_FAILURE = 2
             OTHERS         = 3
    IF sy-subrc <> 0.
    write : IFLOT-TPLNR.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH IFLOT-TPLNR.
    ENDIF.
    Thanks
    Gautam

    Hi Gautum,
    keep the message type as 'S' it will show the message in the task bar,,
    MESSAGE ID SY-MSGID TYPE SY-MSGTY   "Pass it as 'S"
    NUMBER SY-MSGNO
            WITH IFLOT-TPLNR.
    Regards,
    Prabhudas

  • Is it normal that the DataSource field is blank when opening a master data

    Is it normal that the DataSource field is blank when opening a master data which is also an InfoSouce in InfoSource page.
    Just locate an InfoSource which is also a master data or data target where next to which is a green triangle picture icon in InfoSource page, open it, the top part (Commnication Structure) is automatically expended.  Expend the lower part "Transfer_Structure/Transfer_Rules", find the DataSource field is blank.  This only occurs for an InfoSource which is also a master data which have more than two data loads (e.g., one is attibute, and the other is text load) or there are two InfoPackage loads for this master data.  We checked for master data with only one InfoPackage under it (e.g., only text load) and find it's OK that the datasource field is not blank when expending the lower section.
    Thanks

    Kevin
    It's not common. If you have three Data Sources like attributes, texts and hierarchy by default attribute data source will appear on the screen and for the rest of the things we need to do dropdown and select. This is how in general it appears.
    Thanks
    Sat

  • Add field group to Asset Master Data Screen Layout

    Hi Gurus !!
    Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
    Thanks a lot,
    Sasha

    I don't think you can add a funds center to the Time dependent tab.
    Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center.

Maybe you are looking for

  • SAP Best Practice document for Extended Warehouse Management

    Hi, Does SAP have any Best Business Practice document for SCM Extended Warehouse Management solution? Request to please provide me link if any? Thanks and Rgds,

  • OVD question -- Hiding selected nodes

    Hi, This is what my OVD DIT looks like: Join View Adapter: Primary Adapter: OID Join Adapter: AD The resulting DIT looks like this: dc=company,dc=com - cn=OracleContext - cn=Calendar Server - cn=Users - cn=Groups - ou=Oblix I would like to expose onl

  • Can't Login to FaceTime for Mac

    On my MBP I click on the "sign in" button and it flips back to the same login screen on FaceTime and asks again to sign in.  It will not sign in at all.  It's been like this for over a month now but used to work just fine (using the exact same login)

  • Error javax.mail.NoSuchProviderException: pop3

    When my application runs within JBuilder everything works fine. But with a native executable I get the following error: javax.mail.NoSuchProviderException: pop3. The Dependencies property for JavaMail=Include Dependencies. When set to Include All the

  • Having trouble opening flash help/f1 in cs6

    This is so stupid I can't get any help I need from any one I don't know what I am even doing here. I have tried to contact adobe but all they want you to do is join or become a member of their boards and that is it. I am having trouble opening flash