How to display full filename

Sorry, I know it was talked about before but I can't find it.
How do you get Aperture to display the full filename under the photo in grid or other view's that includes .nef or .jpg?
PowerBook G4   Mac OS X (10.4.6)  

first, check which Metadata set your View Options for Grid are set to; i.e., choose View Options from View.
next, add (and reorder) File Name from the Metadata/Other popup tab to your Metadata set. that will include the extension.
if you wish, remove the version name from the set.
if your thumbnails are small, you might not see the whole file name under the thumbnail in the grid. in fact, you might not see it at all!

Similar Messages

  • How to display .lvm filename in data portal?

    When I drag a .lvm file to the data portal, it lists it as 'LabVIEW_Data' rather than the filename that I dragged there. When I drag another .lvm file it lists it as 'LabVIEW_Data2'. How can I get it to display the filenames that were dragged there instead of a generic 'LabVIEW_Data'?

    Hi Dewey,
    Unzip the below attached two VBScript files somewhere on your hard drive where you're willing to leave them.  Then run the "Custom LVM Load.VBS" in DIAdem SCRIPT.  Now drag a new LVM file into the Data Portal.  You should see the Group take on the name of the LVM file.  The custom load event only renames the Group if the channels in that last Group were loaded with the "LVM" DataPlugin.
    You can configure your DIAdem to always start with the "Custom LVM Load.VBS", declared as part of DIAdem's launch cycle, by editing the "Start Script" field in the "General Settings" dialog and then saving the settings prior to shutting down DIAdem.
    Ask if you have further questions,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments
    Attachments:
    Custom LVM Load.zip ‏1 KB

  • How to display full screen in landing page

    Hi,
    I'd like to create a landing page with own menu bar above, and open the iView in the frame.
    any idea how to do this ?
    ex.
    menu  My Company My Customer
    iView column 1                   iView column 1
    invoices                                  order
    Customers                              material
    when I click on the iView ex. Invoices, the iView shall display in full screen, but the main menu remain,
    layout shall look like this :
    menu  My Company My Customer
    invoice content
    XXXXXXXXXXXXXXXXXXXXXXXXX
    Kr,
    Ben.J.

    no, I have already use this but didn't solve the problem.
    it will open one column in full screen of the column1 iFrame.
    the layout became :
    Menu                      My company                                                  My Customer
                                 column1                                                              column2
    iView                   invoice                                                                 order
                               xxxxxxxxxxxxxxxxxxxxxxxx                              products
    intead of
    Menu                      My company                                                     My Customer
                                 column1                                                          
    iView                   xxxxxxxxxxxxxxxxxxxxxxxx                          
    Kr,

  • How to Display Full URL in Address Bar?

    I'm using Firefox 14.0.1 on a new computer running Windows 7 Home Edition. I cannot for the life of me figure out why my URLs are getting truncated. For instance, right now, all I can see in my address bar for this website is "https://support.mozil;" if I type in yahoo.com I end up with "http://www.yahoo.co." I can scroll through in the address bar to see the rest of the URL, but I'd like to see the whole thing at once!
    I know you can type about:config into the address bar and change the value of browser.urlbar.trimURLs to false, but I tried that and it doesn't do a thing. I have Firefox on my old computer, and it's not giving me the issue there. So perhaps I have an interfering plugin? The only new thing I have on this system is HP SimplePass (I can't stand HP software). Anyone know what might be causing the issue?

    I, too, had the truncated URL in the address bar. (Firefox 16.0.2 on Windows 7 Home Premium)
    These measures did not help:
    # about:config and change browser.urlbar.trimURLs to false
    # Help > Troubleshooting Information > Reset Firefox
    This measure did help:
    # uninstall HP SimplePass
    I had had the full URL in the address bar while running HP SimplePass, so I do not believe that they are inherently incompatible. I'm just saying these measures, in this order, gave me back the full URL.

  • When listing directory on a website, filename list is only 23 chars, including "... ". How to increase to full filename?

    When listing directory on a website, filename list is only 23 chars, including "...>". How to increase to full filename? Full filename is displayed in notification bar at bottom of window, but only when mouse hovers over trunched filename.
    == This happened ==
    Every time Firefox opened
    == always

    Can you provide an example of where that happens - the URL?

  • How do I get my contact's photos to display full screen for incoming calls?

    I noticed today that when I get an incoming call it no longer displays "full screen".  I keep missing calls because it now only displays as a banner at the top of the screen that someone is calling and their photo (if I've assigned one to them) is a tiny thumbnail. 
    Did I only just notice now that this is another 'great upgrade' with the new IOS, or is this some weird glitch with my phone?  I've been wondering how I've been missing calls in the past week, but just happened to catch it today after I had been using the new map app and wasn't sure if it was just a coincidence or if it's somehow connected..? 
    Is there any way to change this or am I stuck with it this way??

    I've never added my contact on my computer, I've always done it through my phone (I didn't know you could do it through the computer).  The problem is not the photo, it's that the call doesn't come in and take up the full screen.  Now when a call comes in, it displays as a banner at the top of the phone where the time and date normally would be, so I don't notice anyone's phoning. 
    As far as I can recall, it's only started happening since yesterday after I used the new map app.  I've checked my notifications settings and the phone settings and so far as I can see, everything is set the same way it always was.  I checked my hubby's phone to see if it's maybe something new since this last update to IOS6, but the call displays full screen (regardless whether the contact has a photo associated to it or not) and not a banner at the top of the screen like mine.
    I still don't know how to change this back.  Any other suggestions?

  • How to display contact person full screen photo in making a call or receive call

    How to display contact person full screen photo in making a call or receive call

    Apple have removed the full screen contact image calling in 7.1, they come with default icon. Hope they bring back that option in next, you can also leave feedback @http://www.apple.com/feedback/

  • How to display my input history values on Filename filed (selection screen)

    Hi All,
    Please let me know how to display my input history values under the field of selection screen.
    I created Zprogram as below.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
      PARAMETERS: P_FILE  TYPE RLGRAP-FILENAME OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK B1.
    I displayed a selection screen of my Zprogram, my cursor put on P_FILE field, and enter BACKSPACE key,
    so it doesn't display my input history values.
    Of course I've selected Local Data History 'ON' of my GUI option,
    so it's displayed my input history values on any other fields.
    If you know why, please let me know.
    Regards,
    Rie.

    In the GUI options, there is also a setting for the maximum length of fields for storing the history, maybe it is set to small, as your selection field is length 128.
    Alternatively you can switch to a STRING, I have observed that the history is displayed after the first letter is being entered (maybe dependent on GUI version, who knows...)
    Thomas

  • How do I get online help to display full screen when opened?

    I'm working in RoboHelp HTML 8 developing
    WebHelp. My client wants the help to display full screen (100%) when it's
    opened.
    How do I accomplish this?
    Thanks
    Mendonite

    If your just opening the html file from a link within your site, then you could code the link to open in a new window at full size. This is not done through RH, but instead on the site where its linking to your webhelp index.html page. Its relatively simple, and you can customise things like viewable buttons, scroll bars etc etc.
    have a look here:
    http://www.htmlcodetutorial.com/linking/linking_famsupp_87.html

  • 3G Nano: How do I get my photos to display full-screen?

    Hi,
    I have a 3G Nano.
    When I go into PHOTOS the left 1/2 of the screen is always taken up by the menu selections and I have not yet figured out how to get the photos to display full screen. What am I doing wrong?
    Please excuse... this is my first iPod...

    Select "All Photos" from the menu to the left of those half pictures. Press the center button and you will get "thumb nails of your photos. Run your finger around the touch wheel and a yellow box will highlight the picture. If you start with the first picture and press the center button again you will bring up a full screen pict. To go to the next pict use the touch wheel in a clockwise manner to see each pict. Go to back to the photo menu and go to settings to try out some neat tricks and even add music. Don't ever be worried about asking a question. The only dumb question is the one you didn't ask! I got my nano yesterday and I have some questions that the "help" didn't address also

  • How to display the Full Name in Masthead of the Portal

    Where exactly in the HeaderiView.jsp I need to edit to be able to display the full name in the Masthead of the portal.
    e.g.
    Welcome Paul Jones

    Hi Paul,
    Following customized code displays Full Names on my portal:
    private String GetWelcomeMsg(IPortalComponentRequest request, String welcomeClause)
        IUserContext userContext = request.getUser();
        if (userContext != null)
              String firstName = userContext.getFirstName();
              String lastName = userContext.getLastName();
              String displayName = userContext.getDisplayName();
              String salutation = userContext.getSalutation();
              if (displayName != null)
                   if(salutation != null)
                        return java.text.MessageFormat.format(welcomeClause, new Object[] {displayName, salutation, " "}).toString();
                   else
                        return java.text.MessageFormat.format(welcomeClause, new Object[] {displayName, " ", " "}).toString();
              else if ((firstName != null) && (lastName != null))
                   if(salutation != null)
                        return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, salutation}).toString();
                   else
                        return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, " "}).toString();
              else
                   return java.text.MessageFormat.format(welcomeClause, new Object[] {userContext.getUniqueName()," ", " "}).toString();          
        return "";
    Regards,
    Sergei

  • How to display the BI query in full area in Bex iView

    Hi to all,
    I have implemented BI query in Bex iView. While preview of iView the BI query is not displayed in full vertical and horizontally length.
    It is displayed in half horizontal and half vertical with scroll bar.
    Is there any way, I can display the BI query full length in horizontally and vertically in Bex iView.
    Does any setting required in iview, page, workset or roles so I can display BI query data in full area.
    I shall be thankfull to you for this.
    Regards
    Pavneet Rana

    Thanks for reply,
    i have created IVIEW and then assign it to PAGE and the assign PAGE to WORKSET and Created a ROLE and assign WORKSET to ROLE , then to user.
    i have also set the property of IVIEW and PAGE to
    Appearance - Size
    Height Type = Full_page
    But when i Preview the BI Query in Portal , the  horizontal height of BI query is not showing full .
    rather it is showing half Horizontal display of BI query with scroll bar.
    I need that BI query should display full in iview without scroll bar.
    Does any more setting in need to do, and where ?
    I shall be thankful to you for this.
    Regards
    Pavneet Rana
    Edited by: pavneet rana on Dec 20, 2010 2:33 PM

  • How to display URL images and URL link (html) from Smartforms?

    Hi Gurus,
    I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
    /people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
    My code is like this..
    <--- Start Code.
    FORM call_smartforms.
      DATA : lv_subject TYPE so_obj_des,
             lc_true(1) VALUE 'X',
             lw_control_parameters TYPE ssfctrlop,
             lw_output_options TYPE ssfcompop,
             lc_graphics(8) VALUE 'GRAPHICS',
             lw_xsfparam_line TYPE ssfxsfp,
             lc_extract(7) VALUE 'EXTRACT',
             lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
             lc_mygraphics(11) VALUE 'mygraphics/',
             lc_content_id(10) VALUE 'CONTENT-ID',
             lc_enable(6) VALUE 'ENABLE',
             lw_job_output_info TYPE ssfcrescl,
             lw_html_data TYPE trfresult,
             lw_graphics TYPE ssf_xsf_gr,
             lt_graphics TYPE tsf_xsf_gr,
             lv_html_xstr TYPE xstring,
             lw_html_raw LIKE LINE OF lw_html_data-content,
             lv_incode TYPE tcp00-cpcodepage VALUE '4110',
             lv_html_str TYPE string,
             lv_html_len TYPE i,
             lc_utf8(5) VALUE 'utf-8',
             lc_latin1(6) VALUE 'latin1',
             lv_offset TYPE i,
             lv_length TYPE i,
             lv_diff TYPE i,
             lt_soli TYPE soli_tab,
             lw_soli TYPE soli,
             lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
             lv_name TYPE mime_text VALUE 'sapwebform.htm',
             lv_xstr TYPE xstring,
             lw_raw TYPE bapiconten,
             lt_solix TYPE solix_tab,
             lw_solix TYPE solix,
             lv_filename TYPE string,
             lv_content_id TYPE string,
             lv_content_type TYPE w3conttype,
             lv_obj_len TYPE so_obj_len,
             lv_bmp TYPE so_fileext VALUE 'BMP',
             lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
             lc_doc_bcs TYPE REF TO cl_document_bcs,
             lc_bcs TYPE REF TO cl_bcs,
             lc_send_exception TYPE REF TO cx_root,
             lw_adsmtp TYPE lty_adsmtp,
             lv_mail_address TYPE ad_smtpadr,
             lc_recipient TYPE REF TO if_recipient_bcs,
             lc_send_request TYPE REF TO cl_bcs,
             lv_sent_to_all TYPE os_boolean.
      DATA : v_language TYPE sflangu VALUE 'E',
             v_e_devtype TYPE rspoptype.
      v_form_name = 'ZTEST_EMAIL'.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = v_form_name
        IMPORTING
          fm_name            = v_namef
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
    starting here. ***
    Set title for the output
      lv_subject = 'Smartforms.'.
    Set control parameters to "no dialog"
      lw_control_parameters-no_dialog = lc_true.
    IF lw_service_subject-code = lc_fm1.
    *--- To get output device type
      CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
        EXPORTING
          i_language    = v_language
          i_application = 'SAPDEFAULT'
        IMPORTING
          e_devtype     = v_e_devtype.
      lw_output_options-tdprinter = v_e_devtype.
      lw_control_parameters-getotf = 'X'.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
    Set output options
      lw_output_options-xsf        = lc_true.
      lw_output_options-xsfcmode   = lc_true.
      lw_output_options-xsfoutmode = 'A'.
      lw_output_options-xsfoutdev  = space.
      lw_output_options-xsfformat  = lc_true.
      lw_xsfparam_line-name  = lc_graphics.
      lw_xsfparam_line-value = lc_extract.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
      lw_xsfparam_line-name  = lc_graphics_directory.
      lw_xsfparam_line-value = lc_mygraphics.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
      lw_xsfparam_line-name  = lc_content_id.
      lw_xsfparam_line-value = lc_enable.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
    Get the smartform content
      CALL FUNCTION v_namef
        EXPORTING
          control_parameters   = lw_control_parameters
          output_options       = lw_output_options
    *pass other application specific parameters (eg order number, items ).
      IMPORTING
          job_output_info    = lw_job_output_info
      TABLES
          tt_tabh              = tt_tabh
          tt_tabb              = tt_tabb
          tt_tabf              = tt_tabf
      EXCEPTIONS
          formatting_error = 1
          internal_error   = 2
          send_error       = 3
          user_canceled    = 4
          OTHERS           = 5.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
      lw_html_data  = lw_job_output_info-xmloutput-trfresult.
      lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
      CLEAR lv_html_xstr.
      LOOP AT lw_html_data-content INTO lw_html_raw.
        CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
      ENDLOOP.
      lv_html_xstr = lv_html_xstr(lw_html_data-length).
      CALL FUNCTION 'SCP_TRANSLATE_CHARS'
        EXPORTING
          inbuff       = lv_html_xstr
          incode       = lv_incode
          csubst       = lc_true
          substc_space = lc_true
        IMPORTING
          outbuff      = lv_html_str
          outused      = lv_html_len
        EXCEPTIONS
          OTHERS       = 1.
    *HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
    *EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
      REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
    CALL METHOD html_control - >load_mime_object
       EXPORTING
         object_id  = 'ZWN'
         object_url = 'ZWN.GIF'
       EXCEPTIONS
         OTHERS     = 1.
      REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
    REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
       break mhusin.
      lv_html_len = STRLEN( lv_html_str ).
      lv_offset = 0.
      lv_length = 255.
      WHILE lv_offset < lv_html_len.
        lv_diff = lv_html_len - lv_offset.
        IF lv_diff > lv_length.
          lw_soli-line = lv_html_str+lv_offset(lv_length).
        ELSE.
          lw_soli-line = lv_html_str+lv_offset(lv_diff).
        ENDIF.
        APPEND lw_soli TO lt_soli.
        ADD lv_length TO lv_offset.
      ENDWHILE.
      CREATE OBJECT lc_mime_helper.
      CALL METHOD lc_mime_helper->set_main_html
        EXPORTING
          content     = lt_soli
          filename    = lv_name
          description = lv_subject.
      LOOP AT lt_graphics INTO lw_graphics.
        CLEAR lv_xstr.
        LOOP AT lw_graphics-content INTO lw_raw.
          CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
        ENDLOOP.
        lv_xstr = lv_xstr(lw_graphics-length).
        lv_offset = 0.
        lv_length = 255.
        CLEAR lt_solix[].
        WHILE lv_offset < lw_graphics-length.
          lv_diff = lw_graphics-length - lv_offset.
          IF lv_diff > lv_length.
            lw_solix-line = lv_xstr+lv_offset(lv_length).
          ELSE.
            lw_solix-line = lv_xstr+lv_offset(lv_diff).
          ENDIF.
          APPEND lw_solix TO lt_solix.
          ADD lv_length TO lv_offset.
        ENDWHILE.
        CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
        CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
        lv_content_type = lw_graphics-httptype.
        lv_obj_len      = lw_graphics-length.
    *Add images to the email
        CALL METHOD lc_mime_helper->add_binary_part
          EXPORTING
            content      = lt_solix
            filename     = lv_filename
            extension    = lv_bmp
            description  = lv_description
            content_type = lv_content_type
            length       = lv_obj_len
            content_id   = lv_content_id.
      ENDLOOP.
      TRY.
          lv_subject = lv_subject.
          lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
                   i_subject          = lv_subject
                   i_multirel_service = lc_mime_helper ).
        CATCH cx_document_bcs INTO lc_send_exception.
        CATCH cx_bcom_mime INTO lc_send_exception.
        CATCH cx_gbt_mime INTO lc_send_exception.
      ENDTRY.
    Create send request
      TRY.
          lc_bcs = cl_bcs=>create_persistent( ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
      TRY.
          lc_bcs->set_document( i_document = lc_doc_bcs ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
    Set-up email receiver
      lv_mail_address = '[email protected]'.
    TRANSLATE lv_mail_address TO UPPER CASE.
      TRY.
          lc_recipient = cl_cam_address_bcs=>create_internet_address(
              i_address_string = lv_mail_address ).
        CATCH cx_address_bcs INTO lc_send_exception.
      ENDTRY.
      TRY.
          lc_bcs->add_recipient( i_recipient = lc_recipient ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
    Send smartforms as HTML email
      TRY.
          lc_bcs->send( ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
      COMMIT WORK.
      WRITE:/ 'Mail sent'.
    ENDFORM.                    "call_smartforms
    End Code --->
    Thanks and Regards.

    1- put your images in a directory under the web app directory. Example: app/images/
    2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
    3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

  • How to display special characters in APEX Classic Report column

    Ref: Thread: How to display newline characters as new lines
    Version: APEX 3.2
    Hi,
    I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
    Thanks very much.
    Rohi
    Edited by: Rohi on 18-Jul-2012 04:21

    876651 wrote:
    Hi,
    Thanks for your response.
    I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
    This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
    But it is not displayed like it should be.
    I do not want the value to be displayed along with the html tags as a string.
    I want the html tags to take effect and highlight the value within it.
    Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
    So I changed it to 'No' and and it contained the html tags.
    I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
    You can't pass HTML and CSS around in URL parameters.
    I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
    decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
    I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
    <span style="color: #&P0_HIGHLIGHT.;">Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach...

  • How to display data from a recordset based on data from another recordset

    How to display data from a recordset based on data from
    another recordset.
    What I would like to do is as follows:
    I have a fantasy hockey league website. For each team I have
    a team page (clubhouse) which is generated using PHP/MySQL. The one
    area I would like to clean up is the displaying of the divisional
    standings on the right side. As of right now, I use a URL variable
    (division = id2) to grab the needed data, which works ok. What I
    want to do is clean up the url abit.
    So far the url is
    clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
    I want is clubhouse.php?team=Wings.
    I have a separate table, that has the teams entire
    information (full team name, short team, abbreviation, conference,
    division, etc. so I was thinking if I could somehow do this:
    Recordset Team Info is filtered using URL variable team
    (short team). Based on what team equals, it would then insert this
    variable into the Divisional Standings recordset.
    So example: If I type in clubhouse.php?team=Wings, the Team
    Info recordset would bring up the Pacific division. Then 'Pacific'
    would be inserted into the Divisional Standings recordset to
    display the Pacific Division Standings.
    Basically I want this
    SELECT *
    FROM standings
    WHERE division = <teaminfo.division>
    ORDER BY pts DESC
    Could someone help me, thank you.

    Assuming two tables- teamtable and standings:
    teamtable - which has entire info about the team and has a
    field called
    "div" which has the division name say "pacific" and you want
    to use this
    name to get corresponding details from the other table.
    standings - which has a field called "division" which you
    want to use to
    give the standings
    SELECT * FROM standings AS st, teamtable AS t
    WHERE st.division = t.div
    ORDER BY pts DESC
    Instead of * you could be specific on what fields you want to
    select ..
    something like
    SELECT st.id AS id, st.position AS position, st.teamname AS
    team
    You cannot lose until you give up !!!
    "Leburn98" <[email protected]> wrote in
    message
    news:[email protected]...
    > How to display data from a recordset based on data from
    another recordset.
    >
    > What I would like to do is as follows:
    >
    > I have a fantasy hockey league website. For each team I
    have a team page
    > (clubhouse) which is generated using PHP/MySQL. The one
    area I would like
    > to
    > clean up is the displaying of the divisional standings
    on the right side.
    > As of
    > right now, I use a URL variable (division = id2) to grab
    the needed data,
    > which
    > works ok. What I want to do is clean up the url abit.
    >
    > So far the url is
    clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
    > all
    > I want is clubhouse.php?team=Wings.
    >
    > I have a separate table, that has the teams entire
    information (full team
    > name, short team, abbreviation, conference, division,
    etc. so I was
    > thinking if
    > I could somehow do this:
    >
    > Recordset Team Info is filtered using URL variable team
    (short team).
    > Based on
    > what team equals, it would then insert this variable
    into the Divisional
    > Standings recordset.
    >
    > So example: If I type in clubhouse.php?team=Wings, the
    Team Info recordset
    > would bring up the Pacific division. Then 'Pacific'
    would be inserted into
    > the
    > Divisional Standings recordset to display the Pacific
    Division Standings.
    >
    > Basically I want this
    >
    > SELECT *
    > FROM standings
    > WHERE division = <teaminfo.division>
    > ORDER BY pts DESC
    >
    > Could someone help me, thank you.
    >

Maybe you are looking for